VCC 105 ITRMS = 2x180A ITAVM = 2x105A VRRM = 800-1800 V Thyristor Modules ECO-PAC 2 Preliminary Data VRSM VDSM V VRRM VDRM V Typ 900 1300 1500 1700 1900 800 1200 1400 1600 1800 VCC VCC VCC VCC VCC Symbol 105 105 105 105 105 - 08io7 12io7 14io7 16io7 18io7 Conditions Maximum Ratings ITRMS 180 A 105 A ITAVM TC = 85°C; 180° sine ITSM TVJ = 45°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2250 2400 A A TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2000 2150 A A TVJ = 45°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 25300 23900 A2s A2s TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 20000 19100 A 2s A 2s 150 A/µs 500 A/µs I2dt (di/dt)cr TVJ = 125°C; repetitive, IT = 250 A f = 50 Hz; tP = 200 µs; VD = 2/3VDRM; IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/µs; (dv/dt)cr TVJ = 125°C; VDR = 2/3VDRM RGK = ∞, method 1 (linear voltage rise) 1000 V/µs PGM TVJ = 125°C; IT = ITAVM; ≤ 10 ≤ 5 W W PGAVM 0.5 W VRGM 10 V TVJ TVJM Tstg -40 ... + 125 125 -40 ... + 125 °C °C °C 3000 3600 V~ V~ 1.5 - 2.0 14 - 18 Nm lb.in. 26 g tP = 30 ms tP = 300 ms VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M4) Weight typ. Features • • • • Isolation voltage 3600 V~ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • DC motor control Light and temperature control Softstart AC motor controller Solid state switches Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling • High power density • Small and light weight IXYS reserves the right to change limits, test conditions and dimensions. © 2001 IXYS All rights reserved 135 Data according to IEC 60747 refer to a single thyristor unless otherwise stated 1-2 VCC 105 Component Symbol Conditions Characteristic Values min. typ. max. ID, IR TVJ = 125°C; VR = VRRM; VD = VDRM VT 5 mA IT = 300 A; TVJ = 25°C 1.5 V VTO rT For power-loss calculations only 0.8 V 2.4 mΩ VGT VD = 6 V; TVJ = 25°C TVJ = -40°C 1.5 1.6 V V IGT VD = 6 V; TVJ = 25°C TVJ = -40°C 150 200 mA mA VGD IGD TVJ = 125°C; TVJ = 125°C; VD = 2/3VDRM VD = 2/3VDRM 0.2 10 V mA IL TVJ = 25°C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/µs 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA tgd TVJ = 25°C; VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs 2 µs RthJC per Thyristor; DC per module per Thyristor; DC per module RthCH dS dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 0,2 0,1 0.26 K/W 0.13 K/W K/W K/W 11.2 mm 5.0 mm 50 m/s2 Dimensions in mm (1 mm = 0.0394") © 2001 IXYS All rights reserved 2-2