2.0x1.25mm SMD CHIP LED LAMP APTC2012CGCK GREEN Features Description !2.0mmx1.25mm SMT LED,0.75mm THICKNESS. The Green source color devices are made with !LOW InGaAlP on GaAs substrate Light Emitting Diode. POWER CONSUMPTION. ! WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0960 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide Par t No . Dic e APTC2012CGCK Iv (m c d ) @ 20 m A L en s Ty p e GREEN(InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 15 40 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 574 nm IF = 2 0 m A Green 570 nm IF = 2 0 m A Spectral Line Half-width Green 20 nm IF = 2 0 m A C Capacitance Green 15 pF V F = 0 V; f = 1 M Hz VF Forward Voltage Green 2.1 2.5 V IF = 2 0 m A IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r Gr een Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0960 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 2 OF 4 Green APTC2012CGCK SPEC NO: DSAD0960 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 3 OF 4 APTC2012CGCK SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD0960 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 4 OF 4