DATA SHEET PS150~PS1510 PLASTIC SILICON RECTIFIER VOLTAGE 50 to 1000 Volts CURRENT - 1.5 Amperes DO-15 Unit: inch ( mm ) FEATURES 1.0(25.4) MIN. .034(.86) .028(.71) • Low cost • High current capability • Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. .300(7.6) .230(5.8) • 1.5 Ampere operation at TA =50°C with no thermal runaway. • Exceeds environmental standards of MIL-S-19500/228 • Low leakage .140(3.6) .104(2.6) 1.0(25.4) MIN. MECHANICAL DATA Case: Molded plastic, DO-15 Terminals: Axial leads, solderable to MIL-STD-202,Method 208 Polarity: Color Band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. PS150 PS151 PS152 PS154 PS156 PS158 PS1510 UNIT Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average Forward Current .375"(9.5mm) lead length at TA=60°C 1.5 A Peak Forward Surge Current, IFM (surge):8.3ms single half sine-wave superimposed on rated load(JEDEC method) 50.0 A Maximum Forward Voltage at 1.5A DC 1.10 V 5.0 µA 500 µA Typical Junction capacitance (Note 1) 25.0 pF Typical Junction Resistance(Note 2) RθJA 45.0 °C/ W -55 to +150 °C Maximum DC Reverse Current at Rated DC Blocking Voltage TA=25°C Maximum DC Reverse Current at Rated DC Blocking Voltage TA=100°C Operating and Storage Temperature Range TJ ,TSTG NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient and from junction to lead length 0.375"(9.5mm) P.C.B. mounted DATE : SEP.14.2002 PAGE . 1 FORWARD SURGE CURRENT, AMPERES pk (HALF-SINE WAVE) RATING AND CHARACTERISTIC CURVES INSTANTANEOUS FORWARD CURRENT AMPERES 10 1.0 0.1 0 .01 .2 .4 .6 .8 1.0 1.2 1.4 1.6 40 30 20 10 0 1.8 1 2 4 6 20 8 10 40 60 80100 NUMBER OF CYCLES AT 60HZ INSTAN I TANEOUS FORWARD VOLTAGE, VOLTS Fig.2-MAXIMUM OVERLOAD SURGE-CURRENT Fig. 1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD RECTIFIED CURRENT AMPERES 50 2.00 1.75 1.50 1.25 1.00 0.75 MAXIMUM AVERAGE CURRENT RAING SINGLEPHASE, HALF-WAVE,60Hz RESISTIVE OR INDUCTIVELOAD .375"(9mm) LEAD LENGTH .50 .25 0 0 40 20 60 80 100 120 160 140 180 O AMBIENT TEMPERATURE, C Fig.3-FORWARD DERATING CURVE JUNCTION CAPACITANCE,pF 100 O T J =25 C 10 1 1 10 100 REVERSE VOLTAGE, VOLTS Fig.4- TYPICAL JUNCTION CAPACITANCE DATE : SEP.14.2002 PAGE . 2