AZ723 MINIATURE POWER RELAY FEATURES • • • • • • • • AC coils Dielectric strength 5000 Vrms Low cost Flux tight package 5 Amp switching - double pole contacts Isolation spacing greater than 8mm Molded materials: all 94V-0 UL and Canadian file E43203 CONTACTS GENERAL DATA Arrangement DPST (2 Form A) DPDT (2 Form C) Ratings Resistive load: Max. switched power: 150 W, 1250 VA Max. switched current: 5 A Max. switched voltage: 150 VDC/400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at rated load Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Inductive load: (cosØ =0.4) Max. switched power: 90W or 500VA Max. Switched current: 5A Max. switched voltage: 125VDC or 400 VAC Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 3000 Vrms between contact sets 1000 Vrms between open contacts Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Insulation Resistance 1000 megohms min. at 20°C, 500 VDC 50% RH Rated Load UL, CUR 5 A 250 VAC, resistive 5 A 30VDC resistive 1/ HP 240 VAC 3 Dropout Greater than 30% of nominal coil voltage Min. Load 5 VDC, .01A Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Material Silver alloy Vibration 0.062" DA at 10–55 Hz Resistance 30 milliohms initially (6V, 1A method) Shock 10 g Enclosure PC (94V-0) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 17 grams COIL Power At Pickup Voltage (typical) 576 mW Max. Continuous Dissipation 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient Temperature Rise 36°C (97°F) at nominal coil voltage Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 1998-10-28 AZ723 RELAY ORDERING DATA COIL SPECIFICATIONS - AC Coil Nominal Coil VAC 6 Must Operate VAC 4.8 ORDER NUMBER Max. Continuous VAC 7.8 Nominal Current mA ±10% 150.0 Coil Resistance ±10% 16 Form A (DPST) AZ723-2A-6A Form C (DPDT) AZ723-2C-6A 12 9.6 15.6 75.0 65 AZ723-2A-12A AZ723-2C-12A 24 19.2 31.2 37.5 260 AZ723-2A-24A AZ723-2C-24A 50 40.0 65.0 18.0 1130 AZ723-2A-50A AZ723-2C-50A 110 88.0 143.0 10.6 4600 AZ723-2A-110A AZ723-2C-110A 220 176.0 286.0 5.3 20200 AZ723-2A-220A AZ723-2C-220A 230 184.0 299.0 3.6 24900 AZ723-2A-230A AZ723-2C-230A MECHANICAL DATA .023 (0.58) x .023 (0.58) 0.016 (0.4) x 0.040 (1.015) .035 Dia. (0.9) 2 places (4 places Form A (6 places Form C) Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 1998-10-28