4N22A 4N23A 4N24A OPTOELECTRONIC PRODUCTS DIVISION Features: Applications: • • • • • • • • • • • Mii JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS Collector is electrically isolated from the case. Overall current gain...1.5 typical (4N24A) Base lead provided for conventional transistor biasing Rugged package High gain, high voltage transistor +1kV electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically sealed metal case. The 4N22A, 4N23A and 4N24A can be tested to customer specifications, as well as to MIL-PRF-19500 JAN, JANS, JANTX, and JANTXV quality levels. *ABSOLUTE MAXIMUM RATINGS Input to Output Voltage............................................................................................................................................................. ±1kV Emitter-Collector Voltage..............................................................................................................................................................4V Collector-Emitter Voltage............................................................................................................................................................35V Collector-Base Voltage ...............................................................................................................................................................35V Reverse Input Voltage .................................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................... 40mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .................................................................................1A Continuous Collector Current ................................................................................................................................................. 50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................... 300mW Storage Temperature............................................................................................................................................. -65°C to +125°C Operating Free-Air Temperature Range ............................................................................................................... -55°C to +125°C Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds) ..................................................................................240°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 5 mW/°C. Package Dimensions * JEDEC registered data Schematic Diagram 0.040 [1.02] MAX. 0.305 [7.75] 0.335 [8.51] C 6 LEADS 0.016Ø [0.41] 0.019Ø [0.48] 0.500 [12.70] MIN. 0.155 [3.94] 0.185 [4.70] 5 0.022Ø [5.08] 3 0.045 [1.14] 0.029 [0.73] 6 7 2 1 5 3 A E 1 45° 0.034 [0.864] 0.028 [0.711] TO5 7 K NOTE: ALL LINEAR DIMENSIONS ARE IN INCHES (MILLIMETERS) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 10 B 2 4N22A, 4N23A, and 4N24A JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS *ELECTRICAL CHARACTERISTICS INPUT LED TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN MAX UNITS Input Diode Static Reverse Current Input Diode Static Forward Voltage IR -55°C +25°C +125°C VF µA VR = 2V 1.5 1.3 1.2 V IF = 10mA MAX 1 0.8 0.7 *OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN TEST CONDITIONS 100 UNITS TEST CONDITIONS Collector-Base Breakdown Voltage V(BR)CBO 35 V IC = 100µA, IB = 0, IF = 0 Collector-Emitter Breakdown Voltage V(BR)CEO 35 V IC = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 4 V IC = 0, IE = 100µA, IF = 0 *COUPLED CHARACTERISTICS PARAMETER SYMBOL MIN UNITS TEST CONDITIONS mA VCE = 5V, IB = 0, IF = 2mA IC(ON) 0.15 0.2 0.4 4N22A 4N23A 4N24A 2.5 6 10 mA IC(ON) On State Collector Current -55°C 4N22A 4N23A 4N24A 1 2.5 4 mA IC(ON) On State Collector Current +100°C 4N22A 4N23A 4N24A 1 2.5 4 mA IC(ON) On State Collector Current NOTE TA = 25°C Unless otherwise specified 4N22A 4N23A 4N24A On State Collector Current NOTE MAX NOTE VCE = 5V, IB = 0, IF = 10mA VCE = 5V, IB = 0, IF = 10mA VCE = 5V, IB = 0, IF = 10mA Off State Collector Current +25°C IC(OFF) 100 nA Off State Collector Current +100°C IC(OFF) 100 µA VCE = 20V, IB = 0, IF = 0mA VCE(SAT) VCE(SAT) VCE(SAT) 0.3 0.3 0.3 V V V IC = 2.5mA, IB = 0, IF = 20mA IC = 5mA, IB = 0, IF = 20mA IC = 10mA, IB = 0, IF = 20mA VIN-OUT = 1kV 1 F = 1MHz, VIN-OUT = 1kV 1 Collector-Emitter Saturation Voltage 4N22A 4N23A 4N24A 11 Input to Output Resistance RI-O Input to Output Capacitance CI-O 5 pF 4N22A 4N23A 4N24A tr tr tr 15 15 20 µs 4N22A 4N23A 4N24A tf tf tf 15 15 20 Rise Time Fall Time 10 µs VCE = 20V, IB = 0, IF = 0mA VCC = 10V, IF = 10mA, RL = 100Ω µs µs µs VCC =10V, IF = 10mA, RL = 100Ω µs NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 11 4N22A, 4N23A, and 4N24A JAN, JANTX, JANTXV, SINGLE CHANNEL OPTOCOUPLERS RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 100 µA Input Current, High Level IFH 2 10 mA VCE 5 10 V Supply Voltage UNITS SELECTION GUIDE PART NUMBER JAN4N22A JAN4N23A JAN4N24A JANTX4N22A JANTX4N23A JANTX4N24A JANTXV4N22A JANTXV4N23A JANTXV4N24A PART DESCRIPTION 4N22A Optocoupler, JAN Screening level 4N23A Optocoupler, JAN Screening level 4N24A Optocoupler, JAN Screening level 4N22A Optocoupler, JANTX Screening level 4N23A Optocoupler, JANTX Screening level 4N24A Optocoupler, JANTX Screening level 4N22A Optocoupler, JANTXV Screening level 4N23A Optocoupler, JANTXV Screening level 4N24A Optocoupler, JANTXV Screening level * JEDEC registered data MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 12