PRELIMINARY DATA SHEET 42144 RADIATION TOLERANT FULL BRIDGE POWER DRIVER HYBRID FOR 3-PHASE BRUSHLESS DC MOTORS Features: Applications: • • • • • • • • • • • • • • Designed for 100 krad(Si) Total Dose Hermetically Sealed Package 2A Peak Output Current Built-in High-Side Gate Drive Circuit N- and P-channel MOSFETs for Ease of Drive Electrically Isolated Package Interface Directly with UC1625 Motor Controller Mii MICROCIRCUITS PRODUCTS DIVISION 3-Phase BLDC Motor Control Fin Actuator Control Antenna Deployment Control Mirror Position Control X-Y Table Control Gimbal Stabilization Platform Guidance System DESCRIPTION The 42144 Full Bridge Power Driver Hybrid is designed for high reliability applications in harsh environment. This compact design offers a full-bridge power driver stage for three-phase brushless DC motor applications. The circuit is electrically isolated from the metal case for ease of mounting in the system. The hybrid package provides two mounting ears for ease of assembly and low thermal resistance path. Each phase contains a high-side gate drive circuit for the P-channel power MOSFET, a series gate resistor for the low-side N-channel power MOSFET, and three Schottky diodes. The high-side gate drive circuit accepts an open-collector signal of the application controller circuit and generates required gate voltage to operate the high-side MOSFET. The low-side gate resistor will prevent any oscillations and minimize ringing. As an option, a Schottky diode in series with the low-side MOSFET insures that braking current will not flow backward through the N-channel MOSFET. Sources of the lowside MOSFETs are terminated individually allowing user to configure the desired current sensing option. Micropac 42144 Full Bridge Power Driver Hybrid employed selected components that are capable to perform in radiation environment with minimum degradation. The hybrid will perform over the full military temperature range of –55°C to +125°C. It is fabricated using DSCC certified manufacturing processes that are fully in compliance with MIL-PRF-38534. This device is available in a variety of quality levels from COTS to Class K including any custom screening requirements. The basic data sheet part is environmentally screened to H level in accordance with Table C-IX of MIL-PRF-38534. ABSOLUTE MAXIMUM RATINGS Supply Voltage, VM ................................................................................................................................................60 VDC Peak Pulsed Output Current (< 1% duty cycle) .................................................................................................... 5 A Dielectric Withstanding Voltage ......................................................................................................................... 500 VDC Storage Temperature Range ................................................................................................................. -65ºC to +150ºC Operating Junction Temperature.......................................................................................................... -55ºC to +150ºC Lead Solder Temperature for 10 seconds ............................................................................................................. 300ºC Junction-to case thermal resistance, θJ-C .........................................................................................................TBD ºC/W Case Temperature................................................................................................................................................... 125ºC WEIGHT: .....................................................................................................................................TBD grams (typical) Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: HYBRIDSALES @ MICROPAC.COM 5/22/02 www.micropac.com Pg. 1 of 5 PRELIMINARY DATA SHEET 42144 Full Bridge Power Driver Hybrid RECOMMENDED OPERATING CONDITIONS: Parameter Symbol Motor Supply Voltage Min. Max. Units VM 50 VDC Continuous Output Current IO (ON) 2 A Input Voltage (off) VF (OFF) 0 1 VDC Operating Case Temperature TC -55 125 °C MAX. UNIT td(ON) 25 ns VM = 24VDC, IM = 2A, tr 55 ns VM = 24VDC, IM = 2A td(OFF) 55 ns VM = 24VDC, IM = 2A tf 45 ns VM = 24VDC, IM = 2A RDS(ON) 0.20 ohms VM = 24VDC, IM = 2A MAX. UNIT td(ON) 30 ns VM = 24VDC, IM = 2A tr 50 ns VM = 24VDC, IM = 2A td(OFF) 70 ns VM = 24VDC, IM = 2A tf 70 ns VM = 24VDC, IM = 2A RDS(ON) 0.35 ohms VM = 24VDC, IM = 2A MAX. UNIT ELECTRICAL SPECIFICATIONS TC= 25°C unless otherwise specified Switching Characteristics (N-Channel, lower switches) CHARACTERISTICS Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time On-State Resistance SYM. MIN. TYP. TEST CONDITIONS Switching Characteristics (P-Channel, upper switches) CHARACTERISTICS Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time On-State Resistance SYM. MIN. TYP. TEST CONDITIONS Diode Characteristics CHARACTERISTICS SYM. MIN. TYP. TEST CONDITIONS Forward Voltage VF 0.6 VDC VM = 24VDC, IM = 2A Forward Time tr TBD ns VM = 24VDC, IM = 2A Reverse Recovery Time trr TBD ns VM = 24VDC, IM = 2A Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: HYBRIDSALES @ MICROPAC.COM 5/22/02 www.micropac.com Pg. 2 of 5 PRELIMINARY DATA SHEET 42144 Full Bridge Power Driver Hybrid High Side Input Specifications (Open Collector) PARAMETERS VCE(OFF) VCE(SAT) Rise Time Fall Time MIN TBD TBD TBD TBD MAX TBD TBD TBD TBD UNIT VDC VDC ns ns TEST CONDITIONS MAX 15 0.5 300 -300 TBD TBD UNIT VDC VDC mA mA ns ns TEST CONDITIONS @ IM = 2A Low Side Input Specifications PARAMETERS Vin (Hi) Vin (Lo) Iin (Hi) Iin (Lo) Rise Time Fall Time MIN 0 VM PH n High Side Gate Drive Circuit Q1 CR1 Øn GND CR3 CR2 PL n RG Q2 Rn EQUIVALENT SCHEMATIC PER PHASE Figure 1. Block Diagram Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: HYBRIDSALES @ MICROPAC.COM 5/22/02 www.micropac.com Pg. 3 of 5 PRELIMINARY DATA SHEET 42144 Full Bridge Power Driver Hybrid Pin* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Symbol VM GND OA OB OC PH A PH B PH C PL A PL B PL C RA RB RC NC NC NC NC Function Motor Bus Voltage GROUND OUTPUT, Phase A OUTPUT, Phase B OUTPUT, Phase C INPUT, High Side, Phase A INPUT, High Side, Phase B INPUT, High Side, Phase C INPUT, Low Side, Phase A INPUT, Low Side, Phase B INPUT, Low Side, Phase C Current Sense, Phase A Current Sense, Phase B Current Sense, Phase C Not Used Not Used Not Used Not Used *Tentative Pin assignment. Figure 2. Pin Function Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: HYBRIDSALES @ MICROPAC.COM 5/22/02 www.micropac.com Pg. 4 of 5 PRELIMINARY DATA SHEET 42144 Full Bridge Power Driver Hybrid 0.300 1.30 1.050 0.060 0.125 0.250 Ø 0.128 (2 PLCS) 0.122 0.250 0.125 R 0.030 MAX (4 PLCS) 1.00 1.250 1.50 R 0.063 (2 PLCS) NOTE 1 0.030 (18 PLCS) 0.175 CL 0.500 MIN 0.100 (16 PLCS) 0.150 0.800 NOTES: 1. PIN #1 SHALL BE IDENTIFIED BY A CONTRASTING COLOR BEAD. 2. ALL DIMENSIONS IN INCHES. Figure 3. Case Outline Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: HYBRIDSALES @ MICROPAC.COM 5/22/02 www.micropac.com Pg. 5 of 5