PA Series RIGHT ANGLE, FLANGE MOUNT FILTER WITH IEC 60320 AC INLET SOCKET. MECHANICAL DIMENSIONS (Unit: mm) 13.9 40.0 G 2X 3.3 32.8 24.4 G 20.2 22.5 36.3 30.3 50.1 39.8 28.4 FEATURES 40.0 General purpose, Low cost filter with IEC connector providing effective equipment protection of line-to-ground noise up to 15 Amp, 250VAC. The compact design filter with low leakage current is well suited for applications that require strict emission standards. These filters are also available for Medical application and offer extremely low leakage current to comply with various industry standards. A bleeder resistor can be added to prevent excessive voltages from developing across the filter capacitors when there is no load. 30.5 41.3 4X R4.5 2X 21.8 3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT) APPLICATIONS Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment. TECHNICAL DATA • Rated Voltage: 115/250VAC • Rated Current: 1A, 2A, 3A, 6A, 10A, 15A • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA @ 115VAC 60Hz: 2µA* @ 250VAC 50Hz: 5µA* • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C * Medical application 2 Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords. 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com PA Series Example & Ordering Code PA 01 Q - 50 - 1 R Cy CX L N' L mH UL 1015, 18AWG STRANDED, 4” SOLDER WIRE =S Cy R L N' L mH G =W 3 NO BLEEDER RESISTOR BLEEDER RESISTOR (1/4 W, 1M) BLEEDER RESISTOR (1/2 W, 1M) Cy N = 00 = 50** = 60 L mH L R Cy CX L Cy N Cy (pF) 2200 3300 3300 1000 3300 3300 2200 2200 without Cy 2200 3300 1A 6.5 1.9 3.7 10.5 4.6 9.5 10.5 5.0 10.5 6.5 6.5 Inductance Per Current Rating 2A 3A 6A 3.8 2.5 0.8 1.5 1.1 0.6 2.7 1.8 0.8 4.2 2.5 1.05 3.4 2.5 0.9 4.3 1.8 0.85 4.0 1.2 0.53 3.7 1.8 0.6 6.5 2.5 1.05 4.0 2.5 0.8 4.0 2.5 0.8 (mH) 8A 1.05 4 ✘ 1.05 ✘ ✘ ✘ ✘ ✘ ✘ 1.05 1.05 15A 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 1A 6.5 1.9 3.7 4.6 9.5 6.5 10.5 5 Inductance Per Current Rating (mH) 2A 3A 6A 8A 3.8 2.5 0.8 1.05 ✘ 1.5 1.1 0.6 ✘ ✘ 2.7 1.8 ✘ 3.4 2.5 0.9 ✘ 4.3 1.8 0.85 4.0 2.5 0.8 1.05 ✘ 4 1.2 0.53 ✘ ✘ 3.7 0.6 R N = = = = = = = = = = = A B C D E F G H I J✢ K✢ N' L mH 1M L mH L R CX ✘ 0.2 0.2 0.2 ✘ ✘ 0.2 ✘ = = = = = = = = M1 M2 M3 M4 M5 M6 M7 M8 N' L mH 2M L mH L R L N G L' L N 15A 0.2 0.2 G' MEDICAL SCHEMATICS G 10A 0.2 0.3 0.3 0.3 0.3 0.3 L' L G Medical applications, select Attenuation code with corresponding component values from the table. Cx (µF) 0.1 0.015 0.1 0.047 0.033 0.22 0.047 0.033 L mH L 10A 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.3 0.3 0.3 N' LOAD Cx (µF) 0.1 0.015 0.1 0.1 0.047 0.033 0.047 0.033 without Cx 0.22 0.22 G' L mH G ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. L' LOAD 1 2✢ 3✢ 4✢ 1M 2M✢ LINE = = = = = = LINE STANDARD TYPE WITHOUT C(X); C(Y) ONLY C(X) & C(Y) BEHIND L WITHOUT C(X) & C(Y) WITHOUT C(Y); C(X) ONLY WITHOUT C(Y); C(X) BEHIND L LINE COMPONENT LOCATIONS: L' G' LOAD 6.6 L mH L =Q G' L' LOAD 2.0 -3.0L QUICK CONNECT LINE 8.0 LOAD G 2 6.3/0.25 Cy N L' G' LOAD L mH L 3.0 -3.6L 4.0/0.187 OPTIONS: 1 01 02 03 06 08 10 15* LINE TERMINAL: SCHEMATICS LINE = = = = = = = CURRENT RATING (A): C CX N' L mH G' Contact PDI for attenuation numbers Contact PDI for availability *15A for UL, cUL; 10A for CE, VDE ** N/A for 15A ✢ ✘ 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com 3 PA Series Attenuation Tables Non-Medical Applications❖ Medical Applications✧ Insertion loss in dB (50 Ohm circuit) Insertion loss in dB (50 Ohm circuit) Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 34 38 40 32 26 11 8 25 37 71 62 12 2A 29 32 55 48 49 51 8 23 34 68 64 14 3A 28 36 39 45 48 39 8 19 27 58 65 15 6A 18 24 28 44 50 47 8 18 26 43 51 31 10A 8 14 18 33 41 39 8 18 25 29 38 31 15A 7 14 19 34 40 38 7 17 23 39 47 27 A B 1A 2A 3A 6A 10A 15A 25 24 19 15 11 7 31 28 22 24 18 15 33 20 24 30 23 20 30 53 27 44 39 38 25 54 27 52 49 46 14 55 22 40 37 37 1 1 1 1 1 1 C 1A 2A 3A 6A 10A 15A 29 28 25 19 11 7 33 37 33 29 19 15 47 44 46 36 24 21 53 52 53 49 41 37 57 56 57 55 53 46 41 41 44 46 36 36 8 8 8 8 8 7 23 19 19 18 18 17 35 27 29 23 24 23 73 74 63 50 51 39 58 59 62 54 46 48 14 17 13 24 25 27 D 1A 2A 3A 6A 10A 15A 36 36 28 21 12 7 41 41 35 28 16 13 41 41 37 31 19 16 49 49 41 41 45 28 49 49 42 44 37 32 46 46 42 41 41 37 8 8 8 8 8 7 23 23 19 18 18 17 33 33 28 25 24 24 62 62 56 45 52 32 62 62 57 48 53 32 32 32 17 29 30 30 1A 2A 3A 6A 10A 15A 32 29 28 18 11 7 39 34 38 25 19 14 55 46 44 31 24 20 55 56 51 49 40 39 56 58 58 56 50 45 52 49 39 47 40 37 3 3 3 3 3 3 14 15 12 11 12 11 25 27 20 17 17 17 75 67 66 55 48 50 63 59 57 59 46 46 24 21 18 32 29 29 1A 2A 3A 6A 10A 15A 36 32 23 19 11 4 41 39 29 29 19 15 62 56 35 35 25 21 54 56 53 51 40 36 50 58 52 54 51 44 36 58 40 49 39 38 G 1A 2A 3A 6A 10A 15A 36 31 20 14 11 4 41 37 25 19 17 14 59 47 28 22 22 19 54 51 44 39 36 34 54 49 49 48 42 40 H 1A 2A 3A 6A 10A 15A 32 29 23 16 11 4 34 32 27 20 17 14 52 56 30 24 22 19 44 49 49 42 36 33 I 1A 2A 3A 6A 10A 15A 36 30 28 21 11 6 42 37 35 29 16 12 43 39 37 32 18 15 37 29 28 31 18 16 E F Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz Code Rating .15 .5 1 5 10 30 .15 .5 1 5 10 30 1A 34 38 39 32 16 21 9 26 37 62 51 11 2A 29 32 34 30 19 16 8 23 34 60 48 13 3A 28 35 37 28 22 19 8 19 28 52 44 12 6A 18 22 24 27 25 18 8 18 26 52 45 27 10A 8 13 15 17 16 14 8 18 25 32 28 24 15A 7 12 15 16 14 11 7 17 24 41 32 23 M1 M2 1A 2A 3A 6A 10A 15A 25 23 19 15 11 7 31 27 22 21 16 13 33 28 24 24 18 15 30 29 27 23 17 16 24 24 27 21 16 14 21 23 20 17 12 11 1 1 1 1 1 1 M3 1A 2A 3A 6A 10A 29 28 25 19 11 33 35 33 26 16 34 37 58 29 18 30 28 51 28 18 20 22 56 25 16 16 24 41 14 12 8 8 8 8 8 24 20 20 18 18 35 29 30 26 24 58 61 57 46 47 45 48 47 43 36 15 15 13 22 24 M4 1A 2A 3A 6A 10A 36 31 28 22 12 41 37 35 28 16 43 39 37 31 18 37 35 28 30 20 32 29 21 27 19 28 22 21 16 15 8 8 8 8 8 23 22 20 18 18 34 32 29 26 24 60 66 54 43 49 53 55 44 43 42 30 22 14 26 27 M5 1A 2A 3A 6A 10A 15A 32 29 28 18 11 7 37 33 35 23 16 13 40 34 37 25 18 15 35 30 28 27 18 16 29 16 22 26 17 14 23 21 23 20 14 11 3 3 3 3 3 3 15 16 13 12 11 11 25 27 22 19 17 17 74 57 59 48 42 43 58 50 48 49 38 30 21 20 16 30 27 22 1 11 22 64 70 29 1 10 21 76 62 23 1 9 17 66 65 33 2 8 13 47 57 28 2 9 14 46 51 29 1 8 14 50 46 26 M6 1A 2A 3A 6A 10A 15A 36 32 23 19 11 4 41 37 27 26 16 13 43 40 28 29 18 15 37 36 31 29 18 16 31 30 30 25 17 14 25 22 30 17 14 11 1 12 23 54 57 28 1 11 22 63 59 24 1 10 19 61 52 32 1 8 15 39 45 25 2 8 14 42 34 25 1 8 14 48 29 21 47 40 42 41 38 38 3 3 3 3 3 3 M7 1A 2A 3A 6A 10A 36 31 20 14 11 41 37 24 17 16 43 40 25 19 18 37 36 26 22 18 32 29 24 22 16 28 25 23 19 12 3 3 3 3 3 44 50 52 51 41 39 41 45 46 42 40 39 1 14 25 60 66 21 1 12 24 67 62 14 1 9 17 59 69 30 1 8 14 58 52 33 2 8 14 37 54 27 1 8 14 48 42 28 1A 2A 3A 6A 10A 32 29 23 16 11 36 33 26 19 16 37 34 28 21 18 28 31 31 24 18 19 20 30 24 17 11 17 31 21 14 1 14 26 53 42 16 1 13 24 61 50 14 1 9 19 54 53 29 2 8 15 56 38 33 2 8 14 41 34 25 31 22 22 27 17 15 36 27 31 17 14 11 1 1 1 1 1 1 4 12 50 64 16 4 13 53 57 16 3 8 48 59 31 4 8 36 52 28 4 8 26 46 24 4 8 25 48 28 15 14 12 11 11 12 2 1 1 1 1 1 26 24 19 17 17 17 5 3 2 1 1 1 68 69 61 48 39 38 17 14 11 7 5 1 71 63 57 50 55 42 23 21 18 12 3 3 32 26 27 33 27 28 M8 5 14 41 46 17 5 14 45 58 15 4 10 39 50 34 4 9 30 49 28 4 8 26 45 24 3 7 26 39 23 16 15 12 11 11 27 25 21 18 17 64 80 47 43 48 60 60 42 35 34 31 25 22 29 23 ✧This table applies to schematic 1M only. Visit our website or contact PDI for other schematic attenuation numbers. 33 13 12 23 9 6 ❖This table applies to schematic 1 only. Visit our website or contact PDI for other schematic attenuation numbers. 4 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com