66163 Mii SINGLE CHANNEL OPTOCOUPLERS DIRECT REPLACEMENT FOR 3C91C OPTOELECTRONIC PRODUCTS DIVISION REVISION C 12/29/00 Features: Applications: • • • • • • • • • • High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66163 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage...........................................................................................................................................................500V Emitter-Collector Voltage............................................................................................................................................................5V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................60V Reverse Input Voltage ...............................................................................................................................................................7V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .....................................50mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .......................................................................500mA Continuous Collector Current ................................................................................................................................................50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................230mW Storage Temperature.......................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C Lead Solder Temperature (10 seconds max.) .................................................................................................................... 260°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 2.3 mW/°C. Package Dimensions 4 LEADS 0.019Ø (0.48) 0.016Ø (0.41) 0.230Ø (5.84) 0.209Ø (5.31) Schematic Diagram EMITTER Ø0.100[2.54] 3 COLLECTOR ANODE 0.195Ø (4.95) 2 4 0.178Ø (4.52) 0.048 [1.22] 0.028 [0.71] 1 CATHODE 0.030 (0.76) MAX 0.210 [5.34] 0.170 [4.32] 45° 0.046 [1.17] 0.036 [0.91] 0.50 [12.70] MIN DIMENSIONS ARE IN INCHES (MILLIMETERS) NOTE: ANODE ELECTRICALLY CONNECTED TO CASE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 44 66163 SINGLE CHANNEL OPTOCOUPLER (Direct Replacement for 3C91C) REVISION C 12/29/00 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current IR Input Diode Static Forward Voltage VF Input Diode Static Forward Voltage VF Reverse Breakdown Voltage BVR Input Diode Capacitance CIN MIN 7 TYP MAX UNITS TEST CONDITIONS 1 µA VR = 3V 1.15 1.2 V IF = 2mA 1.3 1.5 V IF = 50mA 12 V IR = 100µA 25 pF V = 0V, f = 1MHz UNITS TEST CONDITIONS OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. SYMBOL MIN Collector-Emitter Breakdown Voltage PARAMETER V(BR)CEO 50 V IC = 1mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V IC = 0mA, IE = 10µA, IF = 0 60 10 nA nA VCE = 50V, IF = 0mA VCE = 5V, IF = 0mA MAX UNITS TEST CONDITIONS mA VCE = 5V, IF = 10mA mA VCE = 0.4V, IF = 10mA Collector-Emitter Dark Current TYP MAX ICEO1 ICEO2 COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. SYMBOL MIN On State Collector Current PARAMETER IC(ON) 4 On State Collector Current IC(ON) 3 TYP 20 On State Collector Current -55°C IC(ON) 2 mA VCE = 5V, IF = 10mA On State Collector Current -X07 -107 IC(ON) 20 mA VCE = 5V, IF = 10mA V IF = 50mA, IC = 10mA Ω VIN-OUT = 500V Collector-Emitter Saturation Voltage 0.4 VCE(SAT) 9 Isolation Resistance RISO Input to Output Capacitance CIO 2 2.5 pF f = 1MHz Delay Time td 2 4 µs VCE = 5V, IF = 2mA, RL = 100Ω Storage Time ts 0.2 0.5 µs VCE = 5V, IF = 2mA, RL = 100Ω Rise Time tr 3 5 µs VCE = 5V, IF = 2mA, RL = 100Ω Fall Time tf 4 5 µs VCE = 5V, IF = 2mA, RL = 100Ω 10 RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS IFL 0 1 µA Input Current, High Level IFH 2 10 mA Supply Voltage VCE 5 50 V TA -55 125 °C Input Current, Low Level Operating Temperature SELECTION GUIDE PART NUMBER 66163-001 66163-011 66163-101 66163-017 66163-107 PART DESCRIPTION Single Channel optocoupler, commercial (0° to 70°C) Single Channel optocoupler full military operating temperature range Single Channel optocoupler tested over full military temperature range with 100% device screening Single Channel optocoupler full military operating temperature range w/200% CTR Single Channel optocoupler tested over full military temperature range with 100% device screening w/200% CTR MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 45