NEC's 4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE PS7801-1A 1-CH OPTICAL COUPLED MOSFET FEATURES DESCRIPTION • LOW C x R : C x R = 12.6 pF • Ω NEC's PS7801-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the output side. • LOW OUTPUT CAPACITANCE COUT = 1.2 pF An ultra small ßat-lead package has been provided which realizes a reduction in mounting area about 50% compared with the PS72xx series. • 1 CHANNEL TYPE: 1a output • DESIGNED FOR AC/DC SWITCHING LINE CHANGER It is suitable for high frequency signal control, due to its low C x R, low on-state resistance, and low off-state leakage current. • ULTRA SMALL FLAT-LEAD PACKAGE: 4.2 (L) X 2.5 (W) X 1.85 (H) mm • LOW OFFSET VOLTAGE • ORDERING NUMBER OF TAPING PRODUCT: PS7801-1A-F3, F4 (3 500 pcs/reel) APPLICATIONS • MEASUREMENT EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER SYMBOLS Diode MOS FET Coupled PS7801-1A PARAMETERS VF Forward Voltage, IF = 5 mA IR Reverse Current, VR = 5 V MIN TYP MAX UNITS 1.1 1.4 V 5.0 A 1 nA 2.0 mA ILOFF Off-State Leakage Current, VD = 40 V 0.1 Cout Output Capacitance, VD = 0 V, f = 1 MHz 1.2 IFon LED On-state Current IL = 100 mA RON1 On-State Resistance, IF = 5 mA, IL = 10 mA 10.5 14 RON2 On-State Resistance, IF = 5 mA, IL = 100 mAt ≤ 10 ms 11.5 15 pF tON Turn-on Time, IF = 5 mA, VO = 5 V, RL = 500 , PW ≥ 10 ms 0.02 0.5 ms tOFF Turn-off Time, IF = 5 mA, VO = 5 V, RL = 500 , PW ≥ 10 ms 0.15 1.0 ms RI-O Isolation Resistance, VI-O = 0.5 k VDC CI-O Isolation Capacitance, V = 0 V, f = 1 MHz 109 0.3 pF 1. Test Circuit for Switching Time IF VL Pulse Input Input 50% 0 VO = 5 V 90% Vo monitor Input monitor Output Rin RL 10% ton toff 2. The turn-on time and turn-off time are speciÞed as input-pulse width ≥ 10 ms. Please note that when the device operates with an input-pulse of under 10 ms, the turn-on time and turn-off time will increase. California Eastern Laboratories PS7801-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) mA V mW A V mA mA mW V mW °C °C 1.27 0.8 0.6 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 s, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25ºC, RH = 60% between input and output 24-R0.1 ORDERING INFORMATION PART NUMBER PS7801-A-F3 PACKAGE PACKING STYLE 4-PIN SSOP Embossed Tape 3 500 pcs PS7801-A-F4 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER IF VF (TA = 25°C) UNITS MIN TYP LED Operating Current IF 2 5 LED Off Voltage VF 0 MAX 20 0.5 OUTLINE DIMENSIONS (Units in mm) 2.5±0.3 4 0.2 MAX. TOP VIEW 3 0.2 ±0.1 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 3.6 N 1 1 2 0.15 0.36 +0.1 -0.05 1.85±0.05 4.8 MAX. 0.4±0.1 0.2±0.1 1.27 3 +0.3 -0.4 4.2 ±0.2 4 2 5.3 VR PD IFP VL IL ILP PD Viso PT TA TSTG (Units in mm) UNITS 4.4 RATINGS (0.35) PARAMETERS Forward Current (DC) 50 Reverse Voltage 5 Power Dissipation 50 Peak Forward Current2 1 Break Down Voltage 40 Continuous Load Current 100 Pulse Load Current3 200 Power Dissipation 250 Isolation Voltage4 500 Total Power Dissipation 300 Operating Ambient Temp. -40 to +85 Storage Temperature -40 to +100 3.6 Output Input SYMBOLS IF RECOMMENDED MOUNT PAD DIMENSIONS PS7801-1A TYPICAL CHARACTERISTICS (TA = 25ºC) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 150 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 85 100 50 0 -25 100 0 25 75 85 50 100 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 5.0 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1 mA 1.0 0.8 -25 0 25 50 75 Output Capacitance, Cout (pF) Forward Voltage, VF (mA) f = 1 MHz 4.0 3.0 2.0 1.0 0 100 10 -8 10 -9 10 -10 10 -11 10 -12 10 -13 30 40 50 100 -2.0 -1.0 0 1.0 -100 -200 0 20 40 60 80 Ambient Temperature, TA (ºC) 60 IF = 5 mA 200 VD = 40 V Load Current, IL (mA) Off-state Leakage, Current IF (mA) -7 20 LOAD CURRENT vs. LOAD VOLTAGE OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10 10 Applied Voltage, VD (V) Ambient Temperature, TA (ºC) 100 Load Voltage, VL (V) 2.0 PS7801-1A TYPICAL CHARACTERISTICS (TA = 25ºC) ON-STATE RESISTANCE DISTRIBUTION NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 60 Normalized to 1.0 at TA = 25ºC, IF = 5 mA IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Maximum Load Current, IL (mA) Normalized On-state Resistance, Ron 3.0 n = 50 pcs, IF = 5 mA IL = 10 mA 50 40 30 20 10 0 100 9.5 10.0 10.5 11.0 TURN-ON TIME vs. FORWARD CURRENT TURN-ON TIME vs. FORWARD CURRENT 0.5 0.10 VO = 5 V, RL = 500 Ω 0.4 0.08 Turn-off Time, toff (ms) Turn-on Time, ton (ms) VO = 5 V, RL = 500 Ω 0.08 0.06 0.3 0.2 0.1 0.02 0 5 10 15 20 25 0 30 5 10 15 20 25 Forward Current, IF (mA) Forward Current, IF (mA) TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 60 60 n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω 50 40 30 20 10 n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω 50 Number (pcs) Number (pcs) 11.5 On-state Resistance, Ron ( ) Ambient Temperature, TA (ºC) 40 30 20 10 0 0.01 0.02 0.03 0.04 Turn-on Time, Ton (ms) 0.05 0 0.05 0.10 0.15 0.20 Turn-off Time, toff (ms) 0.25 30 PS7801-1A TYPICAL CHARACTERISTICS (TA = 25ºC) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 ºC 2.5 VO = 5 V, RL = 500 Ω Normalized Turn-off Time, toff Normalized Turn-on Time, ton 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature, TA (ºC) 100 Normalized to 1.0 at TA = 25 ºC, IF = 5 mA VO = 5 V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature, TA (ºC) 100 PS7801-1A TAPING SPECIFICATIONS (Units in mm) 4.0±0.1 2.9 MAX 12.0±0.2 5.5±0.05 1.5 +0.1 -0 5.3±0.1 2.0±0.05 1.75±0.1 Outline and Dimensions (Tape) 0.3 1.55±0.05 2.4±0.1 2.9±0.1 4.0±0.1 Tape Direction PS7801-1-F3 N N N N N N N N PS7801-1-F4 Outline and Dimensions (Reel) R 1.0 ∅21.0±0.8 ∅13.0±0.2 2.0±0.5 ∅13.0±0.2 ∅330±2.0 ∅100±1.0 2.0±0.5 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel 11.9 to 15.4 Outer edge of flange PS7801-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260 ûC (package surface temperature) • Time of Peak reflow temperature 10 seconds or less • Time of temperature higher than 220 ˚C 60 seconds or less • Time to preheat temperature from 120 to 180 ˚C 120±30 s • Number of reflows Three • Flux Rosin ßux containing small amount of chlorine (The ßux with a max. chlorine content of 0.2 Wt % is recommended.) Package Surface Temperatire T (ºC) Recommended Temperature Profile of Infrared Reflow (heating) t0 10 s 260 ºC MAX. 220 ºC to 60 s 180 ºC 120 ºC 120±30 s (preheating) (2) Wave soldering Time (s) • Temperature 260 ûC or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120ûC or below (package surface temperature) • Number of times One • Flux Rosin ßux containing small amount of chlorine (The ßux with a max. chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual ßux with freon-based and chlorine-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 03/16/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.