66158 SINGLE CHANNEL OPTOCOUPLER DIRECT REPLACEMENT FOR 3C92C Mii OPTOELECTRONIC PRODUCTS DIVISION REVISION B 12/29/00 Features: Applications: • • • • • • • • • • High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66158 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage....................................................................................................................................................... 500V Emitter-Collector Voltage........................................................................................................................................................ 7V Collector-Emitter Voltage (value applies to emitter-base open-circuited & the input-diode equal to zero) ........................ 60V Reverse Input Voltage ........................................................................................................................................................... 7V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ................................. 50mA Peak Forward Input Current (value applies for tw < 1µs, PRR < 300 pps) .....................................................................500mA Continuous Collector Current ............................................................................................................................................ 50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .............................. 230mW Storage Temperature........................................................................................................................................-65°C to +150°C Operating Free-Air Temperature Range ..........................................................................................................-55°C to +125°C Lead Solder Temperature (10 seconds max.) ................................................................................................................ 260°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 2.3 mW/°C. Package Dimensions 4 LEADS 0.019Ø (0.48) 0.016Ø (0.41) 0.230Ø (5.84) 0.209Ø (5.31) Schematic Diagram COLLECTOR Ø0.100[2.54] 3 EMMITTER ANODE 0.195Ø (4.95) 2 4 0.178Ø (4.52) 0.048 [1.22] 0.028 [0.71] 1 CATHODE 0.030 (0.76) MAX 0.210 [5.34] 0.170 [4.32] 45° 0.046 [1.17] 0.036 [0.91] 0.50 [12.70] MIN DIMENSIONS ARE IN INCHES (MILLIMETERS) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 46 66158 REVISION B SINGLE CHANNEL OPTOCOUPLER (Direct Replacement for 3C92C) 12/29/00 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current IR Input Diode Static Forward Voltage VF Input Diode Static Forward Voltage VF Reverse Breakdown Voltage BVR Input Diode Capacitance CIN MIN 7 TYP MAX UNITS TEST CONDITIONS 1 µA VR = 3V 1.15 1.2 V IF = 2mA 1.3 1.5 V IF = 50mA 12 V IR = 100µA 25 pF V = 0V, f = 1MHz UNITS TEST CONDITIONS OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. PARAMETER SYMBOL MIN Collector-Emitter Breakdown Voltage V(BR)CEO 50 V IC = 1mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V IC = 10µA, IE = 10µA, IF = 0 Collector-Emitter Dark Current TYP MAX ICEO1 50 nA VCE = 50V, IF = 0mA ICEO2 10 nA VCE = 5V, IF = 0mA MAX UNITS TEST CONDITIONS mA VCE = 5V, IF = 10mA mA VCE = 0.4V, IF = 10mA mA VCE = 5V, IF = 10mA V IF = 50mA, IC = 10mA Ω VIN-OUT = 500V COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. SYMBOL MIN On State Collector Current PARAMETER IC(ON) 4 On State Collector Current IC(ON) 3 IC(ON) 2 -55°C On State Collector Current Collector-Emitter Saturation Voltage TYP 20 VCE(SAT) 0.4 9 Isolation Resistance RISO 10 Input to Output Capacitance CIO 2 2.5 pF f = 1MHz Delay Time td 2 4 µs VCE = 5V, IF = 2mA, RL = 100Ω Storage Time ts 0.2 0.5 µs VCE = 5V, IF = 2mA, RL = 100Ω Rise Time tr 3 5 µs VCE = 5V, IF = 2mA, RL = 100Ω Fall Time tf 4 5 µs VCE = 5V, IF = 2mA, RL = 100Ω RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 1 µA Input Current, High Level IFH 2 10 mA Supply Voltage VCE 5 50 V TA -55 125 °C Operating Temperature UNITS SELECTION GUIDE PART NUMBER 66158-011 66158-101 66158-001 PART DESCRIPTION Single Channel optocoupler, military operating range (-55° to +125°C) Single Channel optocoupler, full mil-temp (-55° to +125°C) with 100% device screening Single Channel optocoupler, commercial (0° to 70°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 47