HD74LVC00 Quad. 2-input NAND Gates ADE-205-060B(Z) Rev.2 September 1995 Description The HD74LVC00 has four 2-input NAND gates in a 14 pin package. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) Function Table Inputs A B Output Y L L H L H H H L H H L H H: L: High level Low level HD74LVC00 Pin Arrangement 14 VCC 1A 1 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage VCC –0.5 to 6.0 V Input diode current I IK –50 mA Input voltage VI –0.5 to 6.0 V Output diode current I OK –50 mA VO = –0.5 V 50 mA VO = VCC+0.5 V Output voltage VO –0.5 to VCC+0.5 V Output current IO ±50 mA VCC, GND current / pin I CC or IGND 100 mA Storage temperature Tstg –65 to +150 °C Conditions VI = –0.5 V Note: The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. 2 HD74LVC00 Recommended Operating Conditions Item Symbol Ratings Unit Conditions Supply voltage VCC 1.5 to 5.5 V Data retention 2.0 to 5.5 V At operation VI 0 to 5.5 V A, B VO 0 to V CC V Y Operating temperature Ta –40 to 85 °C Output current I OH –12 mA VCC = 2.7 V mA VCC = 3.0 V to 5.5 V mA VCC = 2.7 V mA VCC = 3.0 V to 5.5 V Input / Output voltage –24* I OL 12 24* Input rise / fall time * 1 2 t r, t f 2 10 ns/V Notes: 1. This item guarantees maximum limit when one input switches. Waveform : Refer to test circuit of switching characteristics. 2. duty cycle ≤ 50%. Electrical Characteristics Ta = –40 to 85°C Item Symbol VCC (V) Min Max Unit Test Conditions Input voltage VIH 2.7 to 3.6 2.0 — V 4.5 to 5.5 VCC×0.7 — V 2.7 to 3.6 — 0.8 V 4.5 to 5.5 — VCC×0.3 V 2.7 to 5.5 VCC–0.2 — V I OH = –100 µA 2.7 2.2 — V I OH = –12 mA 3.0 2.4 — V 3.0 2.0 — V 4.5 3.8 — V 2.7 to 5.5 — 0.2 V I OL = 100 µA 2.7 — 0.4 V I OL = 12 mA 3.0 — 0.55 V I OL = 24 mA 4.5 — 0.55 V 0 to 5.5 — ±5.0 µA VIN = 5.5 V or GND 5.5 — 20 µA VIN = VCC or GND 3.0 to 3.6 — 500 µA VIN = one input at (VCC–0.6)V, other inputs at V CC or GND VIL Output voltage VOH VOL Input current I IN Quiescent supply current I CC ∆I CC I OH = –24 mA 3 HD74LVC00 Switching Characteristics Ta = –40 to 85°C Item Symbol VCC (V) Min Typ Max Unit From (Input) To (Output) Propagation delay time t PLH 2.7 — 4.5 7.0 ns A or B t PHL 3.3±0.3 1.5 3.5 6.0 ns 5.0±0.5 — 3.0 5.5 ns Input capacitance CIN 2.7 — 3.0 — pF Output capacitance CO 2.7 — 15.0 — pF 4 Y HD74LVC00 Test Circuit Input VCC VCC Pulse Generator Output Zout = 50 Ω 450 Ω CL = 50 pF Note: 1. 50 Ω Scope CL includes probe and jig capacitance. Waveforms tr Input tf 90 % A or B VIH 90 % Vref Vref 10 % 10 % t PHL GND t PLH VOH Output Y Vref Vref VOL TEST VIH Vref Notes: 1. 2. VCC = 2.7 V, 3.3±0.3 V VCC = 5.0±0.5 V 2.7 V VCC 1.5 V 50%VCC t r = 2.5 ns, tf = 2.5 ns Input waveform : PRR = 10 MHz, duty cycle 50% 5 Unit: mm 4.40 5.00 5.30 Max 14 8 1 7 0.65 0.20 ± 0.06 1.0 0.13 M 6.40 ± 0.20 0.10 *Dimension including the plating thickness Base material dimension *0.17 ± 0.05 0.15 ± 0.04 1.10 Max 0.83 Max 0.07 +0.03 –0.04 *0.22+0.08 –0.07 0° – 8° 0.50 ± 0.10 Hitachi Code JEDEC EIAJ Weight (reference value) TTP-14D — — 0.05 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.