3.2X1.6mm SMD CHIP LED LAMP APK3216VGC GREEN Features Description !3.2mmX1.6mm SMT LED, 1.1mm THICKNESS. The Green source color devices are made with !LOW POWER CONSUMPTION. InGaN on SiC Light Emitting Diode. !WIDE VIEWING ANGLE. ! IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE :2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAD1152 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APK3216VGC Iv (m c d ) @ 20 m A L en s Ty p e GREEN (InGaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 70 22 0 90 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 520 nm IF = 2 0 m A Green 525 nm IF = 2 0 m A Spectral Line Half-width Green 38 nm IF = 2 0 m A C Capacitance Green 45 pF V F = 0 V; f = 1 M Hz VF Forward Voltage Green 4.0 4.5 V IF = 2 0 m A IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Par am et er Gr een Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAD1152 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 2 OF 4 Green APK3216VGC SPEC NO:DSAD1152 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 3 OF 4 APK3216VGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO:DSAD1152 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 4 OF 4