1.5 GHz SILICON MMIC UPC2710T WIDE-BAND AMPLIFIER UPC2713T GAIN vs. FREQUENCY FEATURES • FREQUENCY RESPONSE: 1.5 GHz • SATURATED OUTPUT POWER: +13.5 (UPC2710T) • INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE • 5 V SINGLE SUPPLY VOLTAGE Gain, GS (dB) • HIGH GAIN: 33 dB (UPC2710T) • SUPER SMALL PACKAGE • TAPE AND REEL PACKAGING OPTION AVAILABLE Frequency, f (GHz) DESCRIPTION The UPC2710T and UPC2713T are Silicon Monolithic integrated circuits manufactured using the NESAT III process. These devices are suitable for applications which require high gain and wide-band operation. They are designed for low cost gain stages in cellular radios, GPS receivers, DBS tuners, PCN, and test/measurement equipment. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25 °C, f = 0.5 GHz, VCC = 5 V) PART NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS UPC2710T T06 UNITS MIN TYP UPC2713T T06 MAX MIN TYP MAX ICC Circuit Current (no signal) mA 16 22 29 9 12 15 GS Small Signal Gain dB 30 33 36.5 26 29 33 fU Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) GHz 0.7 1.0 0.9 1.2 ∆GS Gain Flatness, f = 0.1 ~ 0.6 GHz f = 0.1∼ 0.8 GHz PSAT Saturated Output Power dBm P1dB Output Power at 1dB Compression Point NF RLIN ±0.8 dB 11 13.5 dBm 7.5 Noise Figure dB 3.5 Input Return Loss dB 3 ±0.8 4 7 -4 5 6 3.2 10 13 RLOUT Output Return Loss dB 9 12 6 9 ISOL Isolation dB 34 39 35 40 ∆GT Gain -Temperature Coefficient dB/°C RTH Thermal Resistance (Junction to Ambient) °C/W -0.006 4.5 -0.016 200 200 California Eastern Laboratories UPC2710T, UPC2713T ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCC Supply Voltage V 6 PIN Input Power dBm +10 PT Power Dissipation mW 2802 RECOMMENDED OPERATING CONDITIONS SYMBOL TOP Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +150 VCC PARAMETER Supply Voltage UNITS MIN TYP MAX V 4.5 5.0 5.5 TEST CIRCUIT Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). * TYPICAL PERFORMANCE CURVES (TA = 25°C) * UPC2710T only CIRCUIT CURRENT vs. VOLTAGE Circuit Current, ICC (mA) Circuit Current, ICC (mA) CIRCUIT CURRENT vs. TEMPERATURE Supply Voltage, VCC (V) Operating Temperature, TOP (°C) UPC2713T NOISE FIGURE AND INSERTION GAIN vs. FREQUENCY Frequency, f (GHz) Noise Figure, NF (dB) Insertion Power Gain, GP (dB) Noise Figure, NF (dB) Insertion Power Gain, GP (dB) UPC2710T NOISE FIGURE AND INSERTION GAIN vs. FREQUENCY Frequency, f (GHz) UPC2710T, UPC2713T TYPICAL PERFORMANCE CURVES (TA = 25° C) UPC2713T RETURN LOSS vs. FREQUENCY Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) UPC2710T RETURN LOSS vs. FREQUENCY Frequency, f (GHz) Frequency, f (GHz) UPC2710T ISOLATION vs. FREQUENCY UPC2713T ISOLATION vs. FREQUENCY 0 Isolation, ISOL (dB) Isolation, ISOL (dB) VCC = 5.0V -10 -20 -30 -40 0.1 Frequency, f (GHz) 0.3 1.0 Frequency, f (GHz) UPC2710T POWER vs. FREQUENCY UPC2713T POWER vs. FREQUENCY Power (dBm) Power (dBm) X Frequency, f (GHz) X: Typical SSB Third Order Intercept Point Frequency, f (GHz) X: Typical SSB Third Order Intercept Point 3.0 UPC2710T, UPC2713T TYPICAL PERFORMANCE CURVES (TA = 25° C) UPC2710T OUTPUT POWER vs. INPUT POWER AND VOLTAGE Output Power, POUT (dBm) Output Power, POUT (dBm) UPC2713T OUTPUT POWER vs. INPUT POWER AND VOLTAGE Input Power, PIN (dBm) UPC2710T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE UPC2713T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE Output Power, POUT (dBm) Output Power, POUT (dBm) Input Power, PIN (dBm) Input Power, PIN (dBm) Noise Figure, NF (dB) NOISE FIGURE vs. FREQUENCY Frequency, f (GHz) Input Power, PIN (dBm) UPC2710T, UPC2713T TYPICAL SCATTERING PARAMETERS (TA = 25° C) UPC2710T VCC = 5 V, ICC = 22 mA S21 FREQUENCY (GHz) S11 MAG ANG MAG 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 0.322 0.346 0.383 0.429 0.465 0.486 0.487 0.468 0.423 0.392 0.349 0.301 0.257 0.217 0.184 -0.3 3.3 2.1 -1.7 -9.4 -17.8 -27.2 -36.5 -44.5 -50.3 -56.6 -61.0 -63.2 -63.5 -59.9 37.7 38.8 40.2 41.6 42.1 42.3 41.1 39.1 35.4 32.9 30.0 26.8 23.8 21.1 18.8 S12 ANG MAG ANG S22 MAG -5.9 -17.0 -28.0 -40.4 -54.1 -68.3 -83.2 -97.9 -111.7 -123.4 -135.5 -146.8 -156.8 -165.9 -174.2 0.013 0.012 0.009 0.009 0.012 0.013 0.013 0.013 0.013 0.014 0.014 0.015 0.016 0.016 0.017 17.1 19.8 22.5 25.1 27.8 30.5 33.1 35.8 38.5 41.2 43.9 46.6 49.2 51.6 54.5 0.200 0.208 0.231 0.258 0.273 0.305 0.319 0.320 0.297 0.260 0.240 0.216 0.192 0.173 0.155 K1 ANG -11.7 -15.4 -23.5 -34.2 -47.2 -60.9 -77.8 -96.2 -115.4 -128.2 -142.2 -156.3 -169.7 176.0 162.3 S21 (dB) 1.06 1.07 1.21 1.10 0.86 0.79 0.82 0.89 1.04 1.10 1.22 1.31 1.40 1.56 1.65 31.5 31.8 32.1 32.4 32.5 32.5 32.3 31.9 31.0 30.4 29.6 28.6 27.5 26.5 25.5 K1 S21 (dB) 3.07 3.17 2.77 2.78 2.78 2.41 2.39 2.13 2.15 2.23 2.12 2.24 2.47 2.68 2.77 2.81 2.92 3.02 3.15 3.23 26.8 26.9 26.9 27.0 27.0 27.1 27.1 27.2 27.2 27.0 26.7 26.3 25.5 24.9 23.9 23.0 22.0 21.1 20.1 19.4 UPC2713T VCC = 5 V, ICC = 12 mA FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 S11 MAG 0.350 0.290 0.243 0.207 0.185 0.176 0.161 0.148 0.127 0.111 0.097 0.095 0.098 0.110 0.129 0.145 0.161 0.179 0.191 0.197 S21 ANG -21.8 -33.1 -41.7 -47.3 -50.5 -54.0 -57.5 -60.2 -63.9 -62.9 -56.5 -48.2 -40.1 -35.7 -34.6 -36.2 -40.0 -44.7 -50.3 -56.1 S12 MAG ANG MAG ANG S22 MAG ANG 21.9 22.0 22.1 22.3 22.4 22.6 22.8 22.9 22.8 22.3 21.6 20.6 18.9 17.6 15.6 14.2 12.6 11.4 10.2 9.3 -8.1 -25.3 -37.3 -48.6 -60.0 -72.7 -85.7 -100.7 -114.8 -132.0 -147.6 -163.1 -177.8 168.3 154.8 142.7 130.5 120.9 110.1 100.8 0.006 0.006 0.007 0.007 0.007 0.008 0.008 0.009 0.009 0.009 0.010 0.010 0.010 0.010 0.011 0.012 0.013 0.014 0.015 0.016 25.6 24.9 23.7 22.4 21.6 20.1 19.0 18.3 17.2 16.4 15.7 14.4 13.1 12.0 11.8 11.2 10.8 9.8 7.5 5.5 0.286 0.298 0.313 0.327 0.336 0.348 0.359 0.366 0.366 0.359 0.343 0.320 0.291 0.263 0.234 0.208 0.185 0.164 0.148 0.137 Note: 1. K factor calculations: 2 2 2 K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 2 |S12 S21| -10.3 -16.1 -25.6 -35.2 -45.4 -56.9 -69.0 -82.9 -96.8 -111.8 -126.8 -142.3 -156.6 -171.7 174.3 160.8 147.1 132.6 119.5 107.4 UPC2710T, UPC2713T EQUIVALENT CIRCUIT UPC2713T UPC2710T LEAD CONNECTIONS PACKAGE OUTLINE (Units in mm) (Top View) UPC2710T/UPC2713T PACKAGE OUTLINE T06 (Bottom View) C1F +0.2 2.8 -0.3 +0.2 1.5 -0.1 3 0.95 4 1.9±0.2 2 0.95 5 1 6 2.9±0.2 +0.2 1.1 -0.1 1. INPUT 2. GND 3. GND -0.05 0.3 +0.10 Note: Package Markings: C1F - UPC2710T C1J - UPC2713T 4. OUTPUT 5. GND 6. VCC RECOMMENDED P.C.B. LAYOUT (Units in mm) 3.10 0.13±0.1 0.8 0 to 0.1 3 Note: All dimensions are typical unless otherwise noted. 4 2 ORDERING INFORMATION PART NUMBER QTY UPC2710T-E3 3K/Reel UPC2713T-E3 3K/Reel 5 1 Embossed Tape, 8 mm wide. 0.95 6 0.5 MIN 1.0 MIN 1.0 MIN EXCLUSIVE AGENT FOR NEC Corporation RF & MICROWAVE SEMICONDUCTOR PRODUCTS - U.S. & CANADA CALIFORNIA EASTERN LABORATORIES, INC · DATA SUBJECT TO CHANGE WITHOUT NOTICE Headquarters · 4590 Patrick Henry Drive · Santa Clara, CA 95054-1817 · (408) 988-3500 · Telex 34-6393/FAX (408) 988-0279