DSS 2x61-01A IFAV = 2x60 A VRRM = 100 V VF = 0.73 V Power Schottky Rectifier VRSM VRRM V V 100 100 miniBLOC, SOT-227 B Type DSS 2x61-01A Symbol Conditions Maximum Ratings IFRMS IFAVM IFAVM TC = 105°C; rectangular, d = 0.5 TC = 105°C; rectangular, d = 0.5; per device 100 60 120 A A A IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine 700 A EAS IAS = 12 A; L = 180 µH; TVJ = 25°C; non repetitive 16 mJ IAR VA =1.5 • VRRM typ.; f=10 kHz; repetitive 1.2 A 5000 (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25°C VISOL 50/60 Hz, RMS IISOL £ 1 mA Md mounting torque (M4) terminal connection torque (M4) Weight typical Symbol Conditions IR VF -40...+150 150 -40...+150 °C °C °C 150 W 2500 V~ 1.1-1.5/9-13 1.1-1.5/9-13 30 Nm/lb.in. Nm/lb.in. g Characteristic Values typ. max. TVJ = 25°C VR = VRRM TVJ = 125°C VR = VRRM IF = 60 A; IF = 60 A; IF = 120 A; V/ms 2 20 TVJ = 125°C TVJ = 25°C TVJ = 125°C RthJC RthCH 0.1 mA mA 0.73 0.86 0.93 V V V 0.8 K/W K/W Features • International standard package miniBLOC • Isolation voltage 2500 V~ • UL registered E 72873 • 2 independent Schottky diodes in 1 package • Very low VF • Extremely low switching losses • Low IRM-values Applications • Rectifiers in switch mode power supplies (SMPS) • Free wheeling diode in low voltage converters Advantages • High reliability circuit operation • Low voltage peaks for reduced protection circuits • Low noise switching • Low losses Dimensions see outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. © 2000 IXYS All rights reserved 824 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified 1-2 DSS 2x61-01A 100 10000 10 mA TVJ=150°C A IR IF pF CT 1 125°C 100°C 10 1000 0.1 75°C TVJ = 150°C 125°C 25°C 0.01 50°C 25°C TVJ= 25°C 1 0.0 100 0.001 0.2 0.4 0.8 V 1.0 0.6 0 20 40 Fig. 1 Maximum forward voltage drop characteristics Fig. 2 Typ. value of reverse current IR versus reverse voltage VR 90 120 A 0 80 V 100 VR 60 VF 20 40 60 80 V 100 VR Fig. 3 Typ. junction capacitance CT versus reverse voltage VR 10000 W 100 70 P(AV) IF(AV) A IFSM 80 50 DC d=0.5 60 d= DC 0.5 0.33 0.25 0.17 0.08 30 40 20 10 0 1000 0 0 40 80 120 °C 160 0 20 40 TC Fig. 4 Average forward current IF(AV) versus case temperature TC 60 IF(AV) 80 100A 100 10 100 1000 µs 10000 tP Fig. 5 Forward power loss characteristics 1 D=0.5 K/W ZthJC 0.33 0.25 0.17 0.08 0.1 Single Pulse (Thermal Resistance) DSS 2x61-01A 0.01 0.001 0.01 0.1 1 s 10 t Note: All curves are per diode 824 Fig. 6 Transient thermal impedance junction to case at various duty cycles © 2000 IXYS All rights reserved 2-2