8 PIN DIP 400 V BREAKDOWN VOLTAGE 2-CH OPTICAL COUPLED MOSFET PS7141-2A PS7141L-2A FEATURES DESCRIPTION • 2 CHANNEL TYPE: (1a + 1a output) PS7141-2A and PS7141L-2A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE: 8 pin DIP • LOW OFFSET VOLTAGE • LOW LED OPERATING CURRENT: (IF = 2 mA) APPLICATIONS • SURFACE MOUNT AVAILABLE: PS7141-2A • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER MOS Diode FET SYMBOLS UNITS VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA ILOFF Off-State Leakage Current, COUT Output Capacitance, VD = 0 V, f = 1 MHz IFon Coupled PS7141-2A, PS7141L-2A PARAMETERS VD = 400 V LED On-state Current, IL = 150 mA MIN TYP MAX 1.2 1.4 5.0 µA 0.03 pF/ch 65 1.0 mA On-State Resistance, Ron1 Ron2 tON tOFF Turn-on Time 1 Turn-off Time1 RI-O Isolation Resistance, VI-O = 1.0 kV CI-O Isolation Capacitance, V = 0 V, f = 1 MHz 2.0 Ω IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 150 mA, t ≤ 10 ms IF = 10 mA, VO = 5 V, PW ≥ 10 ms 20 16 0.35 0.06 ms Ω 30 25 1.0 0.2 109 pF/ch 1.1 Note: 1. Test Circuit for Switching Time: PS7141-2A, PS7141L-2A IF Pulse Input VL Input 8 7 6 5 1 2 3 4 50% 0 Input Monitor VO Monitor Rin RL VO = 5 V 90% Output 10% ton toff California Eastern Laboratories PS7141-2A, PS7141L-2A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PARAMETERS UNITS RATINGS mA V mW/ch A 50 5.0 50 1 V mA 400 150 mA mW/ch 300 375 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER Forward Current (DC) Reverse Voltage Power Dissipation Peak Foward Current2 Break Down Voltage Continuous Load Current Pulse Load Current3 AC/DC Connection Power Dissipation PD Coupled BV Isolation Voltage4 Vr.m.s. 1500 PT Total Power Dissipation mW 850 TA Operating Ambient Temp. °C -40 to +80 TSTG Storage Temperature °C -40 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 %. 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. PS7141-2A,PS7141L-2A SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage UNITS mA V MIN TYP MAX 2 10 20 0 0.5 ORDERING INFORMATION PART NUMBER PACKAGE PACKING STYLE PS7141-2A 8 PIN DIP Magazine case 50 pcs PS7141L-2A PS7141L-2A-E3 Embossed Tape 1000 pcs/reel PS7141L-2A-E3 OUTLINE DIMENSIONS (Units in mm) PS7141L-2A PS7141-2A 9.25±0.5 9.25±0.5 6.5±0.5 3.5±0.3 4.15±0.3 7.62 6.5±0.5 +0.10 0.10 -0.05 3.5±0.3 1.34±0.1 3.3±0.3 1.34 ± 0.10 2.54 0.25 M 0.50 ± 0.10 0 to 15 ˚ PIN CONNECTION (Top View) PS7141-2A, PS7141L-2A 8 7 6 5 1 2 3 4 1. 2. 3. 4. 5. 6. 7. 8. LED Anode1 LED Cathode1 LED Anode2 LED Cathode2 MOSFET 2 MOSFET 2 MOSFET 1 MOSFET 1 2.54 0.9±0.25 9.60±0.4 PS7141-2A, PS7141L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 200 100 0 -25 100 0 25 50 80 75 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE 1.8 100 200 1.6 1.4 Output Capacitance, (pF) Forward Voltage, VF (V) f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.2 1.0 0.8 -25 0 25 50 75 100 150 100 50 0 20 40 60 80 100 Ambient Temperature, TA (°C) Supply Voltage, VCC (V) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10-5 120 200 TA = 80 °C Load Current, IL (mA) Off-State Leakage Current, ILOFF (A) IF = 10 mA 10-6 10-7 TA = 25 °C 10 -8 10 -9 0 100 200 300 400 Supply Voltage, VCC (V) 500 100 -4.0 -2.0 0 2.0 -100 -200 Load Voltage, VL (V) 4.0 PS7141-2A, PS7141L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) ON-STATE DISTRIBUTION 30 3.0 Normalized to 1.0 at TA = 25 °C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 n = 50 pcs IF = 10 mA IL = 10 mA 25 Number (pcs) Normialized On-State Resistance, RON NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 20 15 10 5 0.5 0 0.0 -25 0 25 50 75 20 100 21 Ambient Temperature, TA (°C) On-State Resistance, RON (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 12 0.30 VO = 5 V VO = 5 V 0.25 Turn-off Time, tOFF(ms) Turn-on Time, tON (ms) 10 8 6 4 2 0 0.15 0.10 0.05 5 10 15 20 25 30 0 5 10 15 20 25 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 15 10 5 n = 50 pcs IF = 10 mA VO = 5 V 25 Number (pcs) 20 20 15 10 5 0 0.3 0.4 Turn-on Time, TON (ms) 30 30 n = 50 pcs IF = 10 mA VO = 5 V 25 Number (pcs) 0.20 0 0.04 0.08 Turn-on Time, TOFF (ms) PS7141-2A, PS7141L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 °C, IF = 10 mA, VO = 5V 2.5 Normalized Turn-off Time, tOFF Normalized Turn-on Time, tON 3.0 2.0 1.5 1.0 0.5 0.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5V 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 -25 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) TAPING SPECIFICATIONS (Units in mm) 10.4 ± 0.1 2.0 ± 0.5 0.3 R 1.0 φ80.0 ± 5.0 φ13.0 ± 0.5 φ330 7.5 ± 0.1 1.55 ± 0.1 4.3 ± 0.2 10.3 ± 0.1 1.55 ± 0.1 16.0 ± 0.3 2.0 ± 0.1 4.0 ± 0.1 OUTLINE AND DIMENSIONS (REEL) 1.75 ± 0.1 OUTLINE AND DIMENSIONS (TAPE) φ21.0 ± 0.8 12.0 ± 0.1 +2.0 16.4- 0.0 Notes: 1. Packaging : 1000 pcs/reel TAPING DIRECTION PS7141L-2A-E3 PS7141L-2A-E4 PS7141-2A, PS7141L-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 10/30/2001