TI SN75C189ADBLE

SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
D
D
D
D
D
D
D
D
Meet or Exceed the Requirements of
TIA/EIA-232-F and ITU Recommendation
V.28
Low Supply Current . . . 420 µA Typ
Preset On-Chip Input Noise Filter
Built-in Input Hysteresis
Response and Threshold Control Inputs
Push-Pull Outputs
Functionally Interchangeable and
Pin-to-Pin Compatible With
Texas Instruments SN75189/SN75189A and
Motorola MC1489/MC1489A
Package Options Include Plastic
Small-Outline (D) and Shrink Small-Outline
(DB) Packages, and Standard Plastic (N)
DIP
D, DB, OR N PACKAGE
(TOP VIEW)
1A
1 CONT
1Y
2A
2 CONT
2Y
GND
1
14
2
13
3
12
4
11
5
10
6
9
7
8
VCC
4A
4 CONT
4Y
3A
3 CONT
3Y
description
The SN75C189 and SN75C189A are low-power, bipolar, quadruple line receivers that are used to interface data
terminal equipment (DTE) with data circuit-terminating equipment (DCE). These devices have been designed
to conform to TIA/EIA-232-F.
The SN75C189 has a 0.33-V typical hysteresis, compared with 0.97 V for the SN75C189A. Each receiver has
provision for adjustment of the overall input threshold levels. This is achieved by choosing external series
resistors and voltages to provide bias levels for the response-control pins. The output is in the high logic state
if the input is open circuit or shorted to ground.
These devices have an on-chip filter that rejects input pulses of less than 1-µs duration. An external capacitor
can be connected from the control pins to ground to provide further input noise filtering for each receiver.
The SN75C189 and SN75C189A have been designed using low-power techniques in a bipolar technology. In
most applications, these receivers interface to single inputs of peripheral devices such as UARTs, ACEs, or
microprocessors. By using sampling, such peripheral devices usually are insensitive to the transition times of
the input signals. If this is not the case, or for other uses, it is recommended that the SN75C189 and SN75C189A
outputs be buffered by single Schmitt input gates or single gates of the HCMOS, ALS, or 74F logic families.
The SN75C189 and SN75C189A are characterized for operation from 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
logic symbol†
1A
1 CONT
2A
2 CONT
3A
3 CONT
4A
4 CONT
logic diagram (each receiver)
1
A
2
Response
Control
3
THRESHOLD
ADJUST
4
5
6
10
8
9
1Y
Y
2Y
3Y
13
11
12
4Y
† This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
schematic of inputs and outputs
EQUIVALENT OF EACH INPUT‡
EQUIVALENT OF EACH OUTPUT
VCC
Input
ESD
Protection
3.4 kΩ
ESD
Protection
Response
Control
Output
1.5 kΩ
530 Ω
‡ All resistor values shown are nominal.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)§
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30 V to 30 V
Output voltage range, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to VCC+ 0.3 V
Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
§ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltages are with respect to network GND.
2. The package thermal impedance is calculated in accordance with JESD 51.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
recommended operating conditions
MIN
NOM
MAX
VCC
VI
Supply voltage
4.5
5
6
Input voltage (see Note 3)
–25
IOH
IOL
High-level output current
–3.2
mA
Low-level output current
3.2
mA
Response-control current
±1
mA
25
UNIT
V
V
TA
Operating free-air temperature
0
70
°C
NOTE 3: The algebraic convention, where the more positive (less negative) limit is designated as maximum, is used in this data sheet for logic
levels only, e.g., if –10 V is a maximum, the typical value is a more negative voltage.
electrical characteristics over recommended free-air temperature range, VCC = 5 V ±10% (unless
otherwise noted) (see Note 4)
PARAMETER
VIT
IT+
Positive going input threshold voltage
Positive-going
VIT
IT–
Negative going input threshold voltage
Negative-going
Vh
hys
Input hysteresis voltage (VIT
IT+ – VIT
IT–)
VOH
TEST CONDITIONS
’C189
’C189A
’C189
’C189A
’C189
’C189A
High level output voltage
High-level
See Figure 1
MIN
TYP†
1
1.5
1.6
2.25
0.75
See Figure 1
See Figure 1
MAX
1.25
0.75
1
0.15
0.33
0.65
0.97
VCC = 4.5 V to 6 V,,
IOH = –20 µA
VI = 0.75 V,,
35
3.5
VCC = 4.5 V to 6 V,
IOH = –3.2 mA
VI = 0.75 V,
2.5
VI = 3 V,,
1.25
UNIT
V
V
V
V
VOL
Low level output voltage
Low-level
VCC = 4.5 V to 6 V,,
IOL = 3.2 mA
IIH
High level input current
High-level
See Figure 2
VI = 25 V
VI = 3 V
3.6
8.3
0.43
1
IIL
Low level input current
Low-level
See Figure 2
VI = –25 V
VI = –3 V
–3.6
–8.3
–0.43
–1
IOS
Short-circuit output current
See Figure 3
ICC
Supply current
VI = 5 V,
See Figure 2
04
0.4
No load,
V
mA
mA
–35
mA
420
700
µA
TYP
MAX
UNIT
† All typical values are at TA = 25°C.
NOTE 4: All characteristics are measured with response-control terminal open.
switching characteristics, VCC = 5 V ±10%, TA = 25°C
PARAMETER
tPLH
tPHL
tTLH
tTHL
TEST CONDITIONS
MIN
Propagation delay time, low- to high-level output
6
µs
Propagation delay time, high- to low-level output
Transition time, low- to high-level output‡
6
µs
500
ns
300
ns
RL = 5 kΩ,
CL = 50 pF,
Transition time, high- to low-level output‡
See Figure 4
tw(N)
Duration of longest pulse rejected as noise§
1
6
µs
‡ Measured between 10% and 90% points of output waveform
§ The receiver ignores any positive- or negative-going pulse that is less than the minimum value of tw(N) and accepts any postive- or negative-going
pulse greater than the maximum of tw(N).
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
PARAMETER MEASUREMENT INFORMATION
VCC
ÎÎÎ
ÎÎ ÎÎÎ
ÎÎ
VIT, V1
VOH
Response
Control
Open Unless
Otherwise Specified
VOL
IOL
RC
RC
CC
VC
–VC
NOTE A: Arrows indicate actual direction of current flow. Current into a terminal is a positive value.
Figure 1. VT+, VIT–, VOH, VOL
VCC
VI
ICC
IIH
Open
–IIL
Response Control
Open
NOTE A: Arrows indicate actual direction of current flow. Current into a terminal is a positive value.
Figure 2. IIH, IIL, ICC
VCC
–IOS
Response Control
Open
NOTE A: Arrows indicate actual direction of current flow. Current into a terminal is a positive value.
Figure 3. IOS
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
–IOH
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
PARAMETER MEASUREMENT INFORMATION
VCC
Pulse
Generator
(see Note B)
Output
RL = 5 kΩ
Response Control
Open
CL = 50 pF
(see Note A)
TEST CIRCUIT
3V
1.5 V
Input
1.5 V
0V
tPLH
tPHL
90%
Output
90%
1.5 V
10%
1.5 V
10%
tTHL
VOH
VOL
tTLH
VOLTAGE WAVEFORMS
NOTES: A. CL includes probe and jig capacitances.
B. The pulse generator has the following characteristics: ZO = 50 Ω, tw = 25 µs.
Figure 4. Test Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
TYPICAL CHARACTERISTICS
SN75C189
INPUT THRESHOLD VOLTAGE (POSITIVE GOING)
vs
FREE-AIR TEMPERATURE
SN75C189A
INPUT THRESHOLD VOLTAGE (POSITIVE GOING)
vs
FREE-AIR TEMPERATURE
2.4
1.5
VCC = 5.5 V
V IT+ – Input Threshold Voltage – V
V IT+ – Input Threshold Voltage – V
VCC = 5.5 V
1.4
1.3
1.2
2.2
2
1.8
1.6
1.4
1.2
1.1
0
20
40
60
80
0
100
20
Figure 5
80
100
SN75C189A
INPUT THRESHOLD VOLTAGE (NEGATIVE GOING)
vs
FREE-AIR TEMPERATURE
1.2
1.15
VCC = 5.5 V
VCC = 5.5 V
V IT– – Input Threshold Voltage – V
V IT– – Input Threshold Voltage – V
60
Figure 6
SN75C189
INPUT THRESHOLD VOLTAGE (NEGATIVE GOING)
vs
FREE-AIR TEMPERATURE
1.1
1
0.9
1.1
1.05
1
0.95
0.9
0.85
0.8
0
20
40
60
80
100
0
TA – Free-Air Temperature – °C
20
40
Figure 8
POST OFFICE BOX 655303
60
80
TA – Free-Air Temperature – °C
Figure 7
6
40
TA – Free-Air Temperature – °C
TA – Free-Air Temperature – °C
• DALLAS, TEXAS 75265
100
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
TYPICAL CHARACTERISTICS
SN75C189A
INPUT HYSTERESIS
vs
FREE-AIR TEMPERATURE
SN75C189
INPUT HYSTERESIS
vs
FREE-AIR TEMPERATURE
1.2
0.40
0.38
1.1
0.36
Vhys – Input Hysteresis – V
Vhys – Input Hysteresis – V
VCC = 5 V
VCC = 5 V
0.34
0.32
0.30
0.28
0.26
1
0.9
0.8
0.7
0.6
0.24
0.5
0.22
0.20
0.4
0
20
40
60
80
100
120
0
20
TA – Free-Air Temperature – °C
VOL – Low-Level Output Voltage – V
VOH – High-Level Output Voltage – V
3.8
VCC = 4.5 V
IOH = –3.2 mA
VI = 0.75 V
3.4
3.2
3
2.8
2.6
2.4
2.2
40
100
LOW-LEVEL OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
3.8
20
80
Figure 10
HIGH-LEVEL OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
0
60
TA – Free-Air Temperature – °C
Figure 9
3.6
40
60
80
100
VCC = 4.5 V
IOH = –3.2 mA
VI = 3 V
3.6
3.4
3.2
3
2.8
2.6
2.4
2.2
0
TA – Free-Air Temperature – °C
20
40
60
80
100
TA – Free-Air Temperature – °C
Figure 11
Figure 12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
TYPICAL CHARACTERISTICS
SN75C189
HIGH-LEVEL INPUT CURRENT
vs
FREE-AIR TEMPERATURE
SN75C189A
HIGH-LEVEL INPUT CURRENT
vs
FREE-AIR TEMPERATURE
0.65
VCC = 4.5 V
VI = 3 V
I IH – High-Level Input Current – mA
I IH – High-Level Input Current – mA
0.7
0.65
0.6
0.55
0.5
0.45
VCC = 4.5 V
VI = 3 V
0.6
0.55
0.5
0.45
0.4
0.35
0.4
0
20
40
60
80
100
0
20
TA – Free-Air Temperature – °C
80
100
Figure 14
SN75C189
LOW-LEVEL INPUT CURRENT
vs
FREE-AIR TEMPERATURE
SN75C189A
LOW-LEVEL INPUT CURRENT
vs
FREE-AIR TEMPERATURE
–0.2
–0.2
VCC = 4.5 V
VI = 3 V
I IL – Low-Level Input Current – mA
VCC = 4.5 V
VI = 3 V
I IL – Low-Level Input Current – mA
60
TA – Free-Air Temperature – °C
Figure 13
–0.3
–0.4
–0.5
–0.6
–0.7
–0.3
–0.4
–0.5
–0.6
–0.7
–0.8
–0.8
0
20
40
60
80
100
0
20
40
Figure 15
Figure 16
POST OFFICE BOX 655303
60
80
TA – Free-Air Temperature – °C
TA – Free-Air Temperature – °C
8
40
• DALLAS, TEXAS 75265
100
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
HIGH-LEVEL SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
0
VCC = 5.5 V
VO = 0
–2
–4
–6
–8
–10
–12
–14
–16
0
20
40
60
80
100
I OS(L) – Low-Level Short-Circuit Output Current – mA
IOS(H) – High-Level Short-Circuit Output Current – mA
TYPICAL CHARACTERISTICS
LOW-LEVEL SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
30
VCC = 5.5 V
VI = 0
25
20
15
10
5
0
0
20
TA – Free-Air Temperature – °C
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
800
VCC = 5.5 V
VI = 5 V
I CC – Supply Current – µA
600
500
400
300
200
100
0
0
20
40
60
80
100
Figure 18
60
80
100
TA – Free-Air Temperature – °C
t PLH – Propagation Delay Time, Low-to-High Level Output – µ s
Figure 17
700
40
TA – Free-Air Temperature – °C
PROPAGATION DELAY TIME,
LOW- TO HIGH-LEVEL OUTPUT
vs
FREE-AIR TEMPERATURE
5
VCC = 4.5 V
CL = 50 pF
4.5
4
3.5
3
2.5
2
0
Figure 19
20
40
60
80
100
TA – Free-Air Temperature – °C
Figure 20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
SN75C189, SN75C189A
QUADRUPLE LOW-POWER LINE RECEIVERS
SLLS041G – OCTOBER 1988 – REVISED JANUARY 2000
PROPAGATION DELAY TIME,
HIGH- TO LOW-LEVEL OUTPUT
vs
FREE-AIR TEMPERATURE
t TLH – Transition Time, Low-to-High Level Output – µ s
t PHL – Propagation Delay Time, High-to-Low Level Output – µ s
TYPICAL CHARACTERISTICS
4
VCC = 4.5 V
CL = 50 pF
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
0
20
40
60
80
100
TA – Free-Air Temperature – °C
TRANSITION TIME,
LOW- TO HIGH-LEVEL OUTPUT
vs
FREE-AIR TEMPERATURE
400
VCC = 4.5 V
CL = 50 pF
350
300
250
200
150
100
0
20
t THL – Transition Time, High-to-Low Level Output – µ s
Figure 22
TRANSITION TIME,
HIGH- TO LOW-LEVEL OUTPUT
vs
FREE-AIR TEMPERATURE
200
VCC = 4.5 V
CL = 50 pF
180
160
140
120
100
80
60
40
0
20
40
60
80
TA – Free-Air Temperature – °C
Figure 23
POST OFFICE BOX 655303
60
80
TA – Free-Air Temperature – °C
Figure 21
10
40
• DALLAS, TEXAS 75265
100
100
PACKAGE OPTION ADDENDUM
www.ti.com
24-Oct-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
SN75C189AD
ACTIVE
SOIC
D
14
SN75C189ADBLE
OBSOLETE
SSOP
DB
14
SN75C189ADBR
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ADBRE4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ADE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ADG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ADR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ADRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ADRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189AN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN75C189ANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN75C189ANSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189ANSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN75C189NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN75C189NSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN75C189NSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
50
Green (RoHS &
no Sb/Br)
TBD
Lead/Ball Finish
CU NIPDAU
Call TI
MSL Peak Temp (3)
Level-1-260C-UNLIM
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
24-Oct-2006
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2006, Texas Instruments Incorporated