PRELIMINARY DATA SHEET CURRENT LIMIT TYPE 4 PIN SOP 400 V 1-CH OCMOS FET PS7241C-1A FEATURES DESCRIPTION • LIMIT CURRENT: ILMT = 155 to 210 mA The PS7241C-1A is a solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs including current control circuit on the output side. The currrent control circuit of the OCMOS FET protects this device from thermal breakdown and output circuit. • SMALL AND THIN PACKAGE: 4 pin SOP, Height = 2.1 mm • 1 CHANNEL TYPE: 1a output It is suitable for analog signal control because of its low offset and high linearity. • LOW LED OPERATING CURRENT: IF = 2 mA • DESIGNED FOR AC/DC SWITCHING LINE CHANGER APPLICATIONS • LOW OFFSET VOLTAGE • LAPTOP PC, PDA • SURFACE MOUNT AVAILABLE: PS7241C-1A-E3, E4, F3, F4 • MODEM CARD • TELEPHONE, FAX • MEASUREMENT EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER Coupled MOS Diode FET SYMBOLS PS7241C-1A PARAMETERS UNITS VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA ILOFF Off-State Leakage Current, VD = 400 V µA COUT Output Capacitance, VD = 0 V, f = 1 MHz pF mA MIN TYP MAX 1.2 1.4 5.0 1.0 65 IFon LED On-State Current, IL = 120 mA Ron1 Ron2 On-state Resistance, IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA Ω Ω 28 24 35 30 tON tOFF Turn-on Time1, Turn-off Time1 ms ms 0.5 0.07 2.0 0.2 RI-O Isolation Resistance, VI-O = 1.0 kVDC CI-O Isolation Capacitance, V = 0 V, f = 1 MHz pF ILMT Limit Current, IF = 10 mA, VL = 6 V, t = 5 ms mA IF = 10 mA, VO = 5 V, PW ≥ 10 ms Ω Note: 1. Test Circuit for Switching Time 2.0 109 0.5 155 180 210 PS7241C-1A IF Pulse Input VL Input 50% 4 3 1 2 0 Input Monitor VO Monitor VO = 5 V 90% Output Rin RL 10% ton toff California Eastern Laboratories PS7241C-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PD Coupled BV PT TA TSTG PARAMETERS UNITS RATINGS mA V mW A 50 5.0 50 1 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) PART NUMBER Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current2 Breakdown Voltage V 400 Continuous Load Current Pulse Load Current3 (AC/DC connection) Power Dissipation mA mA 120 120 mW 300 Isolation Voltage4 Total Power Dissipation Operating Ambient Temp. Storage Temperature Vr.m.s. mW °C °C 1500 350 -40 to +80 -40 to +100 SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage PS7241C-1A UNITS mA V MIN TYP MAX 2 10 20 0 0.5 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) TOP VIEW 4.0±0.5 4 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 2 1 7.0±0.3 +0.08 2.05 -0.05 4.4 +0.10 0.15 -0.05 2.0 +0.10 +0.08 0.05 -0.05 2.54 0.4 -0.05 0.25 M 0.5±0.3 EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 07/27/2001