PRELIMINARY DATA SHEET Ω LOW ON-STATE 6-PIN DIP, 20Ω PS7341A-1B RESISTANCE 100 pF LOW OUTPUT PS7341AL-1B CAPACITANCE 1-ch OPTICAL COUPLED MOS FET FEATURES DESCRIPTION • HIGH ISOLATION VOLTAGE BV = 3,750 Vr.m.s. The PS7341A-1B and PS7341AL-1B are solid state relays containing a GaAs LEDs on the light emitting side (input side) and normally close (N.C.) contact MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. • 1 CHANNEL TYPE 1 B output • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE 6 pin DIP • LOW OUTPUT CAPACITANCE Cout = 100 pF TYP APPLICATIONS • LOW ON-STATE RESISTANCE Ron2 = 20 Ω TYP • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • LOW LED OPERATING CURRENT IF = 2 mA • FA/OA EQUIPMENT • LOW OFFSET VOLTAGE • SURFACE MOUNT TYPE LEAD AVAILABLE PS7341AL-1B ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Coupled MOS Diode FET SYMBOLS PARAMETERS PS7341A-1B, PS7341AL-1B UNITS MIN TYP MAX 1.2 1.4 VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA 5.0 ILOFF Off-State Leakage Current, IF = 10 mA, VD = 400 V µA 10 COUT Output Capacitance, IF = 10 mA, VD = 0 V, f = 1 MHz pF 100 RON1 On-State Resistance, IF = 0 mA, IL = 10 mA Ω 26 RON2 On-State Resistance, IF = 0 mA, IL = 120 mA, t ≤ 10 ms Ω 20 IF = 10 mA, VO = 5 V, PW ≥ 10 ms tON Turn-On Time1 tOFF Turn-Off Time1 ms Rl-O Isolation Resistance, VI-O = 1.0 kVDC Ω Cl-O Isolation Capacitance, V = 0 V, f = 1 MHz pF ms 35 30 0.2 1.5 109 1.1 Notes: 1. Test Circuit for switching Time PS7341A-1B, PS7341AL-1B IF Pulse Input VL Input 50% 0 Vo = 5 V Input monitor Vo monitor 90% Output 10% Rin RL tOFF tON California Eastern Laboratories PS7341A-1B, PS7341AL-1B ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS OUTLINE DIMENSIONS (Units in mm) RATINGS PS7341A-1B PS7341AL-1B PS7341A-1B 1. LED Anode 4. MOSFET Drain 2. LED Cathode 5. MOSFET Source Diode VR IF PD IFP Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current2 V mA mW A 5.0 50 50 1 V 400 3. NC 6. MOSFET Drain 9.25±0.5 (Top View) 6 5 4 1 2 3 MOSFET VL Break Down Voltage IL Continuous Load Current3 mA Connection A 120 Connection B 160 240 7.62 ILP Pulse Load Current4 Connection C mA 240 6.5±0.5 PD Power Dissipation mW 560 BV Isolation Voltage5 Vr.m.s. 3,750 PT Total Power Dissipation mW 610 TA Operating Ambient Temp. °C -40 to +85 Storage Temperature °C -40 to +125 4.15±0.3 3.5±0.3 Coupled TSTG 3.3±0.3 0.5±0.1 1.34 ± 0.1 0.25 M Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1% 3. Conditions: IF ≥ 2 mA. The following types of loaad connections are available. 1 2 3 Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 2.54 2.54 MAX PS7341AL-1B 6 5 4 6 5 1. LED Anode VL (AC/DC) IL L 3. NC + VL (DC) - L IL IL 9.25±0.5 MAX. + VL (DC) - L IL + IL 4 6. MOSFET Drain (Top View) 6 5 4 1 2 3 + VL (DC) L IL 4. MOSFET Drain 2. LED Cathode 5. MOSFET Source 4 6 5 4 6 5 0 to 15 ˚ IL 4. PW = 100 ms, 1 shot 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. 6.5±0.5 3.5±0.3 0.10 +0.10 -0.05 0.9±0.25 9.60±0.4 1.34 ± 0.1 0.25 M RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL PARAMETER IF LED Operating Current VF LED Off Voltage 2.54 UNITS MIN TYP MAX mA 2 V 0 10 EXCLUSIVE NORTH AMERICAN AGENT FOR 20 0.5 RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/27/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE