IS6051 LOW INPUT CURRENT INFRA-RED EMITTING DIODE & LIGHT ACTIVATED SCR Dimensions in mm 2.54 APPROVALS l UL recognised, File No. E91231 7.0 6.0 7.62 max. DESCRIPTION The IS6051 is an optically coupled isolator consisting of infrared light emitting diode and a light activated silicon controlled rectifier in a standard 6pin dual in line plastic package. FEATURES l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. l High Isolation Voltage (5.3kVRMS ,7.5kVPK ) l High Surge Anode Current (5.0 A) l High Blocking Voltage (400V*1) l Low Turn on Current (5mA typical) l All electrical parameters 100% tested l Custom electrical selections available APPLICATIONS l 10A, T2L compatible, Solid State Relay l 25W Logic Indicator Lamp Driver l 400V Symmetrical transistor coupler SURFACE MOUNT 1.2 0.6 10.2 9.5 1.4 0.9 OPTION G 8.3 max 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 13/11/97 6 2 5 3 4 8.3 max. 5.1 max. 0.5 min. 3.9 3.1 0.48 15° Max 0.25 ABSOLUTE MAXIMUM RATINGS (25°C unless otherwise specified) Storage Temperature -55°C to + 150°C Operating Temperature -55°C to + 100°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUT DIODE Forward Current Forward Current (Peak) (1µs pulse, 300pps) Reverse Voltage Power Dissipation 60mA 3A 6V 100mW DETECTOR Peak Forward Voltage IS605 OPTION SM 1 Peak Reverse Gate Voltage RMS On-state Current Peak On-state Current (100µs, 1% duty cycle) Surge Current (10ms) Power Dissipation 400V*1 6V 300mA 10A 5A 300mW *1 IMPORTANT : A resistor must be connected between gate and cathode (pins 4 & 6) to prevent false firing (RGK < 56kΩ) ISOCOM INC 720 E., Park Boulevard, Suite 104, Plano, TX 75074 USA Tel: (972) 423-5521 Fax: (972) 422-4549 DB92611-AAS/A2 ELECTRICAL CHARACTERISTICS ( TA= 25°C Unless otherwise noted ) Input Output (note 2) PARAMETER MIN TYP MAX UNITS Forward Voltage (VF) Reverse Voltage (VR) 3 V V IF = 10mA IR = 10µA 400 V RGK= 10kΩ, ID= 2µA 400 V RGK= 10kΩ, ID= 2µA 1.3 V ITM = 300mA 2 µA RGK= 10kΩ, IF = 0, VDM= 400V 2 µA RGK= 10kΩ, IF = 0, Peak Off-state Voltage (VDM ) Peak Reverse Voltage (VRM ) 1.2 On-state Voltage (VTM ) 1.1 Off-state Current (IDM ) Reverse Current (IR ) 1.5 TEST CONDITION VDM= 400V Coupled Input Current to Trigger ( IFT ) (note 2) Turn on Time ( t on ) Coupled dv/dt, Input to Output (dv/dt) Input to Output Isolation Voltage VISO Input-output Isolation Resistance RISO Input-output Capacitance Cf Note 1 Note 2 13/11/97 3 mA VAK=100V, RGK=27kΩ 50 µs RGK=27kΩ, IF=30mΑ, VAK=20V, RL=200Ω 2 V/µs VRMS VPK Ω pF 500 5300 7500 1011 See note 1 See note 1 VIO = 500V (note 1) V = 0, f =1MHz Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. DB92611-AAS/A2