POSEICO SPA Via N. Lorenzi 8, 16152 Genova - ITALY Tel. +39 010 6556234 - Fax +39 010 6557519 Sales Office: Tel. +39 010 6556775 - Fax +39 010 6442510 POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation FAST RECOVERY DIODE FOR IGBT,IEGT,GCT APPLICATIONS SNUBBERLESS OPERATION LOW LOSSES SOFT RECOVERY ARF360 Repetitive voltage up to Mean forward current Surge current 3300 V 290 A 5 kA FINAL SPECIFICATION mar 03 - ISSUE : 4 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING V RRM Repetitive peak reverse voltage 125 3300 V V RSM Non-repetitive peak reverse voltage 125 3400 V I RRM Repetitive peak reverse current 125 50 V DC LINK Permanent DC voltage 125 1500 V V=VRRM mA CONDUCTING I F (AV) Mean forward current 180° sin, 50 Hz, Th=55°C, double side cooled 290 A I F (AV) Mean forward current 180° sin, 50 Hz, Th=55°C, double side cooled 300 A I FSM Surge forward current Sine wave, 10 ms reapplied reverse voltage up to 50% VRSM 125 4.5 kA 101 x1E3 A²s Forward current = 1200 125 6.78 V V I² t I² t V FM Forward voltage V F(TO) Threshold voltage 125 1.86 r F Forward slope resistance 125 4.100 125 55 µC 125 85 A A mohm SWITCHING Q rr Reverse recovery charge I rr Peak reverse recovery current t rr Reverse recovery time Q rr Reverse recovery charge I rr Peak reverse recovery current s Softness (s-factor), min E OFF Turn off energy dissipation V FR Peak forward recovery IF= VR = 500 A 50 V IF= 500 A di/dt= 1000 A/µs VR = 1800 V di/dt= 100 A/µs µs 125 226 µC 545 A J di/dt= 400 A/µs 125 V MOUNTING R th(j-c) Thermal impedance Junction to heatsink, double side cooled 50 °C/kW R th(c-h) Thermal impedance Case to heatsink, double side cooled 15 °C/kW T Operating junction temperature -30 / 125 °C Mounting force 8.0 / 9.0 kN F j Mass 85 ORDERING INFORMATION : ARF360 S 33 standard specification VRRM/100 g ARF360 FAST RECOVERY DIODE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation mar 03 - ISSUE : 4 SURGE CHARACTERISTIC Tj = 125 °C 1000 5 900 4.5 800 4 700 3.5 600 3 ITSM [kA] Forward Current [A] FORWARD CHARACTERISTIC Tj = 125 °C 500 400 2.5 2 300 1.5 200 1 100 0.5 0 0 1 3 5 7 1 Forward Voltage [V] 10 n° cycles TRANSIENT THERMAL IMPEDANCE DOUBLE SIDE COOLED 60.0 Zth j-h [°C/kW] 50.0 40.0 30.0 20.0 10.0 0.0 0.001 0.01 0.1 1 10 100 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SPA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported. 100