SN54AC241, SN74AC241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS513C – JUNE 1995 – REVISED SEPTEMBER 1996 D EPIC (Enhanced-Performance Implanted CMOS) 1-µm Process Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), Flat (W), and DIP (J, N) Packages SN54AC241 . . . J OR W PACKAGE SN74AC241 . . . DB, DW, N, OR PW PACKAGE (TOP VIEW) 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND description These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’AC241 are organized as two 4-bit buffers/drivers with separate complementary output-enable (1OE and 2OE) inputs. When 1OE is low or 2OE is high, the device passes noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs are in the high-impedance state. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 2Y4 1A1 1OE VCC SN54AC241 . . . FK PACKAGE (TOP VIEW) 1A2 2Y3 1A3 2Y2 1A4 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y1 2A4 1Y2 2A3 1Y3 2Y1 GND 2A1 1Y4 2A2 The SN54AC241 is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74AC241 is characterized for operation from –40°C to 85°C. 2OE D FUNCTION TABLES INPUTS 1OE 1A OUTPUT 1Y L H H L L L H X Z INPUTS 2OE 2A OUTPUT 2Y H H H H L L L X Z Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC is a trademark of Texas Instruments Incorporated. Copyright 1996, Texas Instruments Incorporated UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54AC241, SN74AC241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS513C – JUNE 1995 – REVISED SEPTEMBER 1996 logic symbol† 1OE 1A1 1A2 1A3 1A4 1 EN 2OE 2 18 4 16 6 14 8 12 1Y1 2A1 1Y2 2A2 1Y3 1Y4 2A3 2A4 19 EN 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. logic diagram (positive logic) 1OE 1A1 1A2 1A3 1A4 1 2OE 2 18 4 16 6 14 8 12 1Y1 2A1 1Y2 2A2 1Y3 2A3 1Y4 2A4 19 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA Maximum power dissipation at TA = 55°C (in still air) (see Note 2): DB package . . . . . . . . . . . . . . . . . . 0.6 W DW package . . . . . . . . . . . . . . . . . . 1.6 W N package . . . . . . . . . . . . . . . . . . . . 1.3 W PW package . . . . . . . . . . . . . . . . . . 0.7 W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils, except for the N package, which has a trace length of zero. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54AC241, SN74AC241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS513C – JUNE 1995 – REVISED SEPTEMBER 1996 recommended operating conditions (see Note 3) SN54AC241 VCC VIH Supply voltage VCC = 3 V VCC = 4.5 V High-level input voltage VCC = 5.5 V VCC = 3 V VIL VI VO IOH IOL ∆t/∆v Low-level input voltage MIN MAX 2 6 Low-level output current 2 6 3.15 3.15 3.85 0 High-level output current MAX 2.1 0 Output voltage MIN 2.1 VCC = 4.5 V VCC = 5.5 V Input voltage SN74AC241 3.85 0.9 0.9 1.35 1.35 1.65 1.65 VCC VCC 0 0 VCC VCC –12 –12 –24 –24 VCC = 5.5 V VCC = 3 V –24 –24 12 12 VCC = 4.5 V VCC = 5.5 V 24 24 24 24 TA Operating free-air temperature NOTE 3: Unused inputs must be held high or low to prevent them from floating. V V VCC = 3 V VCC = 4.5 V Input transition rise or fall rate UNIT V V V mA mA 0 8 0 8 ns/V –55 125 –40 85 °C PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54AC241, SN74AC241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS513C – JUNE 1995 – REVISED SEPTEMBER 1996 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = –50 µA IOH = –12 mA VOH IOL = –24 24 mA A IOH = –50 mA† IOH = –75 mA† IOL = 24 mA IOL = 50 mA† IOL = 75 mA† MAX SN74AC241 MIN 2.9 2.9 2.9 4.5 V 4.4 4.4 4.4 5.5 V 5.4 5.4 5.4 3V 2.56 2.4 2.46 4.5 V 3.86 3.7 3.76 5.5 V 4.86 4.7 4.76 V 3.85 0.1 0.1 0.1 4.5 V 0.1 0.1 0.1 5.5 V 0.1 0.1 0.1 3V 0.36 0.5 0.44 4.5 V 0.36 0.5 0.44 5.5 V 0.36 0.5 0.44 VO = VCC or GND, VI(OE) = VIL or VIH 5.5 V ICC Ci VI = VCC or GND, VI = VCC or GND V 1.65 5.5 V IOZ UNIT 3.85 5.5 V IO = 0 MAX 3V 55V 5.5 Control inputs MIN 3V VI = VCC or GND VI = VCC or GND II SN54AC241 5.5 V IOL = 12 mA Data inputs TA = 25°C TYP MAX 5.5 V IOL = 50 µA VOL MIN 1.65 ±0.1 ±1 ±1 ±0.1 ±1 ±1 ±0.25 ±5 ±2.5 µA 4 80 40 µA 5.5 V 5V 2.5 µA pF † Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms. switching characteristics over recommended operating VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y tPZH tPZL OE or OE Y tPHZ tPLZ OE or OE Y MIN TA = 25°C TYP MAX 1.5 6 9 1.5 6 9 1.5 6.5 1.5 7 2 1.5 POST OFFICE BOX 655303 temperature SN54AC241 MIN 1 12 1.5 10 1 11.5 1 10.5 12.5 1 13 1 13 12 1 13 1.5 13 8 12 1 13 2 12.5 7 12.5 1 13 1 13.5 • DALLAS, TEXAS 75265 MIN SN74AC241 MAX PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. 4 free-air MAX range, UNIT ns ns ns SN54AC241, SN74AC241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCAS513C – JUNE 1995 – REVISED SEPTEMBER 1996 switching characteristics over recommended operating VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y tPZH tPZL OE or OE Y tPHZ tPLZ OE or OE Y free-air MIN TA = 25°C TYP MAX 1.5 5 1.5 temperature SN54AC241 SN74AC241 MIN MAX MIN MAX 7 1 9.5 1 7.5 4.5 7 1 9 1 7.5 1.5 5.5 9 1 10 1 9.5 1.5 5.5 9 1 10 1 9.5 1.5 6.5 10 1 11.5 1 10.5 1.5 6 10 1 11.5 1 10.5 range, UNIT ns ns ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance per buffer/driver CL = 50 pF, f = 1 MHz TYP UNIT 45 pF PARAMETER MEASUREMENT INFORMATION 2 × VCC S1 500 Ω From Output Under Test CL = 50 pF (see Note A) Open 500 Ω Output Control (low-level enabling) LOAD CIRCUIT VCC Input 50% VCC 50% VCC 0V tPLH tPHL VOH Output 50% VCC 50% VCC VOL S1 Open 2 × VCC Open VCC 50% VCC 50% VCC 0V tPZL [ VCC tPLZ Output Waveform 1 S1 at 2 × VCC (see Note B) Output Waveform 2 S1 at Open (see Note B) TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH 50% VCC tPHZ tPZH VOLTAGE WAVEFORMS VOL + 0.3 V VOL 50% VCC VOH – 0.3 V VOH [0V VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns. D. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated