8 PIN DIP SOLID STATE RELAY PS7142-2A PS7142L-2A FEATURES DESCRIPTION • 2 CHANNEL TYPE (1 A + 1 A Output) PS7142-2A and PS7142L-2A are solid state relays containing GaAs LED on the light emitting side (input side) and MOSFETs on the output side. • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE (8 pin DIP) • LOW OFFSET VOLTAGE • PS7142L-2A: SURFACE MOUNT TYPE • UL BSI APPROVED APPLICATIONS • TELECOMMUNICATIONS EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Coupled Mosfet Diode SYMBOLS PARAMETERS PS7142-2A, PS7142L-2A UNITS MIN TYP MAX 1.2 1.4 VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA ILoff Off-State Leakage Current, VD = 400 V µA 0.05 5.0 1.0 Cout Output Capacitance, V = 0 V, f = 1 MHz pF/ch 140 Ron1 On-State Resistance, IF = 10 mA, IL = 10 mA Ω 7.5 Ron2 On-State Resistance, IF = 10 mA, IL = 200 mA Ω 7.0 10 0.5 2.0 0.03 0.2 ton Turn-On Time IF = 10 mA, VL = 5 V, RL = 500 Ω ms toff Turn-Off Time PW ≥ 10 ms ms Rl-O Isolation Resistance, Vin-out = 1.0 kVDC Cl-O Isolation Capacitance, V = 0 V, f = 1 MHz Ω pF/ch 12 109 1.1 California Eastern Laboratories PS7142-2A, PS7142L-2A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode VR IF PD PARAMETERS UNITS Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current2 IF (Peak) RATINGS PS7142-2A PS7142L-2A V mA mW/ch A 5 50 50 1 RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL PARAMETER UNITS MIN TYP MAX IF LED Operating Current VF LED Off Voltage mA 2 V 0 10 20 0.5 MOSFET VL Break Down Voltage IL Continuous Load Current V 400 mA PD 200 Power Dissipation mW/ch 375 BV Isolation Voltage3 VRMS 1500 PT Total Power Dissipation mW 850 Storage Temperature °C -40 to +100 Operating Ambient Temp. °C -40 to +80 Coupled TSTG TA Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS7142-2A PS7142L-2A 1. LED Anode 5. MOSFET 1. LED Anode 5. MOSFET 2. LED Cathode 6. MOSFET 2. LED Cathode 6. MOSFET 3. LED Anode 7. MOSFET 3. LED Anode 7. MOSFET 4. LED Cathode 8. MOSFET 4. LED Cathode 8. MOSFET 10.16 MAX. 10.16 MAX. 8 7 6 5 1 2 3 4 8 7 6 5 1 2 3 4 7.62 7.62 6.5±0.5 6.5±0.5 3.8 4.55 MAX MAX 3.8 MAX 0.05 to 0.2 0.9±0.25 9.60±0.4 2.8 MAX 0.65 1.34 ± 0.10 0.25 M 2.54 1.27 MAX 0 to 15 ˚ 1.34 ± 0.10 0.25 M 2.54 1.27 MAX PS7142-2A, PS7142L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 200 100 0 -25 100 25 0 75 80 50 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE 1.8 100 200 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1.0 1 mA 0.8 -25 0 25 50 75 Output Capacitance , Cout (pF) Forward Voltage, VF (V) f = 1 MHz 100 150 100 50 0 20 40 OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE 80 100 120 LOAD CURRENT vs. LOAD VOLTAGE 10-6 300 IF = 10 mA TA = 80°C 200 10 -7 10-8 Load Current, IL (mA) Off-State Leakage Current, ILoff (A) 60 Supply Voltage, VCC (V) Ambient Temperature, TA (°C) 25°C 10-9 100 -2.0 -1.0 0 1.0 -100 -200 10 -10 -300 0 100 200 300 400 Supply Voltage, VCC (V) 500 Load Voltage, VL (V) 2.0 PS7142-2A, PS7142L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) ON-STATE RESISTANCE DISTRIBUTION 3.0 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 20 15 10 5 0.5 0.0 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 Number (pcs) Normalized On-State Resistance, RON NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 0 -25 0 25 50 75 100 6.5 7.0 7.5 8.0 Ambient Temperature, TA (°C) On-State Resistance, RON (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 12 0.30 VL = 5 V, RL = 500 Ω 0.25 10 Turn-off Time, Toff (ms) Turn-on Time, Ton (ms) VL = 5V, RL = 500 kΩ 8 6 4 0.20 0.15 0.10 0.05 2 0 5 10 15 20 25 0 30 5 10 15 20 25 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 3.0 3.0 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 25 20 15 10 5 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 25 Number (pcs) Number (pcs) 8.5 20 15 10 5 0 0 0.3 0.4 0.5 0.6 Turn-on Time, Ton (ms) 0.7 0.03 0.04 Turn-off Time, Toff (ms) 30 PS7142-2A, PS7142L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VL = 5V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature, TA (°C) 100 Normalized Turn-off Time, Toff Normalized Turn-on Time, Ton 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VL = 5V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature, TA (°C) 100 PS7142-2A, PS7142L-2A TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) OUTLINE AND DIMENSIONS (REEL) 2.0 ± 0.1 4.0 ± 0.1 1.75 ± 0.1 4.3 ± 0.2 1.55 ± 0.1 2.0 ± 0.5 φ330 10.3 ± 0.1 16.0 ± 0.3 R1.0 φ80.0 ± 5.0 φ13.0 ± 0.5 7.5 ± 0.1 φ21.0 ± 0.8 0.3 1.55 ± 0.1 10.4 ± 0.1 12.0 ± 0.1 +2.0 16.4 -0.0 Notes: 1. Packing : 1000 pcs/reel TAPE DIRECTION PS7142L-2A-E3 PS7142L-2A-E4 PS7142-2A, PS7142L-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 ˚C (package surface temperature) • Time of temperature higher than 210 ˚C 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 120 to 160 ˚C 60 to 90 s (preheating) Time (s) Peak temperature 235˚ C or below (2) Dip soldering • Temperature 260 ˚C or below (molten solder temperature) • Time 10 seconds or less • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 8/99 DATA SUBJECT TO CHANGE WITHOUT NOTICE