VYK 70 IFAV = 3x 28 A VRRM = 800-1600 V Three Thyristor Module Preliminary data VRSM VDSM VRRM VDRM V V 800 1200 1400 1600 800 1200 1400 1600 A Type 2 3 1 C D E VYK 70-08io7 VYK 70-12io7 VYK 70-14io7 VYK 70-16io7 Symbol Test Conditions Maximum Ratings IFAVM IFRMS TC = 85°C, 50 - 400 Hz (per phase) TC = 85°C, 50 - 400 Hz (per phase) ITSM TVJ = 45°C; VR = 0 28 43 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 550 600 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 550 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1520 1520 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1250 1250 A2s A2s TVJ = TVJM repetitive, IT = 25 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms 150 A/ms 500 A/ms Features Package with metal base plate Isolation voltage 3000 V~ Planar passivated chips UL applied • ¼" fast-on power terminals ● ● ● òi2dt ● Applications ● ● ● ● (di/dt)cr Advantages ● ● (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 tp = 30 ms tp = 300 ms V/ms PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 2500 3000 V~ V~ VISOL 50/60 Hz, RMS IISOL £ 1 mA Md Mounting torque (M5) (10-32 UNF) Weight typ. t = 1 min t=1s 5±15 % 44±15 % 110 Switching and control of three phase AC circuits Softstart AC motor controller Solid state switches Light and temperature control ● Easy to mount with two screws Space and weight savings Improved temperature and power cycling Nm lb.in. g Data according to IEC 60747 refer to a single diode/thyristor unless otherwise stated IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 1-2 VYK 70 Symbol Test Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM £ 5 VT IT £ 1.45 V VT0 rT For power-loss calculations only (TVJ = 125°C) 0.85 11 V mW VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL = 45 A; TVJ = 25°C mA TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C £ £ £ £ 1.5 1.6 100 200 V V mA mA VD = 2/3 VDRM £ £ 0.2 5 V mA TVJ = 25°C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/ms £ 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ £ 200 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms £ 2 ms tq TVJ = TVJM; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM typ. 150 ms RthJC per thyristor; sine 180°el per module per thyristor; sine 180°el per module RthJH dS dA a Creeping distance on surface Creepage distance in air Max. allowable acceleration 0.9 0.15 1.1 0.183 K/W K/W K/W K/W 16.1 6.0 50 mm mm m/s2 Dimensions in mm (1 mm = 0.0394") © 2000 IXYS All rights reserved 2-2