ECO-PACTM 1 Single Phase AC Controller Modules PSW1C100 ITRMS VRRM = 96 A = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Symbol I TRMS ITAVM ITAVM ITSM ∫ i2 dt (di/dt)cr Type PSW1C PSW1C PSW1C PSW1C PSW1C IJ 100/06 100/08 100/12 100/14 100/16 H G EF AB Test Conditions Maximum Ratings TVJ = TVJM TC = 75 °C; MN 180° sine 96 A 63 A 180° sine 53 A t = 10 ms (50 Hz), sine 1200 A VR = 0 t = 8.3 ms (60 Hz), sine 1300 A TVJ = 125 °C t = 10 ms (50 Hz), sine 1100 A VR = 0 t = 8.3 ms (60 Hz), sine 1200 A TVJ = 45 °C t = 10 ms (50 Hz), sine 7200 A²s VR = 0 t = 8.3 ms (60 Hz), sine 7000 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 6050 A²s Applications VR = 0 5970 A²s 150 A/µs • t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 150 A IG=0.45 A non repetitive,IT = ITAVM 500 A/µs 1000 V/µs diG/dt=0.45A/µs TVJ = 125 °C VD=2/3VDRM RGK= ∞, method 1 (linear voltage rise) PGAVM VRGM TVJ TVJM Tstg VISOL Thyristor controller for AC (circuit W1C acc. to IEC) for mains frequency Isolation voltage 3000 V∼ TVJ = 45 °C VD=2/3VDRM PGM • TC = 85 °C; f=50Hz, tP=200µs (dv/dt)cr Features TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W 0.5 W 10 V -40... + 125 125 °C °C -40... + 125 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 18 Nm lb.in. g tP=300µs t=1s Md Mounting torque (M4) Weight typ. • • • • • • • • Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Switching and control of single and three phase AC circuits Light and temperature control Softstart AC motor controller Solid state switches Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Symbol Test Conditions Characteristic Value ID,IR VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ IT = 200 A, ≤ 1.55 V 0.85 V 4.0 mΩ TVJ = 25 °C For power-loss calculations only VD=6V 5 mA TVJ= 25°C ≤ 1.5 V TVJ=-40°C ≤ 1.6 V IGT VD=6V TVJ= 25°C ≤ 100 mA TVJ=-40°C ≤ 200 mA VGD IGD IL TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA TVJ= 25°C, tP=10µs, VD=6V ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs TVJ= TVJM; IT=120A; tp=200µs;-di/dt=10A/µs typ. 150 µs IG=0.45A, diG/dt=0.45A/µs IH tgd IG=0.45A, diG/dt=0.45A/µs tq VR=100V; dv/dt=20V/µs; VD=2/3VDRM RthJC RthJK ds dA a per thyristor; DC per module per thyristor; sine 180° el per module Creeping distance on surface Creeping distance in air Max. allowable acceleration typ. 0.53 0.27 0.73 K/W K/W K/W typ. 0.37 K/W 6.6 9.7 50 mm mm m/s² Package style and outline Dimensions in mm (1mm = 0.0394“) 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20