8-PIN SOP SOLID STATE RELAY PS7241-AT1 PS7241-AT5 FEATURES DESCRIPTION • 2 CHANNEL TYPE: OCMOS FET + PHOTOCOUPLER PS7241-AT1 and PS7241-AT5 are solid state relays containing a GaAs LED on the emitting side (input side) and MOSFETs (+ Phototransistor) on the output side. They are suitable for analog signal control because of their low offset and high linearity. • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE: 8-PIN SOP • ISOLATION VOLTAGE: BV: 1500 Vr.m.s. MIN APPLICATIONS • LOW OFFSET VOLTAGE • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT • LOW LED OPERATING CURRENT: IF = 2 mA • AVAILABLE IN TAPE AND REEL ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS PARAMETERS CONDITIONS VF Forward Voltage IF = 5 mA V IR OCMOS FET Diode MOSFET Photocoupler Diode Transistor MIN TYP MAX 1.2 1.4 1.0 Reverse Current VR = 5 V µA Off-state Leakage Current VD = 400 V µA 0.03 Cout Output Capacitance VD = 0 V, f = 1 MHz pF 65 IFon LED On-state Current IL = 120 mA mA On-state Resistance IF = 10 mA, IL = 10 mA Ω IF = 10 mA, IL = 120 mA, t≤10 ms Ω RON2 tON Turn-on Time tOFF Turn-off Time RI-O Isolation Resistance VI-0 = 1.0 kV Ω CI-O IF = 10 mA, VO = 5 V, PW ≥10 ms 5.0 2.0 20 30 25 ms 0.3 1.0 ms 0.04 0.2 109 Isolation Capacitance V = 0 V, f = 1 MHz pF 1.1 VF Forward Voltage IF = 10 mA V 1.2 IR Reverse Current1 VR = 5 V µA 5.0 Collector to Emitter Dark Current VCE = 40 V, IF = 0 mA nA 100 ICEO BVCEO Collector to Emitter Breakdown Voltage IC = 1 mA V BVECO Emitter to Collector Breakdown Voltage IE = 100 µA V 6 Current Transfer Ratio IF = 5 mA, VCE = 5 V % 50 CTR Coupler UNITS ILOFF RON1 Coupler PS7241-AT1, PS7241-AT5 VCE(sat) 40 400 Collector Saturation Voltage IF = 10 mA, IC = 2 mA V RI-O Isolation Resistance Vin-out = 1.0 kVcc Ω CI-O Isolation Capacitance V = 0 V, f = 1 MHz pF 0.4 Rise Time Fall Time Vcc = 5 V, Ic = 2 mA RL = 100 Ω µs µs 3.0 5.0 tR tF Note: 1. PS7241-AT1 only. 1.4 0.3 1011 PS7241-AT1, PS7241-AT5 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) OCMOS SYMBOLS Diode IF VR PARAMETERS UNITS RATINGS mA V 50 5.0 mW/ch 50 A 1.0 Break Down Voltage Continuous Load Current Pulse Load Current3 (AC/DC Connection) V mA mA 400 120 250 PD Power Dissipation mW 430 Diode IF VR Forward Current Reverse Voltage4 mA V 50 5.0 PS7241-AT1-F3 PD Power Dissipation mW/ch 50 PS7241-AT5 A 1.0 PS7241-AT5-F3 Forward Current (DC) Reverse Voltage Power Dissipation PD Peak Forward Current2 IFP MOSFET VL IL ILP Photocoupler RECOMMENDED OPERATING CONDITIONS (TA = 25˚C) Peak Forward Current2 IFP Transistor VCEO SYMBOLS PARAMETERS OCMOS FET IF LED Operating Current VF LED Off Voltage UNITS MIN TYP MAX mA V 2 0 10 20 0.5 ORDERING INFORMATION PART NUMBER PACKAGE PS7241-AT1 8-pin SOP PACKING STYLE Magazine case 45 pcs Embossed Tape 1500 pcs/reel PS7241-AT1-F4 Magazine case 45 pcs Embossed Tape 1500 pcs/reel PS7241-AT5-F4 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Isolation Voltage5 Total Power Dissipation Operating Ambient Temp. Storage Temperature VECO IC PC BV PT TA TSTG V V mA mW Vr.m.s. mW °C °C 40 6.0 80 100 1500 630 -40 to 80 -40 to 100 Notes: 1 .Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot. 4. PS7241-AT1 only. 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and ouput. OUTLINE DIMENSIONS (Units in mm) PS7241-AT5 PS7241-AT1 9.08±0.5 (TOP VIEW) 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 7.0±0.3 4.4 4.4 +0.08 2.05 -0.05 +0.10 +0.10 2.54 2.54 1 2 3 4 5 6 7 8 LED Anode LED Cathode Tr Collector Tr Emitter LED Anode LED Cathode MOSFET MOSFET 0.4 -0.05 +0.08 0.5±0.3 2.54 +0.10 +0.10 7.0±0.3 0.4 -0.05 +0.08 0.5 -0.05 (TOP VIEW) 8 0.15 -0.05 +0.08 2.05 -0.05 9.08±0.5 0.4±0.3 0.15 -0.05 0.4±0.3 0.5 -0.05 0.5±0.3 2.54 2.54 2.54 1 2 3 4 5 6 7 8 LED Anode LED Cathode Tr Collector Tr Emitter LED Anode/Cathode LED Cathode/Anode MOSFET MOSFET PS7241-AT1, PS7241-AT5 OCMOS TYPICAL PERFORMANCE CURVES (TA = 25˚C) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 100 0.3 Maximum Load Current, IL (A) Maximum Forward Current (DC), IF (mA) MAXIMUM FORWARD CURRENT (DC) vs. AMBIENT TEMPERATURE 80 60 40 20 0.2 0.1 0 0 -20 0 20 40 60 80 -20 100 0 20 40 60 80 Ambient Temperature, TA (˚C) Ambient Temperature, TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE 2.0 100 200 1.5 IF = 30 mA IF = 20 mA IF = 10 mA 1.0 IF = 5 mA 0.5 0.0 -40 -20 0 20 40 60 80 Output Capacitance (pF) Forward Voltage, VF (mA) f = 1 MHz 100 150 100 50 0 20 40 80 100 Ambient Temperature, TA (˚C) Supply Voltage VCC (V) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10 -5 120 150 IF = 10 mA 100 TA = 80 °C 10 -6 10 -7 TA = 25 °C 10 -8 Load Current IL (mA) Off-State Leakage Current ILOFF (A) 60 50 -3.0 -2.0 -1.0 0 1.0 -50 -100 10 -9 -150 0 100 200 300 400 Supply Voltage VCC (V) 500 Load Voltage VL (V) 2.0 3.0 PS7241-AT1, PS7241-AT5 OCMOS TYPICAL PERFORMANCE CURVES (TA = 25˚C) ON-STATE RESISTANCE DISTRIBUTION 30 3.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA IL = 1 mA 2.5 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 2.0 Number (pcs) Normalized On-State Resistance, RON NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 1.5 1.0 20 15 10 5 0.5 0 0 -25 0 25 75 50 100 20 21 Ambient Temperature, TA (˚C) On-State Resistance, RON (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 0.30 6.0 VL = 5 V, RL = 500 Ω VL = 5 V RL = 500 Ω 0.25 Turn-off Time, tOFF (ms) Turn-on Time, tON (ms) 5.0 4.0 3.0 2.0 0.15 0.10 0.05 1.0 0 0 0 5 10 15 20 25 0 30 5 10 15 20 25 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 30 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 25 20 15 10 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 25 Number (pcs) Number (pcs) 0.20 20 15 10 5 5 0 0 0.3 0.4 Turn-on Time, tON (ms) 0.04 0.08 Turn-off Time, tOFF (ms) 30 PS7241-AT1, PS7241-AT5 OCMOS TYPICAL PERFORMANCE CURVES (TA = 25˚C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 2.5 Normalized Turn-off Time, tOFF Normalized Turn-on Time, tON 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 2.5 2.0 1.5 1.0 0.0 -25 100 0 25 50 75 100 Ambient Temperature, TA (˚C) Ambient Temperature, TA (˚C) PHOTOCOUPLER TYPICAL PERFORMANCE CURVES (TA = 25˚C) MAXIMUM COLLECTOR CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 200 Max Collector Current, IC (mA) 75 50 25 25 50 75 80 100 50 50 75 80 100 Ambient Temperature, TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE TA = 100 °C 75 °C 50 °C 10 25 °C 0 °C -25 °C -55 °C 1 0.1 0.01 0.6 25 100 100 Forward Current, IF (mA) 150 0 0 Collector to Emitter Dark Current, ICEO (nA) Max Forward Current, IF (mA) 100 0.8 1 1.2 1.4 Forward Voltage, VF (V) 1.6 10000 40 V 24 V 10 V 1000 100 10 1 0.1 -60 -40 -20 0 20 40 60 80 Ambient Temperature, TA (˚C) 100 PS7241-AT1, PS7241-AT5 PHOTOCOUPLER TYPICAL PERFORMANCE CURVES (TA = 25˚C) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 50 25 mA 20 Collector Current, IC (mA) Collector Current, IC (mA) 10 mA 10 5 mA 5 2 2 mA 1 IF = 1 mA 0.5 30 40 mA 20 mA 30 15 mA 20 10 mA 10 IF = 5 mA 0.2 0.1 0 0.2 0.4 0.6 0.8 0 1.0 6 8 10 NORMALIZED OUTPUT CURRENT vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO (CTR) vs. FORWARD CURRENT 300 Current Transfer Ratio, CTR (%) Normalized Output Current, ∆CTR 4 Collector to Emitter Voltage, VCE (V) 1.2 1.0 0.8 0.6 0.4 0.2 Normalized to 1.0 at TA = 25 °C IF = 5 mA, VCE = 5 V 0 -50 -25 0 25 50 75 VCE = 5 V 250 200 150 100 50 0.05 0.1 100 0.5 1 5 10 Ambient Temperature, TA (˚C) Forward Current, IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 50 1000 VCC = 5 V IC = 2 mA 50 IF = 5 mA VCC = 5 V TA = 25 °C CTR = 100% 500 Switching Time, t (µs) ton Switching Time, t (µs) 2 Collector Saturation Voltage, VCE(sat), (V) toff 10 5 td ts 1 tf 100 ts 50 10 5 tr 1 0.5 0.5 td 0.1 50 100 500 1K Load Resistance, RL (Ω) 2K 100 500 1K 5K 10K Load Resistance, RL (Ω) 50K 100K PS7241-AT1, PS7241AT5 TAPING SPECIFICATIONS (Units in mm) φ13.0 ± 1.0 φ330 2.0 ± 0.5 φ100±5.0 φ21.0 ± 0.8 7.5 ± 0.1 2.8 ± 0.1 10.45 ± 0.1 1.55 ± 0.1 16.0 ± 0.3 2.0 ± 0.1 4.0 ± 0.1 OUTLINE AND DIMENSIONS (REEL) 1.75 ± 0.1 OUTLINE AND DIMENSIONS (TAPE) 0.3 1.55 ± 0.1 7.6 ± 0.1 12.0 ± 0.1 +2.0 16.4- 0.0 Notes: 1. Packaging : 1500 pcs/reel TAPING DIRECTION PS7241-AT1-F3 PS7241-AT5-F3 PS7241-AT1-F4 PS7241-AT5-F4 PS7241-AT1, PS7241AT5 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. • Avoid shorting between portion of frame and leads. * * Portion of frame EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 09/12/2001