CEL UPC2711TB-E3

BIPOLAR ANALOG INTEGRATED CIRCUITS
UPC2711TB, UPC2712TB
5 V, SUPER MINIMOLD
SILICON MMIC WIDEBAND AMPLIFIER
TYPICAL PERFORMANCE CURVES
FEATURES
• HIGH DENSITY SURFACE MOUNTING:
6 pin super minimold or SOT- 363 package
GAIN vs. FREQUENCY
25
• SUPPLY VOLTAGE: VCC = 4.5 to 5.5 V
UPC2712TB
• WIDEBAND RESPONSE:
UPC2711TB: fu = 2.9 GHz TYP
UPC2712TB: fu = 2.6 GHz TYP
Gain, GP (dB)
20
• POWER GAIN:
UPC2711TB: GP = 13 dB TYP
UPC2712TB: GP = 20 dB TYP
15
UPC2711TB
10
DESCRIPTION
NEC's UPC2711TB and UPC2712TB are Silicon MMIC
Wideband Amplifiers manufactured using NEC's 20 GHz fT
NESATTM III silicon bipolar process. These devices are designed for use as buffer amps in DBS tuners. The UPC2711/
12TB are pin compatible and have comparable performance
as the larger UPC2711/12T, so they are suitable for use as a
replacement to help reduce system size. These IC's are
housed in a 6 pin super minimold or SOT-363 package.
5
0.5
1.0
1.5
2.0
2.5
3.0
Frequency, f (GHz)
NEC's stringent quality assurance and test procedure ensure
the highest reliability and performance.
ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 5.0 V, ZL = ZS = 50 W)
PART NUMBER
PACKAGE OUTLINE
SYMBOLS
PARAMETERS AND CONDITIONS
UPC2711TB
S06
UPC2712TB
S06
UNITS
MIN
TYP
MAX
MIN
TYP
MAX
ICC
Circuit Current (no signal)
mA
9
12
15
9
12
15
GP
Power Gain, f = 1 GHz
dB
11
13
16.5
18
20
23.5
fU
Upper Limit Operating Frequency
(The gain at fU is 3 dB down from the gain at 100 MHz)
GHz
2.7
∆GP
PO(SAT)
NF
Gain Flatness, f = 0.1 GHz to 2.5 GHz
Maximum Output Level, f = 1 GHz, PIN = 0 dBm
dBm
Noise Figure, f = 1 GHz
dB
Input Return Loss, f = 1 GHz
dB
RLOUT
Output Return Loss, f = 1 GHz
ISOL
Isolation, f = 1 GHz
RLIN
2.9
2.2
±0.8
dB
-2
+1
5
0
6.5
+3
4.5
20
25
9
12
dB
9
12
10
13
dB
25
30
28
33
The information in this document is subject to change without notice. Before using this document, please confirm
that this is the latest version.
Date Published: June 22, 2005
2.6
±0.8
6
UPC2711TB, UPC2712TB
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
SYMBOLS
PARAMETERS
RECOMMENDED OPERATING CONDITIONS
UNITS
RATINGS
SYMBOL
V
6
VCC
Supply Voltage
V
4.5
5.0
5.5
TOP
Operating Temperature
˚C
-40
+25
+85
VCC
Supply Voltage
PIN
Input Power
dBm
+10
PT
Total Power Dissipation2
mW
200
TOP
Operating Temperature
°C
-45 to +85
TSTG
Storage Temperature
°C
-55 to +150
PARAMETER
UNITS
MIN
TYP MAX
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage.
2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy
glass PWB (TA = +85°C).
PIN DESCRIPTION
Pin
No.
Pin
Name
1
Input
4
Applied
Voltage
(V)
Description
Internal Equivalent Circuit
Signal input pin. An internal matching
circuit, configured with resistors, enables
50 Ω connection over a wide bandwidth.
A multi-feedback circuit is designed to
cancel the deviations of hFE and resistance.
This pin must be coupled to the signal source
with a blocking capacitor.
Output
Signal output pin. An internal matching
circuit, configured with resistors, enables
50 Ω connection over a wide bandwidth.
This pin must be coupled to the output
load with a blocking capacitor.
6
VCC
4.5 to 5.5
Power supply pin. This pin should be
externally equipped with a bypass capacitor
to minimize ground impedance.
2
3
5
GND
0
Ground pin. This pin should be connected
to system ground with minimum inductance.
Ground pattern on the board should be
formed as wide as possible. All the ground
pins must be connected together with wide
ground pattern to minimize impedance
difference.
6
4
1
2
3
5
UPC2711TB, UPC2712TB
TYPICAL PERFORMANCE CURVES (TA = 25°C)
UPC2711TB
CURRENT vs. VOLTAGE
UPC2711TB
CURRENT vs. TEMPERATURE
20
20
18
18
16
16
Current, ICC (mA)
Current, ICC (mA)
VCC = 5.0 V
14
12
10
8
6
14
12
10
8
6
4
4
2
2
0
1
2
3
4
5
0
-60
6
-40
-20
0
40
60
Temperature, TA (°C)
UPC2711TB
GAIN AND NOISE FIGURE vs.
FREQUENCY AND VOLTAGE
UPC2711TB
GAIN vs. FREQUENCY AND
TEMPERATURE
100
15
TA = -40°C
VCC = 5.5 V
TA = +25°C
TA = +25°C
VCC = 5.0 V
15
VCC = 4.5 V
10
7
6
VCC = 5.5 V
5
TA = -40°C
Gain, GS (dB)
GS
Noise Figure, NF (dB)
8
TA = +85°C
TA = +25°C
10
5
0
VCC = 4.5 V
-5
0.1
NF
VCC = 5.0 V
4
0.3
1.0
VCC = 5.0 V
5
3.0
0.1
Frequency, f (GHz)
0.3
1.0
3.0
Frequency, f (GHz)
UPC2711TB
INPUT RETURN LOSS AND
OUTPUT RETURN LOSS vs. FREQUENCY
UPC2711TB
ISOLATION vs. FREQUENCY
0
0
VCC = 5.0 V
Input Return Loss, RLIN (dB)
Output Return Loss, RLOUT (dB)
VCC = 5.0 V
-10
Isolation, ISOL, (dB)
80
Voltage, VCC (V)
20
Gain, GS (dB)
20
-20
-30
-40
-50
-10
RLOUT
-20
RLIN
-30
-40
0.1
0.3
1.0
Frequency, f (GHz)
3.0
0.1
0.3
1.0
Frequency, f (GHz)
3.0
UPC2711TB, UPC2712TB
TYPICAL PERFORMANCE CURVES (TA = 25°C)
UPC2711TB
OUTPUT POWER vs.
INPUT POWER VOLTAGE
UPC2711TB
OUTPUT POWER vs.
INPUT POWER AND TEMPERATURE
5
5
VCC = 5.0 V
f = 1.0 GHz
5.5 V
Output Power, POUT (dBm)
Output Power, POUT (dBm)
f = 1.0 GHz
0
VCC = 5.0 V
-5
4.5 V
-10
-15
-20
-35
-30
-25
-20
-15
-10
-5
0
-10
-15
-30
-25
-20
-15
-10
-5
0
UPC2711TB
OUTPUT POWER vs.
INPUT POWER AND FREQUENCY
5
5
VCC = 5.0 V
5.5 V
Output Power, POUT (dBm)
Output Power, POUT (dBm)
-20°C
UPC2711TB
OUTPUT POWER vs.
INPUT POWER AND VOLTAGE
0
VCC = 5.0 V
-5
4.5 V
-10
-15
-30
-25
-20
-15
-10
-5
0
f = 0.5 GHz
0
f = 1.0 GHz
-5
f = 2.0 GHz
f = 2.9 GHz
-10
-15
-20
-35
5
-30
-25
-20
-15
-10
-5
0
Input Power, PIN (dBm)
Input Power, PIN (dBm)
UPC2711TB
SATURATED OUTPUT POWER vs.
FREQUENCY AND VOLTAGE
UPC2711TB
3RD ORDER INTERMODULATION
DISTORTION vs. OUTPUT POWER
AND VOLTAGE
10
5
0
5.5 V
PIN = 0 dBm
3rd Order Intermodulation Distortion,
IM3 (dBc)
Saturated Output Power, PSAT (dBm)
-5
Input Power, PIN (dBm)
f = 2.0 GHz
VCC = 5.0 V
5
0
4.5 V
-5
-10
-15
0.1
TA = +25°C
-40°C
Input Power, PIN (dBm)
5
-20
-35
0
-20
-35
5
+85°C
0.3
1.0
Frequency, f (GHz)
3.0
f1 = 1.000 GHz
f2 = 1.002 GHz
-10
-20
VCC = 5.0 V
-30
4.5 V
-40
5.5 V
-50
-20 -18 -16
-14 -12 -10
-8
-6
-4
-2
0
Output Power of Each Tone, POUT(each) (dBm)
UPC2711TB, UPC2712TB
TYPICAL PERFORMANCE CURVES (TA = 25°C)
UPC2712TB
CURRENT vs. VOLTAGE
UPC2712TB
CURRENT vs. TEMPERATURE
20
20
18
18
16
16
14
14
Current, ICC (mA)
Current, ICC (mA)
VCC = 5.0 V
12
10
8
6
12
10
8
6
4
4
2
2
0
1
2
3
4
5
0
-60
6
-40
-20
0
20
40
60
80
100
Voltage, VCC (V)
Temperature, TA (°C)
UPC2712TB
GAIN AND NOISE FIGURE vs.
FREQUENCY AND VOLTAGE
UPC2712TB
GAIN vs.
FREQUENCY AND TEMPERATURE
25
30
VCC = 5.0 V
10
Gain, GS (dB)
GS
20
8
VCC = 4.5 V
15
6
NF
10
VCC = 5.5 V
5
0.1
Gain, GS (dB)
VCC = 5.5 V
VCC = 5.0 V
Noise Figure, NF (dB)
25
+25°C
20
TA = +85°C
4
VCC = 5.0 V
15
2
0.3
-40°C
1.0
3.0
0.3
0.1
1.0
Frequency, f (GHz)
Frequency, f (GHz)
UPC2712TB
ISOLATION vs. FREQUENCY
UPC2712TB
INPUT RETURN LOSS AND OUTPUT
RETURN LOSS vs. FREQUENCY
0
0
VCC = 5.0 V
nput Return Loss, RLIN (dB)
Output Return Loss, RLOUT (dB)
VCC = 5.0 V
-10
Isolation, ISOL, (dB)
3.0
-20
-30
-40
-50
-10
RLIN
-20
RLOUT
-30
-40
0.1
0.3
1.0
Frequency, f (GHz)
3.0
0.1
0.3
1.0
Frequency, f (GHz)
3.0
UPC2711TB, UPC2712TB
TYPICAL PERFORMANCE CURVES (TA = 25°C)
UPC2712TB
OUTPUT POWER vs.
INPUT POWER VOLTAGE
UPC2712TB
OUTPUT POWER vs.
INPUT POWER AND TEMPERATURE
10
10
VCC = 5.0 V
f = 1.0 GHz
f = 1.0 GHz
5.5 V
Output Power, POUT (dBm)
Output Power, POUT (dBm)
+85°C
5
5
0
VCC = 5.0 V
-5
4.5 V
-10
-15
0
TA = +25°C
-5
-40°C
-10
-15
-20
-20
-25
-45 -40
-35 -30 -25
-20 -15
-10
-5
0
-25
-40
5
-35
-30
-25
-20
-15
0
UPC2712TB
OUTPUT POWER vs.
INPUT POWER AND VOLTAGE
UPC2712TB
OUTPUT POWER vs.
INPUT POWER AND FREQUENCY
5
10
f = 2.0 GHz
VCC = 5.0 V
f = 0.5 GHz
5.5 V
5
Output Power, POUT (dBm)
5
Output Power, POUT (dBm)
-5
Input Power, PIN (dBm)
10
0
-5
4.5 V
VCC = 5.0 V
-10
-15
-20
0
f = 1.0 GHz
-5
f = 2.0 GHz
-10
-15
-20
-25
-40
-35
-30
-25
-20
-15
-10
-5
0
-25
-45 -40
5
-35 -30 -25
-20 -15
-10
-5
0
Input Power, PIN (dBm)
Input Power, PIN (dBm)
UPC2712TB
SATURATED OUTPUT POWER vs.
FREQUENCY AND VOLTAGE
UPC2712TB
3RD ORDER INTERMODULATION
DISTORTION vs. OUTPUT POWER
AND VOLTAGE
10
5
0
5.5 V
PIN = 2 dBm
3rd Order Intermodulation Distortion,
IM3 (dBc)
Saturated Output Power, PSAT (dBm)
-10
Input Power, PIN (dBm)
VCC = 5.0 V
5
4.5 V
0
-5
-10
0.1
0.3
1.0
Frequency, f (GHz)
3.0
f1 = 1.000 GHz
f2 = 1.002 GHz
-10
-20
-30
VCC = 5.0 V
4.5 V
-40
5.5 V
-50
-16
-14
-12
-10
-8
-6
-4
-2
0
Output Power of Each Tone, POUT(each) (dBm)
UPC2711TB, UPC2712TB
TYPICAL SCATTERING PARAMETERS (TA = 25°C)
UPC2711TB
VCC = 5 V, ICC = 13.8 mA
FREQUENCY
(MHz)
100.00
200.00
300.00
400.00
500.00
600.00
700.00
800.00
900.00
1000.00
1100.00
1200.00
1300.00
1400.00
1500.00
1600.00
1700.00
1800.00
1900.00
2000.00
2100.00
2200.00
2300.00
2400.00
2500.00
2600.00
2700.00
2800.00
2900.00
3000.00
S11
S21
MAG
ANG
0.085
0.086
0.098
0.081
0.066
0.041
0.053
0.070
0.098
0.101
0.090
0.060
0.019
0.023
0.062
0.087
0.113
0.126
0.154
0.178
0.212
0.232
0.246
0.248
0.240
0.238
0.240
0.262
0.285
0.316
-22.40
-25.00
-29.20
-29.40
-33.90
-54.50
-104.30
-119.70
-121.90
-112.50
-108.50
-95.60
-79.20
54.80
80.70
80.40
78.70
72.00
63.50
59.00
54.20
55.20
53.80
53.60
49.20
43.70
36.20
31.70
28.80
29.70
MAG
4.447
4.468
4.491
4.510
4.540
4.572
4.624
4.664
4.729
4.781
4.843
4.945
4.999
5.062
5.114
5.142
5.160
5.146
5.123
5.113
5.063
5.006
4.954
4.865
4.783
4.664
4.529
4.384
4.255
4.117
S12
ANG
MAG
-14.90
-30.10
-44.90
-60.30
-74.90
-90.20
-105.30
-120.70
-136.10
-152.00
-167.90
175.80
159.50
143.00
126.40
109.50
92.70
75.40
58.00
41.30
24.00
6.90
-10.40
-27.70
-45.00
-62.30
-79.60
-96.60
-113.10
-129.60
0.035
0.035
0.034
0.033
0.033
0.033
0.032
0.031
0.032
0.031
0.031
0.029
0.029
0.028
0.029
0.029
0.029
0.030
0.032
0.035
0.036
0.038
0.041
0.045
0.048
0.049
0.052
0.054
0.056
0.057
S22
ANG
MAG
-12.70
-23.00
-32.10
-42.50
-50.10
-59.60
-69.30
-78.40
-86.60
-94.90
-103.90
-111.00
-120.20
-128.90
-133.10
-140.90
-146.20
-151.40
-159.70
-168.30
-175.70
175.20
165.20
155.30
143.60
131.20
119.80
108.70
95.50
83.60
0.113
0.119
0.136
0.142
0.156
0.161
0.161
0.176
0.192
0.228
0.256
0.290
0.308
0.322
0.327
0.333
0.344
0.356
0.371
0.378
0.383
0.378
0.367
0.359
0.356
0.359
0.366
0.374
0.372
0.361
K
ANG
-3.10
1.20
1.60
6.50
10.10
12.70
8.80
6.20
1.90
0.10
-0.60
-1.10
-0.30
-1.40
-2.20
-4.80
-7.00
-9.70
-11.10
-12.00
-12.80
-13.60
-16.10
-18.00
-21.10
-23.60
-26.20
-28.60
-31.10
-35.00
3.18
3.21
3.23
3.34
3.32
3.34
3.33
3.36
3.27
3.29
3.15
3.24
3.16
3.18
3.08
3.07
3.02
2.88
2.70
2.51
2.39
2.27
2.13
1.99
1.88
1.85
1.76
1.72
1.68
1.69
UPC2711TB, UPC2712TB
TYPICAL SCATTERING PARAMETERS (TA = 25°C)
UPC2712TB
VCC = 5 V, ICC = 13.9 mA
FREQUENCY
(MHz)
100.00
200.00
300.00
400.00
500.00
600.00
700.00
800.00
900.00
1000.00
1100.00
1200.00
1300.00
1400.00
1500.00
1600.00
1700.00
1800.00
1900.00
2000.00
2100.00
2200.00
2300.00
2400.00
2500.00
2600.00
2700.00
2800.00
2900.00
3000.00
S11
MAG
0.303
0.291
0.295
0.276
0.265
0.243
0.222
0.219
0.230
0.267
0.290
0.316
0.317
0.314
0.296
0.290
0.278
0.282
0.284
0.280
0.273
0.244
0.222
0.189
0.177
0.164
0.158
0.143
0.128
0.111
S21
ANG
-8.10
-10.10
-11.80
-11.30
-11.00
-12.30
-20.30
-25.40
-33.90
-35.50
-35.50
-33.20
-30.60
-29.40
-28.10
-29.40
-31.10
-34.90
-35.50
-36.60
-36.00
-38.20
-40.00
-45.70
-52.90
-57.40
-59.60
-53.90
-44.30
-22.20
MAG
8.864
8.827
8.936
9.044
9.051
9.096
9.089
9.080
9.096
9.044
9.197
9.421
9.524
9.512
9.574
9.598
9.480
9.372
9.193
9.198
9.011
8.784
8.717
8.388
8.217
7.890
7.597
7.313
7.078
6.086
S12
ANG
MAG
-16.70
-33.50
-49.50
-67.60
-82.20
-98.80
-115.20
-131.50
-147.60
-164.20
179.50
162.40
144.90
126.60
109.10
91.10
72.90
54.30
35.60
18.40
0.10
-17.90
-35.10
-52.90
-70.10
-87.40
-104.60
-121.40
-138.40
-154.90
0.023
0.023
0.022
0.023
0.023
0.023
0.023
0.023
0.023
0.024
0.024
0.024
0.024
0.026
0.026
0.027
0.028
0.029
0.030
0.031
0.033
0.033
0.034
0.036
0.037
0.039
0.041
0.041
0.043
0.046
S22
ANG
MAG
-11.40
-19.20
-25.50
-34.60
-42.80
-50.00
-59.80
-66.20
-73.00
-82.90
-89.50
-98.40
-107.00
-115.70
-122.30
-133.20
-139.40
-148.10
-157.60
-167.40
-175.10
176.50
164.80
154.80
143.50
133.30
123.80
114.00
101.40
90.20
0.043
0.055
0.078
0.095
0.112
0.120
0.120
0.136
0.155
0.189
0.212
0.240
0.245
0.248
0.236
0.231
0.221
0.215
0.199
0.170
0.134
0.090
0.050
0.025
0.039
0.071
0.099
0.131
0.149
0.157
K
ANG
2.30
11.50
8.50
13.40
13.60
11.10
1.70
-6.00
-14.40
-17.50
-19.90
-21.40
-23.20
-27.10
-31.80
-38.00
-43.80
-49.80
-53.00
-55.30
-56.20
-55.20
-53.70
1.80
33.40
39.30
34.30
26.00
22.80
19.40
2.32
2.35
2.38
2.33
2.37
2.35
2.37
2.38
2.39
2.26
2.12
2.02
1.94
1.82
1.78
1.74
1.72
1.69
1.70
1.69
1.68
1.74
1.74
1.75
1.74
1.72
1.70
1.72
1.70
1.70
UPC2711TB, UPC2712TB
PIN CONNECTIONS
OUTLINE DIMENSIONS (Units in mm)
3
1.25±0.1
C1G
0.65 3
1.3
0.65 2
4
0.2 +0.1
-0
2
1
5
1
6
4
4
3
5
5
2
6
6
1
Marking is an example of UPC2711TB
1. Input 4. Output
2. GND 5. GND
3. GND 6. VCC
DOT ON
BACK SIDE
0.9 ± 0.1
C1G
2.1±0.1
2.0±0.2
(Bottom View)
(Top View)
PACKAGE OUTLINE S06
0.7
+0.1
0.15 -0.5
0 ~0.1
ORDERING INFORMATION (Solder Contains Lead)
TEST CIRCUIT
VCC
1000 pF
PART NUMBER
MARKING
QTY
UPC2711TB-E3
C1G
3K/reel
UPC2712TB-E3
C1H
3K/reel
Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated
side of tape.
6
50 Ω
1
IN
1000 pF
50 Ω
4
2, 3, 5
OUT
1000 pF
ORDERING INFORMATION (Pb-Free)
PART NUMBER
MARKING
QTY
UPC2711TB-E3-A
C1G
3K/reel
UPC2712TB-E3-A
C1H
3K/reel
Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated
side of tape.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.