SGA-5289 SGA-5289Z Product Description Pb RoHS Compliant & Green Package DC-5000 MHz, Cascadable SiGe HBT MMIC Amplifier The SGA-5289 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring 1 micron emitters provides high F T and excellent thermal perfomance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Only 2 DC-blocking capacitors, a bias resistor and an optional RF choke are required for operation. The matte tin finish on Sirenza’s lead-free package utilizes a post annealing process to mitigate tin whisker formation and is RoHS Product Features compliant per EU Directive 2002/95. This package is also manu- • Now available in Lead Free, RoHS factured with green molding compounds that contain no antimony Compliant, & Green Packaging trioxide nor halogenated fire retardants. • High Gain : 12.7 dB at 1950 MHz • Cascadable 50 Ohm • Operates From Single Supply • Low Thermal Resistance Package i Gain & Return Loss vs. Frequency VD= 3.5 V, ID= 60 mA (Typ.) Gain (dB) 15 0 -10 GAIN ORL 10 -20 IRL 5 -30 0 Return Loss (dB) 20 Applications • • • • -40 0 1 2 3 4 Frequency (GHz) Symbol G 5 PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite 6 Parameter Small Signal Gain Units Frequency Min. Typ. Max. dB dB dB 850 MHz 1950 MHz 2400 MHz 12.1 13.4 12.7 12.5 14.7 P1dB Output Pow er at 1dB Compression dBm dBm 850 MHz 1950 MHz 15.8 14.4 OIP3 Output Third Order Intercept Point dBm dBm 850 MHz 1950 MHz 31.8 28.1 Bandw idth Determined by Return Loss (>10dB) IRL MHz 5000 Input Return Loss dB 1950 MHz 29.2 Output Return Loss dB 1950 MHz 18.1 NF Noise Figure dB 1950 MHz 3.8 VD Device Operating Voltage V 3.1 3.5 3.9 ID Device Operating Current mA 54 60 66 ORL RTH, j-l Thermal Resistance (junction to lead) Test Conditions: VS = 8 V RBIAS = 75 Ohms °C/W ID = 60 mA Typ. TL = 25ºC 97 OIP3 Tone Spacing = 1 MHz, Pout per tone = -5 dBm ZS = ZL = 50 Ohms The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2001 Sirenza Microdevices, Inc.. All worldwide rights reserved. 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 1 http://www.sirenza.com EDS-100616 Rev D SGA-5289 DC-5000 GHz Cascadable MMIC Amplifier Preliminary Typical RF Performance at Key Operating Frequencies Symbol G Parameter Frequency (MHz) Frequency Frequency (MHz)(MHz) 850 1950 Unit 100 500 2400 3500 dB 13.8 13.6 13.4 12.7 12.5 11.9 32.1 31.8 28.1 26.3 Small Signal Gain OIP3 Output Third Order Intercept Point dBm P1dB Output Power at 1dB Compression dBm 16.0 15.8 14.4 13.6 IRL Input Return Loss dB 26.8 24.8 25.1 29.2 21.1 14.6 ORL Output Return Loss dB 29.5 26.4 24.1 18.1 16.7 14.5 S12 Reverse Isolation dB 18.3 18.3 18.5 19.5 19.7 20.0 NF Noise Figure 4.3 4.2 3.8 5.0 dB VSS== 88 V V V Test TestConditions: Conditions: RBIAS = 75 Ohms R BIAS= 39 Ohms 60 mA mA Typ. Typ. IIDD == 80 25ºC TTLL == 25ºC OIP33 Tone Tone Spacing Spacing == 11 MHz, MHz, Pout Pout per per tone tone == 0-5dBm dBm OIP 50 Ohms Ohms ZZSS== ZZLL== 50 Absolute Maximum Ratings Noise Figure vs. Frequency VD=3.5 V, ID= 60 mA (Typ.) Noise Figure (dB) 7 6 TL=+25ºC 2 0.5 1 1.5 2 Frequency (GHz) 2.5 3 5V Max. RF Input Power +16 dBm +150°C Operating Temp. Range (TL) -40°C to +85°C Max. Storage Temp. +150°C Bias Conditions should also satisfy the following expression: IDVD < (TJ - TL) / RTH, j-l OIP3 vs. Frequency P1dB vs. Frequency VD= 3.5 V, ID= 60 mA (Typ.) VD= 3.5 V, ID= 60 mA (Typ.) 40 20 18 P1dB (dBm) 35 OIP3 (dBm) 120 mA Max. Device Voltage (VD) Operation of this device beyond any one of these limits may cause permanent damage. For reliable continous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. 3 0 Absolute Limit Max. Junction Temp. (TJ) 5 4 Parameter Max. Device Current (ID) 30 25 16 14 12 TL=+25ºC TL=+25ºC 20 10 0 0.5 1 1.5 2 Frequency (GHz) 303 Technology Court, Broomfield, CO 80021 2.5 3 0 Phone: (800) SMI-MMIC 2 0.5 1 1.5 2 Frequency (GHz) 2.5 3 http://www.sirenza.com EDS-100616 Rev. D SGA-5289 DC-5000 GHz Cascadable MMIC Amplifier Preliminary |S | vs. Frequency |S | vs. Frequency VD= 3.5 V, ID= 60 mA (Typ.) VD= 3.5 V, ID= 60 mA (Typ.) 21 20 11 0 -10 S11(dB) S21(dB) 15 10 5 0 0 1 2 3 4 Frequency (GHz) -30 +25°C -40°C +85°C TL 5 -20 -40 0 6 1 5 |S | vs. Frequency VD= 3.5 V, ID= 60 mA (Typ.) VD= 3.5 V, ID= 60 mA (Typ.) 6 22 0 -10 S22(dB) -15 S12(dB) 2 3 4 Frequency (GHz) |S | vs. Frequency 12 -12 +25°C -40°C +85°C TL -18 -20 -30 -21 +25°C -40°C +85°C TL -24 0 1 2 3 4 Frequency (GHz) 5 +25°C -40°C +85°C TL -40 0 6 1 2 3 4 Frequency (GHz) 5 6 NOTE: Full S-parameter data available at www.sirenza.com 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 3 http://www.sirenza.com EDS-100616 Rev. D SGA-5289 DC-5000 GHz Cascadable MMIC Amplifier Preliminary Basic Application Circuit Application Circuit Element Values R BIAS VS 1 uF Frequency (Mhz) 1000 pF Reference Designator 500 850 1950 2400 3500 CB 220 pF 100 pF 68 pF 56 pF 39 pF CD 100 pF 68 pF 22 pF 22 pF 15 pF LC 68 nH 33 nH 22 nH 18 nH 15 nH CD LC 4 1 SGA-5289 3 RF in RF out CB 2 CB Recommended Bias Resistor Values for ID=60mA RBIAS=( VS-VD ) / ID Supply Voltage(VS) RBIAS 6V 43 8V 75 10 V 110 12 V 150 Note: RBIAS provides DC bias stability over temperature. VS 1 uF RBIAS Mounting Instructions 1000 pF A52 CD LC 1. Solder the copper pad on the backside of the device package to the ground plane. 2. Use a large ground pad area with many plated through-holes as shown. 3. We recommend 1 or 2 ounce copper. Measurement for this data sheet were made on a 31 mil thick FR-4 board with 1 ounce copper on both sides. CB CB Part Identification Marking 3 1 1 2 Function 1 RF IN RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. Description 2, 4 GND Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as possible. 3 A52Z 2 A52 3 4 2 1 1 4 Pin # 2 3 3 Caution: ESD sensitive RF OUT/ RF output and bias pin. DC voltage is BIAS present on this pin, therefore a DC blocking capacitor is necessary for proper operation. Part Number Ordering Information Appropriate precautions in handling, packaging and testing devices must be observed. Part Number Reel Size Devices/Reel See Application Note AN-075 SGA-5289 13" 3000 for Package Outline Drawing SGA-5289Z 13" 3000 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 4 http://www.sirenza.com EDS-100616 Rev. D