RL101 THRU RL107 GENERAL PURPOSE PLASITC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 250 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: A-405 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.23 gram DIM Maximum Ratings and Electrical Characteristics inches mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.020 0.024 0.5 0.6 D 1.000 - 25.40 - @25 Note unless otherwise specified Symbols RL101 RL102 RL103 RL104 RL105 RL106 RL107 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward current at TA=55 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave IFSM 30.0 Amps Maximum instantaneous forward voltage at IFM=1.0A; TJ=25 (Note 2) VF 1.10 Volts Maximum DC reverse current at rated DC blocking voltage IR 5.0 50.0 A CJ 15.0 F 50 /W TJ=25 TJ=125 Typical junction capacitance (Note 1) Maximum thermal resistance Operating and storage temperature range R JL TJ, TSTG -65 to +175 Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (2) Pulse test: Pulse width 300uSec, Duty cycle 2% 1 RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3