Solid State Relay OCMOS FET PS7342-1A,PS7342L-1A 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7342-1A and PS7342L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7342L-1A has a surface mount type lead. FEATURES • High isolation voltage (BV = 3 750 Vr.m.s.) • 1 channel type (1 a output) • Low LED Operating Current (IF = 2 mA) • Designed for AC/DC switching line changer • Small package (6-pin DIP) • Low offset voltage • PS7342L-1A: Surface mount type • UL approved: File No. E72422 (S) • BSI approved: No. 8252/8253 • CSA approved: No. CA 101391 APPLICATIONS • Exchange equipment • Measurement equipment • FA/OA equipment Document No. PN10309EJ01V1DS (1st edition) (Previous No. P11566EJ6V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7342-1A,PS7342L-1A PACKAGE DIMENSIONS (in millimeters) PS7342-1A TOP VIEW 9.25±0.5 6 5 4 1 2 3 1. 2. 3. 4. 5. 6. LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 7.62 6.5±0.5 0.5±0.1 1.34±0.1 0.25 M 0 to 15˚ 2.54 PS7342L-1A 9.25±0.5 TOP VIEW 6 5 4 1 2 3 1. 2. 3. 4. 5. 6. 6.5±0.5 1.34±0.1 0.25 M 2 0.9±0.25 2.54 9.60±0.4 Data Sheet PN10309EJ01V1DS LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain PS7342-1A,PS7342L-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7342-1A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7342L-1A Application Part Number *1 PS7342-1A PS7342L-1A PS7342L-1A-E3 Embossed Tape 1 000 pcs/reel PS7342L-1A-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7342-1A-A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7342L-1A-A PS7342L-1A-E3-A Application Part Number *1 PS7342-1A PS7342L-1A Embossed Tape 1 000 pcs/reel PS7342L-1A-E4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10309EJ01V1DS 3 PS7342-1A,PS7342L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 400 V IL 200 mA Power Dissipation Peak Forward Current MOS FET *1 Break Down Voltage Continuous Load Current Connection A *2 Pulse Load Current Connection B 250 Connection C 400 *3 ILP 400 mA PD 560 mW BV 3 750 Vr.m.s. Total Power Dissipation PT 610 mW Operating Ambient Temperature TA 40 to +85 C Storage Temperature Tstg 40 to +125 C (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 s, Duty Cycle = 1 % *2 Conditions: IF 2 mA. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) – 4 6 5 4 6 5 IL 4 IL IL L L IL + IL – + VL (DC) + VL (DC) – *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN10309EJ01V1DS PS7342-1A,PS7342L-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode MOS FET Coupled Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 A 1.0 A Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage Current ILoff VD = 400 V 0.03 Output Capacitance Cout VD = 0 V, f = 1 MHz 225 LED On-state Current IFon IL = 200 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA Ron2 IF = 10 mA, IL = 200 mA, t 2.0 Turn-on Time ton IF = 10 mA, VO = 5 V, RL = 500 Turn-off Time *1 toff PW , 10 ms RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 6 10 1.2 2.5 0.06 0.2 mA 10 ms *1 Isolation Resistance pF ms 9 10 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton Data Sheet PN10309EJ01V1DS toff 5 PS7342-1A,PS7342L-1A TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 MAXIMUM LORD CURRENT vs. AMBIENT TEMPERATURE 300 80 200 60 40 100 20 0 –25 0 25 7585 50 100 0 –25 0 25 75 85 50 Ambient Temperature T A (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.8 100 250 f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.6 1.4 200 150 1.2 100 1.0 50 0.8 –25 10 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature T A (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LORD CURRENT vs. LORD VOLTAGE –5 300 IF = 10 mA TA = 85 ˚C 200 10–6 100 10–7 –1.5 25 ˚C –1.0 –0.5 0 0.5 –100 10–8 –200 10–9 0 100 200 300 400 500 Load Voltage VL (V) Applied Voltage VD (V) 6 –300 Data Sheet PN10309EJ01V1DS 1.0 1.5 PS7342-1A,PS7342L-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 3.0 30 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 10 mA 2.5 2.0 20 1.5 15 1.0 10 0.5 5 0.0 –25 0 25 50 75 100 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 0 5.6 5.8 6.0 6.2 6.4 Ambient Temperature TA (˚C) On-state Resistance Ron ( ) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 6 0.6 VO = 5 V VO = 5 V 5 0.5 4 0.4 3 0.3 2 0.2 1 0.1 0 5 10 15 20 25 30 0 5 Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 15 20 25 30 TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 15 10 10 5 5 0.8 1.0 1.2 1.4 1.6 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 0 10 Forward Current IF (mA) 0 Turn-on Time ton (ms) 0.02 0.04 0.06 0.08 0.10 Turn-off Time toff (ms) Data Sheet PN10309EJ01V1DS 7 PS7342-1A,PS7342L-1A NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 3.0 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 –25 0 25 50 75 100 0.0 –25 Ambient Temperature TA (˚C) 0 25 50 75 Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. 8 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 Data Sheet PN10309EJ01V1DS 100 PS7342-1A,PS7342L-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.5 +0.1 –0 4.5 MAX. 10.4±0.1 1.55±0.1 12.0±0.1 4.0±0.1 0.3 Tape Direction PS7342L-1A-E3 PS7342L-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel Data Sheet PN10309EJ01V1DS 15.9 to 19.4 Outer edge of flange 9 PS7342-1A,PS7342L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260 C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220 C 60 seconds or less • Time to preheat temperature from 120 to 180 C 120 30 s • Number of reflows Two • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260 C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120 C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10309EJ01V1DS