GOOD-ARK 1N5399

1N5391 THRU 1N5399
GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.5 Amperes
Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High surge current capability
1.5 ampere operation at TL=70 with no thermal runaway
Low reverse leakage
Construction utilizes void-free molded plastic technique
High temperature soldering guaranteed:
250 /10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3Kg) tension
Mechanical Data
DIM ENSIONS
Case: DO-15 molded plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.014 ounce, 0.39 gram
inches
DIM
mm
Min.
Max.
Min.
Max.
A
0.228
0.299
5.8
7.6
B
0.102
0.142
2.6
3.6
C
0.028
0.034
0.71
0.86
D
1.000
-
25.40
-
Note
Maximum Ratings and Electrical Characteristics
Ratings at 25
ambient temperature unless otherwise specified.
Symbols
1N
5391
1N
5392
1N
5393
1N
5394
1N
5395
1N
5396
1N
5397
1N
5398
1N
5399
Units
Maximum repetitive peak reverse voltage
VRRM
50
100
200
300
400
500
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
210
280
350
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
300
400
500
600
800
1000
Volts
Maximum average forward rectified current
0.500" (12.7mm) lead length at TL=70
I(AV)
1.5
Amps
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method) at TA=75
IFSM
50.0
Amps
Maximum instantaneous forward voltage at1.5A TA=70
VF
1.40
Volts
IR
5.0
300.0
A
Maximum DC reverse current
at rated DC blocking voltage
TA=25
TA=150
Typical reverse recovery time (Note 1)
Trr
2.0
S
Typical junction capacitance (Note 2)
CJ
15.0
F
50.0
25.0
/W
Typical thermal resistance (Note 3)
Maximum DC blocking voltage temperature
Operating junction temperature range
Storage temperature range
R
R
JA
JL
TA
+150
TJ
-50 to +170
TSTG
-50 to +175
Notes:
(1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
1
RATINGS AND CHARACTERISTIC CURVES
2