TI SN74HC4851NE4

SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
D Injection-Current Cross Coupling <1mV/mA
D
D
D
D
D
D, DGV, N, OR PW PACKAGE
(TOP VIEW)
(see Figure 1)
Low Crosstalk Between Switches
Pin Compatible With SN74HC4051,
SN74LV4051A, and CD4051B
2-V to 6-V VCC Operation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
− 1000-V Charged-Device Model (C101)
Y4
Y6
COM
Y7
Y5
INH
NC
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
Y2
Y1
Y0
Y3
A
B
C
NC − No internal connection
description/ordering information
This eight-channel CMOS analog multiplexer/demultiplexer is pin compatible with the ’4051 function and,
additionally, features injection-current effect control, which has excellent value in automotive applications where
voltages in excess of normal supply voltages are common.
The injection-current effect control allows signals at disabled analog input channels to exceed the supply
voltage without affecting the signal of the enabled analog channel. This eliminates the need for external
diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
PACKAGE†
TA
PDIP − N
SOIC − D
−40°C to 125°C
TSSOP − PW
Tube
SN74HC4851N
Tube
SN74HC4851D
Tape and reel
SN74HC4851DR
Tube
SN74HC4851PW
Tape and reel
SN74HC4851PWR
TOP-SIDE
MARKING
HC4851N
HC4851
HC4851
TVSOP − DGV
Tape and reel
SN74HC4851DGVR
HC4851
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2004, Texas Instruments Incorporated
!"#$ % &'!!($ #% )'*+&#$ ,#$(!,'&$% &!" $ %)(&&#$% )(! $.( $(!"% (/#% %$!'"($%
%$#,#!, 0#!!#$1- !,'&$ )!&(%%2 ,(% $ (&(%%#!+1 &+',(
$(%$2 #++ )#!#"($(!%-
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
FUNCTION TABLE
INPUTS
A
ON
CHANNEL
L
L
Y0
L
H
Y1
H
L
Y2
L
H
H
Y3
H
L
L
Y4
H
L
H
Y5
H
H
L
Y6
L
H
H
H
Y7
H
X
X
X
None
INH
C
L
L
L
L
L
L
L
L
L
L
B
logic diagram (positive logic)
InjectionCurrent
Control
InjectionCurrent
Control
11
A
B
C
INH
2
10
9
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
COM
Y0
InjectionCurrent
Control
14
InjectionCurrent
Control
15
InjectionCurrent
Control
12
Y3
InjectionCurrent
Control
1
Y4
InjectionCurrent
Control
5
InjectionCurrent
Control
2
InjectionCurrent
Control
6
3
4
Y1
Y2
Y5
Y6
Y7
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Switch I/O voltage range, VIO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
I/O diode current, IIOK (VIO < 0 or VIO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
Switch through current, IT (VIO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W
DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 4)
MIN
VCC
VIH
Supply voltage
2
High-level input voltage,
control inputs
VCC = 2 V
VCC = 3 V
1.5
VCC = 3.3 V
VCC = 4.5 V
2.3
VCC = 6 V
VCC = 2 V
VIL
VI
VIO
Low-level input voltage,
control inputs
UNIT
V
2.1
V
3.15
4.2
0.5
0.9
VCC = 4.5 V
VCC = 6 V
1.35
1
V
1.8
Control input voltage
0
Input/output voltage
0
Input transition rise or fall time
6
VCC = 3 V
VCC = 3.3 V
VCC = 2 V
VCC = 3 V
∆t/∆v
MAX
VCC
VCC
V
V
1000
800
VCC = 3.3 V
VCC = 4.5 V
700
VCC = 6 V
400
ns
500
TA
Operating free-air temperature
−40
125
°C
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
ron
∆ron
II
IS(off)
IS(on)
ICC
CIC
On-state
switch resistance
Difference in
on-state resistance
between switches
Control input current
TEST CONDITIONS
IT ≤ 2 mA,
VI = VCC to GND,
VINH = VIL
(see Figure 5)
IT ≤ 2 mA,
VI = VCC/2,
VINH = VIL
Off-state switch
leakage current
(any one channel)
VI = VCC or GND
VI = VCC or GND,
VINH = VIH
(see Figure 6)
Off-state switch
leakage current
(common channel)
VI = VCC or GND,
VINH = VIH
(see Figure 7)
On-state switch
leakage current
VI = VCC or GND,
VINH = VIL
(see Figure 8)
Supply current
Control input capacitance
VI = VCC or GND
A, B, C, INH
VCC
MIN
TA = 25°C
TYP
MAX
UP TO 85°C
MIN
MAX
UP TO 125°C
MIN
MAX
2.V
500
650
670
700
3V
215
280
320
360
3.3 V
210
270
305
345
4.5 V
160
210
240
270
6V
150
195
220
250
2.V
4
10
15
20
3V
2
8
12
16
3.3 V
2
8
12
16
4.5 V
2
8
12
16
6V
3
9
13
18
±0.1
±0.1
±1
±0.1
±0.5
±1
6V
UNIT
Ω
Ω
µA
µA
A
6V
6V
±0.2
±2
±4
±0.1
±0.5
±1
µA
2
20
40
µA
3.5
10
10
10
pF
6V
CIS
Common
terminal capacitance
Switch off
22
40
40
40
pF
COS
Switch terminal capacitance
Switch off
6.7
15
15
15
pF
injection current coupling specifications, TA = −40°C to 125°C
PARAMETER
VCC
3.3 V
5V
3.3 V
V∆out
Maximum shift of output voltage of enabled analog
channel
TEST CONDITIONS
II‡ ≤ 1 mA
RS ≤ 3.9 kΩ
II‡ ≤ 10 mA
5V
3.3 V
5V
3.3 V
II‡ ≤ 1 mA
RS ≤ 20 kΩ
5V
† Typical values are measured at TA = 25°C.
‡ II = total current injected into all disabled channels
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
II‡ ≤ 10 mA
MIN
TYP†
MAX
0.05
1
0.1
1
0.345
5
0.067
5
0.05
2
0.11
2
0.05
20
0.024
20
UNIT
mV
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
switching characteristics over recommended operating free-air temperature range,
VCC = 2 V, CL = 50 pF (unless otherwise noted) (see Figures 9−14)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
MIN
TA = 25°C
TYP
MAX
UP TO 85°C
MIN
MAX
UP TO 125°C
MIN
MAX
UNIT
tPLH
tPHL
Propagation
delay time
COM or Yn
Yn or COM
19.5
25
29
32
ns
tPLH
tPHL
Propagation
delay time
Channel Select
COM or Yn
23
30
35
40
ns
tPZH
tPZL
Enable
delay time
INH
COM or Yn
95
105
115
ns
tPHZ
tPLZ
Disable
delay time
INH
COM or Yn
95
105
115
ns
switching characteristics over recommended operating free-air temperature range,
VCC = 3 V, CL = 50 pF (unless otherwise noted) (see Figures 9−14)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
MIN
TYP
MAX
UP TO 85°C
MIN
MAX
UP TO 125°C
MIN
MAX
UNIT
tPLH
tPHL
Propagation
delay time
COM or Yn
Yn or COM
12
15.5
17.5
19.5
ns
tPLH
tPHL
Propagation
delay time
Channel Select
COM or Yn
13.5
17.5
20
23
ns
tPZH
tPZL
Enable
delay time
INH
COM or Yn
90
100
110
ns
tPHZ
tPLZ
Disable
delay time
INH
COM or Yn
90
100
110
ns
switching characteristics over recommended operating free-air temperature range,
VCC = 3.3 V, CL = 50 pF (unless otherwise noted) (see Figures 9−14)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
MIN
TA = 25°C
TYP
MAX
UP TO 85°C
MIN
MAX
UP TO 125°C
MIN
MAX
UNIT
tPLH
tPHL
Propagation
delay time
COM or Yn
Yn or COM
11
14.5
16.5
18.5
ns
tPLH
tPHL
Propagation
delay time
Channel Select
COM or Yn
12.5
16.5
19
22
ns
tPZH
tPZL
Enable
delay time
INH
COM or Yn
85
95
105
ns
tPHZ
tPLZ
Disable
delay time
INH
COM or Yn
85
95
105
ns
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
switching characteristics over recommended operating free-air temperature range,
VCC = 4.5 V, CL = 50 pF (unless otherwise noted) (see Figures 9−14)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
MIN
TA = 25°C
TYP
MAX
UP TO 85°C
MIN
MAX
UP TO 125°C
MIN
MAX
UNIT
tPLH
tPHL
Propagation
delay time
COM or Yn
Yn or COM
8.6
11.5
12.5
13.5
ns
tPLH
tPHL
Propagation
delay time
Channel Select
COM or Yn
10
13
15
17
ns
tPZH
tPZL
Enable
delay time
INH
COM or Yn
80
90
100
ns
tPHZ
tPLZ
Disable
delay time
INH
COM or Yn
80
90
100
ns
switching characteristics over recommended operating free-air temperature range,
VCC = 6 V, CL = 50 pF (unless otherwise noted) (see Figures 9−14)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TA = 25°C
MIN
TYP
MAX
UP TO 85°C
MIN
MAX
UP TO 125°C
MIN
MAX
UNIT
tPLH
tPHL
Propagation
delay time
COM or Yn
Yn or COM
8
10
11
12
ns
tPLH
tPHL
Propagation
delay time
Channel Select
COM or Yn
9.5
12.5
14.5
16.5
ns
tPZH
tPZL
Enable
delay time
INH
COM or Yn
78
80
80
ns
tPHZ
tPLZ
Disable
delay time
INH
COM or Yn
78
80
80
ns
operating characteristics, TA = 25°C (see Figure 15)
PARAMETER
Cpd
6
Power dissipation capacitance
VCC
3.3 V
5V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TEST CONDITIONS
TYP
UNIT
32
No load
37
pF
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
APPLICATION INFORMATION
VCC = 5 V
IIO
VIN2 < VSS or VCC < VIN2
Any Disabled Channel
VSS < VIN1 < VCC
Enabled Channel
Vout = VI1 V ± V∆out
RS
Figure 1. Injection-Current Coupling Specification
5V
6V
5V
VCC
VCC
’HC4051
Sensor
Channel 1
Channel 2
Microcontroller
Channel 3
Channel 4
Channel 5
Channel 6
(8× Identical
Circuitry)
Channel 7
Channel 8
Common Out
A/D − Input
Figure 2. Alternate Solution Requires 32 Passive Components and One Extra 6-V Regulator
to Suppress Injection Current Into a Standard ’HC4051 Multiplexer
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
APPLICATION INFORMATION
VCC
5V
VCC
’HC4851
Sensor
Channel 1
Channel 2
Channel 3
Microcontroller
Channel 4
Channel 5
Channel 6
(8× Identical
Circuitry)
Channel 7
Channel 8
Common Out
A/D − Input
Figure 3. Solution by Applying the ’HC4851 Multiplexer
Gate = VCC
(Disabled)
Disabled Analog Multiplex Input
VIN > VCC + 0.7 V
Common Analog Output
Vout > VCC
P+
P+
+
+
+
N − Substrate (on VCC potential)
Figure 4. Diagram of Bipolar Coupling Mechanism
(Appears if VIN Exceeds VCC, Driving Injection Current Into the Substrate)
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
PARAMETER MEASUREMENT INFORMATION
VCC
VINH = VIL
VCC
VI = VCC to GND
VO
(ON)
GND
r on +
VI – VO
W
IT
IT
V
VI − VO
Figure 5. On-State-Resistance Test Circuit
VCC
16
GND
VCC
OFF
A
VCC
OFF
NC
VINH = VIH
Common O/I
6
8
Figure 6. Maximum Off-Channel Leakage Current, Any One Channel, Test Setup
VCC
VCC
16
GND
VCC
VCC
16
A
ON
Analog I/O
OFF
GND
OFF
VCC
OFF
Common O/I
VCC
VINH =VIH
NC
Common O/I
6
Analog I/O
VINH = VIL
8
6
8
Figure 7. Maximum Off-Channel Leakage Current,
Common Channel, Test Setup
POST OFFICE BOX 655303
Figure 8. Maximum On-Channel Leakage Current,
Channel To Channel, Test Setup
• DALLAS, TEXAS 75265
9
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
PARAMETER MEASUREMENT INFORMATION
VCC
16
VCC
Common O/I
ON/OFF
Analog I/O
OFF/ON
CL†
Test
Point
VCC
Channel
Select
50%
GND
tPLH
6
tPHL
8
Analog
Out
50%
Channel Select
† Includes all probe and jig capacitance
Figure 10. Propagation-Delay Test Setup,
Channel Select to Analog Out
Figure 9. Propagation Delays,
Channel Select to Analog Out
VCC
16
Analog I/O
ON
Common O/I
Test
Point
CL†
VCC
Analog In
50%
GND
tPLH
Analog Out
6
tPHL
8
50%
† Includes all probe and jig capacitance
Figure 11. Propagation Delays,
Analog In to Analog Out
10
POST OFFICE BOX 655303
Figure 12. Propagation-Delay Test Setup,
Analog In to Analog Out
• DALLAS, TEXAS 75265
SCLS542B − SEPTEMBER 2003 − REVISED JANUARY 2004
PARAMETER MEASUREMENT INFORMATION
tf
tf
Enable
tPZL
Position 1 when testing tPHZ and tPZH
Position 2 when testing tPLZ and tPZL
1
2
GND
16
VCC
Analog I/O
1
High
Impedance
VCC
10 kΩ
tPLZ
50 %
Analog
Out
ON/OFF
2
CL
10%
Test
Point
VOL
tPZH
Analog
Out
VCC
90%
50%
10%
tPHZ
50 %
90%
Enable
VOH
6
8
High
Impedance
Figure 14. Propagation-Delay Test Setup,
Enable to Analog Out
Figure 13. Propagation Delays,
Enable to Analog Out
A VCC
16
VCC
ON/OFF
Common O/I
NC
Analog I/O
OFF/ON
VCC
6
11
8
Channel Select
Figure 15. Power-Dissipation Capacitance Test Setup
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
SN74HC4851D
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DE4
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DG4
ACTIVE
SOIC
D
16
40
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DGVR
ACTIVE
TVSOP
DGV
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DGVRE4
ACTIVE
TVSOP
DGV
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DGVRG4
ACTIVE
TVSOP
DGV
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DR
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DRE4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851DRG4
ACTIVE
SOIC
D
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN74HC4851NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN74HC4851PW
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851PWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851PWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851PWR
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851PWRE4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74HC4851PWRG4
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2008
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN74HC4851 :
• Automotive: SN74HC4851-Q1
NOTE: Qualified Version Definitions:
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
19-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
SN74HC4851DGVR
Package Package Pins
Type Drawing
TVSOP
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
DGV
16
2000
330.0
12.4
6.8
4.0
1.6
8.0
12.0
Q1
SN74HC4851DR
SOIC
D
16
2500
330.0
16.4
6.5
10.3
2.1
8.0
16.0
Q1
SN74HC4851PWR
TSSOP
PW
16
2000
330.0
12.4
7.0
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
19-Mar-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN74HC4851DGVR
TVSOP
DGV
16
2000
346.0
346.0
29.0
SN74HC4851DR
SOIC
D
16
2500
333.2
345.9
28.6
SN74HC4851PWR
TSSOP
PW
16
2000
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,40
0,23
0,13
24
13
0,07 M
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–8°
1
0,75
0,50
12
A
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,08
14
16
20
24
38
48
56
A MAX
3,70
3,70
5,10
5,10
7,90
9,80
11,40
A MIN
3,50
3,50
4,90
4,90
7,70
9,60
11,20
DIM
4073251/E 08/00
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DLP® Products
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2009, Texas Instruments Incorporated