3.2x2.4mm SMD CHIP LED LAMP APD3224CGCK GREEN Features Description !3.2x2.4mm SMT LED, 2.4mm THICKNESS. The Green source color devices are made with !LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 1500PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB0052 APPROVED : J. Lu REV NO: V.3 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN:D.L.HUANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e APD3224CGCK Iv (m c d ) @ 20 m A L en s Ty p e GREEN (InGaAlP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 18 0 55 0 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 574 nm I F =20mA Green 570 nm I F =20mA Spectral Line Half-width Green 20 nm I F =20mA C Capacitance Green 15 pF V F =0V;f =1MHz VF Forward Voltage Green 2.1 2.5 V I F =20mA IR Reverse Current Green 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r Gr een Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0052 APPROVED : J. Lu REV NO: V.3 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN:D.L.HUANG PAGE: 2 OF 4 Green APD3224CGCK SPEC NO: DSAB0052 APPROVED : J. Lu REV NO: V.3 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN:D.L.HUANG PAGE: 3 OF 4 APD3224CGCK SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB0052 APPROVED : J. Lu REV NO: V.3 CHECKED :Allen Liu DATE:MAR/22/2003 DRAWN:D.L.HUANG PAGE: 4 OF 4