66193 Mii SINGLE CHANNEL OPTOCOUPLERS REPLACEMENT FOR 3C91C Features: Applications: • • • • • • • • • • High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation OPTOELECTRONIC PRODUCTS DIVISION Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66193 contains a proton tolerant LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The anode of the LED is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage...........................................................................................................................................................500V Emitter-Collector Voltage............................................................................................................................................................5V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................60V Reverse Input Voltage ...............................................................................................................................................................7V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .....................................50mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .........................................................................50mA Continuous Collector Current .....................................................................................................................................................1A Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................300mW Storage Temperature.......................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................. -55°C to +100°C Lead Solder Temperature (10 seconds max.) .................................................................................................................... 240°C Notes: 1. Derate linearly to +65°C free-air temperature at the rate of 1.15 mA/°C. 2. Derate linearly to 100°C free-air temperature at the rate of 3 mW/°C. Package Dimensions 4 LEADS 0.019Ø (0.48) 0.016Ø (0.41) 0.230Ø (5.84) 0.209Ø (5.31) Schematic Diagram EMITTER Ø0.100[2.54] 3 COLLECTOR ANODE 0.195Ø (4.95) 4 2 0.178Ø (4.52) 0.048 [1.22] 0.028 [0.71] 1 CATHODE 0.030 (0.76) MAX 0.210 [5.34] 0.170 [4.32] 45° 0.046 [1.17] 0.036 [0.91] 0.50 [12.70] MIN DIMENSIONS ARE IN INCHES (MILLIMETERS) NOTE: ANODE ELECTRICALLY CONNECTED TO CASE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 44 66193 SINGLE CHANNEL OPTOCOUPLER (Replacement for 3C91C) ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. MAX UNITS TEST CONDITIONS Input Diode Static Reverse Current PARAMETER SYMBOL IR 1 µA VR = 3V Input Diode Static Forward Voltage VF 2.0 V IF = 10mA Input Diode Static Forward Voltage VF 2.2 V IF = 20mA 12 V IR = 100µA 25 PF V = 0V, f = 1MHz Reverse Breakdown Voltage BVR Input Diode Capacitance CIN MIN 7 TYP OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. SYMBOL MIN UNITS TEST CONDITIONS Collector-Emitter Breakdown Voltage PARAMETER V(BR)CEO 50 V IC = 1mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V Collector-Emitter Dark Current TYP MAX ICEO1 ICEO2 IC = 10µA 100 10 nA nA MAX VCE = 50V, VCE = 5V, IF = 0mA IF = 0mA COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. SYMBOL MIN UNITS TEST CONDITIONS On State Collector Current PARAMETER IC(ON) 4 mA VCE = 5V, IF = 10mA On State Collector Current IC(ON) 3 mA VCE = 0.4V, IF = 10mA IC(ON) 2 mA VCE = 5V, IF = 10mA V IF = 50mA, IC = 10mA Ω VIN-OUT = 500V -55°C On State Collector Current Collector-Emitter Saturation Voltage TYP 0.4 VCE(SAT) 9 Isolation Resistance RISO Input to Output Capacitance CIO 2 2.5 pF f = 1MHz Delay Time td 2 4 µs VCE = 5V, IF = 2mA, RL = 100Ω Storage Time ts 0.2 0.5 µs VCE = 5V, IF = 2mA, RL = 100Ω Rise Time tr 3 5 µs VCE = 5V, IF = 2mA, RL = 100Ω Fall Time tf 4 5 µs VCE = 5V, IF = 2mA, RL = 100Ω 10 RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 1 µA Input Current, High Level IFH 2 20 mA Supply Voltage VCE 5 50 V TA -55 100 °C Operating Temperature UNITS SELECTION GUIDE PART NUMBER 66193-001 66193-011 66193-101 PART DESCRIPTION Single Channel optocoupler, commercial (0° to 70°C) Single Channel optocoupler –55 to +100°C Single Channel optocoupler –55 to+100°C with 100% device screening MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 45