VUC 36 IdAVM = 39 A ITAVM = 31 A VRRM = 1200-1600 V Three Phase Rectifier Bridge with Fast Diodes and "Softstart" Thyristor VRSM VRRM VDSM VDRM V V 1300 1500 1700 1200 1400 1600 4 Type 1 2 VUC 36-12go2 VUC 36-14go2 VUC 36-16go2 1 6 7 3 4 2 5 6 7 8 3 5 8 Symbol Test Conditions Maximum Ratings Diode Thyristor Features Package with DCB ceramic base plate Isolation voltage 3600 V~ Planar passivated chips Fast recovery diodes to reduce EMI Separate thyristor for softstart Solderable terminals UL registered E 72873 ● ● IdAV IdAVM ITAVM TK = 85°C; module module TK = 85°C; (DC) IFSM, ITSM TVJ = 45°C; VR = 0 I2t 34 39 - 31 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 300 330 400 440 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 270 300 360 400 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 450 460 800 810 A2s A2s 650 670 2 TVJ = TVJM VR = 0 (di/dt)cr (dv/dt)cr t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 365 380 TVJ = TVJM repetitive, IT = 50 A f =400 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.3 A, non repetitive, IT = ITAVM diG/dt = 0.3 A/ms 150 ● ● ● Applications Input rectifier for switching power supplies (SMPS) Softstart capacitor charging Electric drives and auxiliaries ● ● ● Advantages Easy to mount with two screws Space and weight savings Improved temperature and power cycling Up to 10 dB lower EMI/RFI compared to standard rectifier tp = 30 ms tp = 10 ms 500 A/ms 200 V/ms 10 V VISOL 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s Md Mounting torque (M5) (10-32 UNF) Weight typ. ● 10 1 0.5 W W W -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ 2-2.5 18-22 28 Nm lb.in. g ● Dimensions in mm (1 mm = 0.0394") £ £ PGAVM TVJ TVJM Tstg A/ms ● TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM ● ● VRGM PGM As A2s ● Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 1-2 VUC 36 Symbol Test Conditions IR, ID VR = VRRM; VD = VDRM VF, VT IF = 55 A; IT = 45 A, TVJ = 25°C VT0 rT For power-loss calculations only (TVJ = 125°C) VGT IGT VD = 6 V; VD = 6 V; TVJ = 25°C TVJ = 25°C £ £ 1.5 80 V mA VGD IGD TVJ = TVJM; TVJ = TVJM; VD = 2/3 VDRM VD = 2/3 VDRM £ £ 0.2 5 V mA IL TVJ = 25°C; tG = 30 ms IG = 0.3 A; diG/dt = 0.3 A/ms £ 300 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ £ 100 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/ms £ 2.5 ms tq TVJ = 125°C; IT = 15 A, tp = 300 ms, -di/dt = 10 A/ms VR = 100 V, dv/dt = 20 V/ms, VD = 2/3 VDRM typ. 130 ms trr TVJ = 25°C; IF = 10 A; -di/dt = 10 A/ms, VR = 1/2 VRRM £ 1.5 - ms RthJC per thyristor (diode); DC current per module per thyristor (diode); DC current per module 1.4 0.233 2.0 0.333 0.9 1.1 - K/W K/W K/W K/W RthJH dS dA a Characteristic Values Diode Thyristor TVJ = TVJM TVJ = 25°C Creeping distance on surface Creepage distance in air Max. allowable acceleration © 2000 IXYS All rights reserved £ 5 £ 0.3 £ £ 5 0.3 mA mA £ 1.85 £ 1.4 V 1.2 16 0.85 V 10 mW 7 mm 7 mm 50 m/s2 2-2