TI DAC8311IDCKRG4

DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
1.8V to 5.5V, 80µA, 14- and 16-Bit, Low-Power, Single-Channel,
DIGITAL-TO-ANALOG CONVERTERS in SC70 Package
FEATURES
DESCRIPTION
1
• Relative Accuracy:
– 1 LSB INL (DAC8311: 14-bit)
– 4 LSB INL (DAC8411: 16-bit)
• microPower Operation: 80µA at 1.8V
• Power-Down: 0.5µA at 5V, 0.1µA at 1.8V
• Wide Power Supply: +1.8V to +5.5V
• Power-On Reset to Zero Scale
• Straight Binary Data Format
• Low Power Serial Interface with
Schmitt-Triggered Inputs: Up to 50MHz
• On-Chip Output Buffer Amplifier, Rail-to-Rail
Operation
• SYNC Interrupt Facility
• Extended Temperature Range –40°C to +125°C
• Pin-Compatible Family in a Tiny, 6-Pin SC70
Package
234
APPLICATIONS
•
•
•
•
Portable, Battery-Powered instruments
Process Control
Digital Gain and Offset Adjustment
Programmable Voltage and Current Sources
RELATED
DEVICES
Pin and
Function
Compatible
16-BIT
14-BIT
12-BIT
10-BIT
8-BIT
DAC8411
DAC8311
DAC7311
DAC6311
DAC5311
The DAC8311 (14-bit) and DAC8411 (16-bit) are
low-power,
single-channel,
voltage
output
digital-to-analog converters (DAC). They provide
excellent
linearity
and
minimize
undesired
code-to-code transient voltages while offering an
easy upgrade path within a pin-compatible family. All
devices use a versatile, 3-wire serial interface that
operates at clock rates of up to 50MHz and is
compatible
with
standard
SPI™,
QSPI™,
MICROWIRE™, and digital signal processor (DSP)
interfaces.
All devices use an external power supply as a
reference voltage to set the output range. The
devices incorporate a power-on reset (POR) circuit
that ensures the DAC output powers up at 0V and
remains there until a valid write to the device occurs.
The DAC8311 and DAC8411 contain a power-down
feature, accessed over the serial interface, that
reduces current consumption of the device to 0.1µA
at 1.8V in power down mode. The low power
consumption of this part in normal operation makes it
ideally
suited
for
portable,
battery-operated
equipment. The power consumption is 0.55mW at 5V,
reducing to 2.5µW in power-down mode.
These devices are pin-compatible with the DAC5311,
DAC6311, and DAC7311, offering an easy upgrade
path from 8-, 10-, and 12-bit resolution to 14- and
16-bit. All devices are available in a small, 6-pin,
SC70 package. This package offers a flexible,
pin-compatible, and functionally-compatible drop-in
solution within the family over an extended
temperature range of –40°C to +125°C.
AVDD
GND
Power-On
Reset
REF(+)
DAC
Register
14-/16-Bit DAC
Input Control
Logic
SYNC SCLK
Output
Buffer
Power-Down
Control Logic
VOUT
Resistor
Network
DIN
1
2
3
4
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI, QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corporation.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION (1)
PRODUCT
MAXIMUM
RELATIVE
ACCURACY
(LSB)
MAXIMUM
DIFFERENTIAL
NONLINEARITY
(LSB)
PACKAGELEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
DAC8411
±8
±2
SC70-6
DCK
–40°C to 125°C
D84
DAC8311
±4
±1
SC70-6
DCK
–40°C to 125°C
D83
(1)
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER
VALUE
UNIT
AVDD to GND
–0.3 to +6
V
Digital input voltage to GND
–0.3 to +AVDD +0.3
V
AVOUT to GND
–0.3 to +AVDD +0.3
V
Operating temperature range
–40 to +125
°C
Storage temperature range
–65 to +150
°C
+150
°C
Junction temperature (TJ max)
Power dissipation
(TJ max – TA)/θJA
θJA thermal impedance
(1)
2
250
°C/W
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute
maximum conditions for extended periods may affect device reliability.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
ELECTRICAL CHARACTERISTICS
At AVDD = +1.8V to +5.5V, RL = 2kΩ to GND, and CL = 200 pF to GND, unless otherwise noted.
DAC8411, DAC8311
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
±4
±8
±4
±12
±0.5
±2
UNIT
STATIC PERFORMANCE (1)
Resolution
DAC8411
Relative accuracy
16
3.6V to 5V
Measured by the line passing
through codes 485 and 64714 1.8V to 3.6V
Differential
nonlinearity
Resolution
DAC8311
Relative accuracy
Measured by the line passing through two codes (2)
Offset error drift
LSB
Bits
±1
±4
LSB
±0.125
±1
LSB
±0.05
±4
mV
µV/°C
3
Zero code error
All zeros loaded to the DAC register
Full-scale error
All ones loaded to DAC register
0.2
Gain error
Gain temperature coefficient
LSB
14
Measured by the line passing through codes 120 and
16200
Differential
nonlinearity
Offset error
Bits
mV
0.04
0.2
% of FSR
0.05
±0.15
% of FSR
AVDD = +5V
±0.5
AVDD = +1.8V
±1.5
ppm of
FSR/°C
OUTPUT CHARACTERISTICS (3)
Output voltage range
Output voltage settling time
0
RL = 2kΩ, CL = 200 pF, AVDD = 5V, 1/4 scale to 3/4 scale
RL = 2MΩ, CL = 470pF
Slew rate
Capacitive load stability
Code change glitch impulse
RL = ∞
RL = 2kΩ
1LSB change around major carry
Digital feedthrough
Power-on glitch impulse
RL = 2kΩ, CL = 200pF, AVDD = 5V
Power-up time
AVDD
V
10
µs
12
µs
0.7
V/µs
470
pF
1000
pF
0.5
nV-s
0.5
nV-s
17
mV
0.5
Ω
AVDD = +5V
50
mA
AVDD = +3V
20
mA
Coming out of power-down mode
50
µs
DC output impedance
Short-circuit current
6
AC PERFORMANCE
SNR
THD
SFDR
TA= +25°C, BW = 20kHz, 16-bit level, AVDD = 5V,
fOUT = 1kHz, 1st 19 harmonics removed for SNR
calculation
SINAD
DAC output noise density (4)
DAC output noise (5)
(1)
(2)
(3)
(4)
(5)
88
dB
–66
dB
66
dB
66
dB
TA= +25°C, at zero-scale input, fOUT = 1kHz, AVDD = 5V
17
nV/√Hz
TA= +25°C, at mid-code input, fOUT = 1kHz, AVDD = 5V
110
nV/√Hz
TA= +25°C, at mid-code input, 0.1Hz to 10Hz, AVDD = 5V
3
µVpp
Linearity calculated using a reduced code range of 485 to 64714 for 16-bit, and 120 to 16200 for 14-bit, output unloaded.
Straight line passing through codes 485 and 64714 for 16-bit, and 120 and 16200 for 14-bit, output unloaded.
Specified by design and characterization, not production tested.
For more details, see Figure 31.
For more details, see Figure 32.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
3
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
At AVDD = +1.8V to +5.5V, RL = 2kΩ to GND, and CL = 200 pF to GND, unless otherwise noted.
DAC8411, DAC8311
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
LOGIC INPUTS (6)
±1
µA
AVDD = +5V
0.8
V
AVDD = +1.8V
0.5
V
Input current
VINL, input low voltage
VINH, input high voltage
AVDD = +5V
1.8
AVDD = +1.8V
1.1
Pin capacitance
V
V
1.5
3
pF
5.5
V
AVDD = 3.6V to 5.5V
110
160
AVDD = 2.7V to 3.6V
95
150
AVDD = 1.8V to 2.7V
80
140
AVDD = 3.6V to 5.5V
0.5
3.5
AVDD = 2.7V to 3.6V
0.4
3.0
POWER REQUIREMENTS
AVDD
1.8
Normal mode
VINH = AVDD and VINL =
GND, at mid-scale code (7)
IDD
All power-down mode
Normal mode
VINH = AVDD and VINL =
GND, at mid-scale code
VINH = AVDD and VINL =
GND, at mid-scale code
Power
dissipation
All power-down mode
VINH = AVDD and VINL =
GND, at mid-scale code
AVDD = 1.8V to 2.7V
0.1
2.0
AVDD = 3.6V to 5.5V
0.55
0.88
AVDD = 2.7V to 3.6V
0.25
0.54
AVDD = 1.8V to 2.7V
0.14
0.38
AVDD = 3.6V to 5.5V
2.50
19.2
AVDD = 2.7V to 3.6V
1.08
10.8
AVDD = 1.8V to 2.7V
0.72
8.1
µA
µA
mW
µW
TEMPERATURE RANGE
Specified performance
(6)
(7)
4
–40
+125
°C
Specified by design and characterization, not production tested.
For more details, see Figure 12, Figure 53, and Figure 83.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
PIN CONFIGURATION
DCK PACKAGE
SC70-6
(TOP VIEW)
SYNC
1
6
VOUT
SCLK
2
5
GND
DIN
3
4
AVDD/VREF
Table 1. PIN DESCRIPTION
PIN
NAME
DESCRIPTION
1
SYNC
Level-triggered control input (active low). This is the frame sychronization signal for the input data. When
SYNC goes low, it enables the input shift register and data are transferred in on the falling edges of the
following clocks. The DAC is updated following the 24th (DAC8411) or 16th (DAC8311) clock cycle,
unless SYNC is taken high before this edge, in which case the rising edge of SYNC acts as an interrupt
and the write sequence is ignored by the DAC8x11. Refer to the DAC8311 and DAC8411 SYNC Interrupt
sections for more details.
2
SCLK
Serial Clock Input. Data can be transferred at rates up to 50MHz.
3
DIN
4
AVDD/VREF
5
GND
Ground reference point for all circuitry on the part.
6
VOUT
Analog output voltage from DAC. The output amplifier has rail-to-rail operation.
Serial Data Input. Data is clocked into the 24-bit (DAC8411) or 16-bit (DAC8311) input shift register on
the falling edge of the serial clock input.
Power Supply Input, +1.8V to 5.5V.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
5
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
SERIAL WRITE OPERATION: 14-Bit (DAC8311)
t9
t1
SCLK
1
16
t8
t3
t4
t2
t7
SYNC
t10
t6
t5
DB15
DIN
DB15
DB0
TIMING REQUIREMENTS (1) (2)
All specifications at –40°C to +125°C, and AVDD = +1.8V to +5.5V, unless otherwise noted.
PARAMETER
t1 (3)
SCLK cycle time
t2
SCLK high time
t3
SCLK low time
t4
SYNC to SCLK rising edge setup time
t5
Data setup time
t6
Data hold time
t7
SCLK falling edge to SYNC rising edge
t8
Minimum SYNC high time
t9
16th SCLK falling edge to SYNC falling edge
t10
SYNC rising edge to 16th SCLK falling edge
(for successful SYNC interrupt)
(1)
(2)
(3)
6
TEST CONDITIONS
MIN
AVDD = 1.8V to 3.6V
50
AVDD = 3.6V to 5.5V
20
AVDD = 1.8V to 3.6V
25
AVDD = 3.6V to 5.5V
10
AVDD = 1.8V to 3.6V
25
AVDD = 3.6V to 5.5V
10
AVDD = 1.8V to 3.6V
0
AVDD = 3.6V to 5.5V
0
AVDD = 1.8V to 3.6V
5
AVDD = 3.6V to 5.5V
5
AVDD = 1.8V to 3.6V
4.5
AVDD = 3.6V to 5.5V
4.5
AVDD = 1.8V to 3.6V
0
AVDD = 3.6V to 5.5V
0
AVDD = 1.8V to 3.6V
50
AVDD = 3.6V to 5.5V
20
AVDD = 1.8V to 3.6V
100
AVDD = 3.6V to 5.5V
100
AVDD = 1.8V to 3.6V
15
AVDD = 3.6V to 5.5V
15
TYP
MAX
UNIT
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
All input signals are specified with tR = tF = 3ns (10% to 90% of AVDD) and timed from a voltage level of (VIL + VIH)/2.
See 14-Bit Serial Write Operation timing diagram.
Maximum SCLK frequency is 50MHz at AVDD = 3.6V to 5.5V and 20MHz at AVDD = 1.8V to 3.6V.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
SERIAL WRITE OPERATION: 16-Bit (DAC8411)
t9
t1
SCLK
1
24
t8
t3
t4
t2
t7
SYNC
t10
t6
t5
DIN
DB23
DB23
DB0
TIMING REQUIREMENTS (1) (2)
All specifications at –40°C to +125°C, and AVDD = +1.8V to +5.5V, unless otherwise noted.
PARAMETER
t1 (3)
SCLK cycle time
t2
SCLK high time
t3
SCLK low time
t4
SYNC to SCLK rising edge setup time
t5
Data setup time
t6
Data hold time
t7
SCLK falling edge to SYNC rising edge
t8
Minimum SYNC high time
t9
24th SCLK falling edge to SYNC falling edge
t10
SYNC rising edge to 24th SCLK falling edge
(for successful SYNC interrupt)
(1)
(2)
(3)
TEST CONDITIONS
MIN
AVDD = 1.8V to 3.6V
50
AVDD = 3.6V to 5.5V
20
AVDD = 1.8V to 3.6V
25
AVDD = 3.6V to 5.5V
10
AVDD = 1.8V to 3.6V
25
AVDD = 3.6V to 5.5V
10
AVDD = 1.8V to 3.6V
0
AVDD = 3.6V to 5.5V
0
AVDD = 1.8V to 3.6V
5
AVDD = 3.6V to 5.5V
5
AVDD = 1.8V to 3.6V
4.5
AVDD = 3.6V to 5.5V
4.5
AVDD = 1.8V to 3.6V
0
AVDD = 3.6V to 5.5V
0
AVDD = 1.8V to 3.6V
50
AVDD = 3.6V to 5.5V
20
AVDD = 1.8V to 3.6V
100
AVDD = 3.6V to 5.5V
100
AVDD = 1.8V to 3.6V
15
AVDD = 3.6V to 5.5V
15
TYP
MAX
UNIT
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
All input signals are specified with tR = tF = 3ns (10% to 90% of AVDD) and timed from a voltage level of (VIL + VIH)/2.
See 16-Bit Serial Write Operation timing diagram.
Maximum SCLK frequency is 50MHz at AVDD = 3.6V to 5.5V and 20MHz at AVDD = 1.8V to 3.6V.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
7
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +5V
At TA = +25°C, AVDD = +5V, and DAC loaded with mid-scale code, unless otherwise noted.
6
4
2
0
-2
-4
-6
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (–40°C)
2
AVDD = 5V
LE (LSB)
LE (LSB)
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (–40°C)
-2
0.2
DLE (LSB)
DLE (LSB)
0.5
0
-0.5
8192
16384 24576 32768 40960 49152
0
2048
4096
6144
8192
10240 12288
14336 16384
Digital Input Code
Digital Input Code
Figure 1.
Figure 2.
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+25°C)
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+25°C)
6
4
2
0
-2
-4
-6
2
AVDD = 5V
AVDD = 5V
1
0
-1
-2
0.2
DLE (LSB)
1.0
DLE (LSB)
0
-0.1
57344 65536
LE (LSB)
LE (LSB)
0
0.5
0
-0.5
0.1
0
-0.1
-0.2
-1.0
0
8192
16384 24576 32768 40960 49152
0
57344 65536
2048
4096
6144
8192
10240 12288
14336 16384
Digital Input Code
Digital Input Code
Figure 3.
Figure 4.
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+125°C)
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+125°C)
6
4
2
0
-2
-4
-6
2
AVDD = 5V
LE (LSB)
LE (LSB)
0.1
-0.2
-1.0
AVDD = 5V
1
0
-1
-2
0.2
DLE (LSB)
1.0
DLE (LSB)
0
-1
1.0
0.5
0
-0.5
0.1
0
-0.1
-0.2
-1.0
0
8
AVDD = 5V
1
8192
16384 24576 32768 40960 49152
57344 65536
0
2048
4096
6144
8192
10240 12288
Digital Input Code
Digital Input Code
Figure 5.
Figure 6.
Submit Documentation Feedback
14336 16384
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +5V (continued)
At TA = +25°C, AVDD = +5V, and DAC loaded with mid-scale code, unless otherwise noted.
ZERO-CODE ERROR
vs TEMPERATURE
SOURCE CURRENT
AT POSITIVE RAIL
0.4
5.5
Analog Output Voltage (V)
Zero-Code Error (mV)
AVDD = 5V
0.3
0.2
0.1
0
-40 -25 -10
5.0
4.5
4.0
3.5
3.0
AVDD = 5V
DAC Loaded with FFFFh
2.5
5
20
35
50
65
80
95
110 125
0
6
Figure 7.
Figure 8.
OFFSET ERROR
vs TEMPERATURE
SINK CURRENT
AT NEGATIVE RAIL
8
10
8
10
0.6
AVDD = 5V
DAC Loaded with 0000h
AVDD = 5V
Analog Output Voltage (V)
0.4
Offset Error (mV)
4
ISOURCE (mA)
0.6
0.2
0
-0.2
-0.4
-0.6
-40 -25 -10
0.4
0.2
0
5
20
35
50
65
80
95
110 125
0
2
4
6
Temperature (°C)
ISINK (mA)
Figure 9.
Figure 10.
FULL-SCALE ERROR
vs TEMPERATURE
POWER-SUPPLY CURRENT
vs DIGITAL INPUT CODE
120
0.06
AVDD = 5.5V
AVDD = 5V
Power-Supply Current (mA)
0.04
Full-Scale Error (mV)
2
Temperature (°C)
0.02
0
-0.02
-0.04
-0.06
-40 -25 -10
100
80
60
5
20
35
50
65
80
95
110 125
0
8192 16384 24576 32768 40960 49152 57344 65536
Digital Input Code
Temperature (°C)
Figure 11.
Figure 12.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
9
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +5V (continued)
At TA = +25°C, AVDD = +5V, and DAC loaded with mid-scale code, unless otherwise noted.
POWER-SUPPLY CURRENT
vs TEMPERATURE
POWER-DOWN CURRENT
vs TEMPERATURE
140
1.6
AVDD = 5V
Quiescent Current (mA)
Power-Supply Current (mA)
AVDD = 5V
130
120
110
100
-40 -25 -10
5
20
35
50
65
80
95
0.8
0.4
0
-40 -25 -10
110 125
5
20
35
50
65
80
Temperature (°C)
Temperature (°C)
Figure 13.
Figure 14.
POWER-SUPPLY CURRENT
vs LOGIC INPUT VOLTAGE
POWER-SUPPLY CURRENT
HISTOGRAM
50
2000
SYNC Input (all other digital inputs = GND)
95
110 125
AVDD = 5.5V
45
40
1500
35
Sweep from
0V to 5.5V
Occurrences
Power-Supply Current (mA)
1.2
1000
Sweep from
5.5V to 0V
30
25
20
15
500
10
5
VLOGIC (V)
-40
136
140
128
132
IDD (mA)
Figure 15.
Figure 16.
TOTAL HARMONIC DISTORTION
vs OUTPUT FREQUENCY
SIGNAL-TO-NOISE RATIO
vs OUTPUT FREQUENCY
94
AVDD = 5V, fS = 225kSPS,
-1dB FSR Digital Input,
Measurement Bandwidth = 20kHz
-50
120
5.0
124
4.5
112
4.0
116
3.5
104
3.0
108
2.5
96
2.0
100
1.5
88
1.0
92
0.5
80
0
84
0
0
AVDD = 5V,
fS = 225kSPS,
-1dB FSR Digital Input,
Measurement Bandwidth = 20kHz
THD
92
SNR (dB)
THD (dB)
-60
2nd Harmonic
-70
90
88
-80
3rd Harmonic
86
-90
84
-100
0
10
1
2
3
4
5
0
1
2
3
fOUT (kHz)
fOUT (kHz)
Figure 17.
Figure 18.
Submit Documentation Feedback
4
5
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +5V (continued)
At TA = +25°C, AVDD = +5V, and DAC loaded with mid-scale code, unless otherwise noted.
CLOCK FEEDTHROUGH
5V, 2MHz, MIDSCALE
POWER SPECTRAL DENSITY
0
AVDD = 5V,
fOUT = 1kHz, fS = 225kSPS,
Measurement Bandwidth = 20kHz
VOUT (500mV/div)
20
Gain (dB)
-40
-60
-80
-100
AVDD = 5V
Clock Feedthrough Impulse ~0.5nV-s
-120
-140
0
5
10
15
Time (500ns/div)
20
Frequency (kHz)
Figure 19.
Figure 20.
GLITCH ENERGY
5V, 16-BIT, 1LSB STEP, RISING EDGE
GLITCH ENERGY
5V, 16-BIT, 1LSB STEP, FALLING EDGE
Clock
Feedthrough
~0.5nV-s
AVDD = 5V
From Code: 8000h
To Code: 7FFFh
VOUT (100mV/div)
VOUT (100mV/div)
AVDD = 5V
From Code: 7FFFh
To Code: 8000h
Clock
Feedthrough
~0.5nV-s
Glitch Impulse
< 0.5nV-s
Glitch Impulse
< 0.5nV-s
Time (5ms/div)
Time (5ms/div)
GLITCH ENERGY
5V, 14-BIT, 1LSB STEP, RISING EDGE
GLITCH ENERGY
5V, 14-BIT, 1LSB STEP, FALLING EDGE
Glitch Impulse
< 0.5nV-s
Clock
Feedthrough
~0.5nV-s
AVDD = 5V
From Code: 2000h
To Code: 2001h
VOUT (100mV/div)
Figure 22.
VOUT (100mV/div)
Figure 21.
AVDD = 5V
From Code: 2001h
To Code: 2000h
Clock
Feedthrough
~0.5nV-s
Time (5ms/div)
Glitch Impulse
< 0.5nV-s
Time (5ms/div)
Figure 23.
Figure 24.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
11
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +5V (continued)
At TA = +25°C, AVDD = +5V, and DAC loaded with mid-scale code, unless otherwise noted.
FULL-SCALE SETTLING TIME
5V RISING EDGE
FULL-SCALE SETTLING TIME
5V FALLING EDGE
AVDD = 5V
From Code: 0000h
To Code: FFFFh
AVDD = 5V
From Code: FFFFh
To Code: 0000h
Rising Edge
1V/div
Zoomed Rising Edge
100mV/div
Falling Edge
1V/div
Zoomed Falling Edge
100mV/div
Trigger Pulse 5V/div
Trigger Pulse 5V/div
Time (2ms/div)
Time (2ms/div)
Figure 25.
Figure 26.
HALF-SCALE SETTLING TIME
5V RISING EDGE
HALF-SCALE SETTLING TIME
5V FALLING EDGE
AVDD = 5V
From Code: C000h
To Code: 4000h
Falling
Edge
1V/div
Rising
Edge
1V/div
Zoomed Falling Edge
100mV/div
Zoomed Rising Edge
100mV/div
AVDD = 5V
From Code: 4000h
To Code: C000h
Trigger
Pulse
5V/div
Trigger
Pulse
5V/div
Time (2ms/div)
POWER-ON RESET TO 0V
POWER-ON GLITCH
POWER-OFF GLITCH
17mV
AVDD = 5V
DAC = Zero Scale
Load = 200pF || 10kW
VOUT (20mV/div)
AVDD = 5V
DAC = Zero Scale
Load = 200pF || 10kW
AVDD (2V/div)
Figure 28.
AVDD (2V/div)
VOUT (20mV/div)
12
Time (2ms/div)
Figure 27.
Time (5ms/div)
Time (10ms/div)
Figure 29.
Figure 30.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +5V (continued)
At TA = +25°C, AVDD = +5V, and DAC loaded with mid-scale code, unless otherwise noted.
DAC OUTPUT NOISE DENSITY
vs FREQUENCY
DAC OUTPUT NOISE
0.1Hz TO 10Hz BANDWIDTH
300
AVDD = 5V,
DAC = Midscale, No Load
AVDD = 5V
VNOISE (1mV/div)
Noise (nV/ÖHz)
250
200
150
Midscale
100
3mVPP
Zero Scale
Full Scale
50
0
10
100
1k
10k
Time (2s/div)
100k
Frequency (Hz)
Figure 31.
Figure 32.
POWER-SUPPLY CURRENT
vs POWER-SUPPLY VOLTAGE
POWER-DOWN CURRENT
vs POWER-SUPPLY VOLTAGE
120
0.4
AVDD = 1.8V to 5.5V
110
Quiescent Current (mA)
Power-Supply Current (mA)
AVDD = 1.8V to 5.5V
100
90
80
70
1.800
2.725
3.650
4.575
5.500
0.3
0.2
0.1
0
1.800
2.725
3.650
AVDD (V)
AVDD (V)
Figure 33.
Figure 34.
4.575
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
5.500
13
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +3.6V
At TA = 25°C, and AVDD = +3.6V, unless otherwise noted.
POWER-SUPPLY CURRENT
vs DIGITAL INPUT CODE
POWER-SUPPLY CURRENT
vs TEMPERATURE
100
140
AVDD = 3.6V
Power-Supply Current (mA)
Power-Supply Current (mA)
AVDD = 3.6V
90
80
70
60
50
0
130
120
110
100
90
80
-40 -25 -10
8192 16384 24576 32768 40960 49152 57344 65536
50
65
80
Figure 36.
POWER-SUPPLY CURRENT
vs LOGIC INPUT VOLTAGE
POWER-DOWN CURRENT
vs TEMPERATURE
95
110 125
95
110 125
1.2
AVDD = 3.6V
Quiescent Current (mA)
Power-Supply Current (mA)
35
Figure 35.
SYNC Input (all other digital inputs = GND)
900
Sweep from
0V to 3.6V
600
300
0.8
0.4
Sweep from
3.6V to 0V
0
-40 -25 -10
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5
20
35
50
65
80
Temperature (°C)
VLOGIC (V)
Figure 37.
Figure 38.
SOURCE CURRENT
AT POSITIVE RAIL
SINK CURRENT
AT NEGATIVE RAIL
3.7
0.6
AVDD = 3.6V
DAC Loaded with 0000h
3.5
Analog Output Voltage (V)
Analog Output Voltage (V)
20
Temperature (°C)
1200
3.3
3.1
2.9
2.7
AVDD = 3.6V
DAC Loaded with FFFFh
2.5
0
14
5
Digital Input Code
2
4
0.4
0.2
0
6
8
10
0
2
4
6
ISOURCE (mA)
ISINK (mA)
Figure 39.
Figure 40.
Submit Documentation Feedback
8
10
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +3.6V (continued)
At TA = 25°C, and AVDD = +3.6V, unless otherwise noted.
POWER-SUPPLY CURRENT
HISTOGRAM
50
45
AVDD = 3.6V
40
Occurrences
35
30
25
20
15
10
5
126
130
118
122
110
114
102
106
94
98
86
90
78
82
70
74
0
IDD (mA)
Figure 41.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
15
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +2.7V
At TA = 25°C, and AVDD = +2.7V, unless otherwise noted.
6
4
2
0
-2
-4
-6
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (–40°C)
2
AVDD = 2.7V
LE (LSB)
LE (LSB)
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (–40°C)
-2
0.2
DLE (LSB)
DLE (LSB)
0.5
0
-0.5
8192
16384 24576 32768 40960 49152
0
2048
4096
6144
8192
10240 12288
14336 16384
Digital Input Code
Digital Input Code
Figure 42.
Figure 43.
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+25°C)
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+25°C)
6
4
2
0
-2
-4
-6
2
AVDD = 2.7V
AVDD = 2.7V
1
0
-1
-2
0.2
DLE (LSB)
1.0
DLE (LSB)
0
-0.1
57344 65536
LE (LSB)
LE (LSB)
0
0.5
0
-0.5
0.1
0
-0.1
-0.2
-1.0
0
8192
16384 24576 32768 40960 49152
0
57344 65536
2048
4096
6144
8192
10240 12288
14336 16384
Digital Input Code
Digital Input Code
Figure 44.
Figure 45.
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+125°C)
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+125°C)
6
4
2
0
-2
-4
-6
2
AVDD = 2.7V
LE (LSB)
LE (LSB)
0.1
-0.2
-1.0
AVDD = 2.7V
1
0
-1
-2
0.2
DLE (LSB)
1.0
DLE (LSB)
0
-1
1.0
0.5
0
-0.5
0.1
0
-0.1
-0.2
-1.0
0
16
AVDD = 2.7V
1
8192
16384 24576 32768 40960 49152
57344 65536
0
2048
4096
6144
8192
10240 12288
Digital Input Code
Digital Input Code
Figure 46.
Figure 47.
Submit Documentation Feedback
14336 16384
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +2.7V (continued)
At TA = 25°C, and AVDD = +2.7V, unless otherwise noted.
ZERO-CODE ERROR
vs TEMPERATURE
SOURCE CURRENT
AT POSITIVE RAIL
0.4
2.8
Analog Output Voltage (V)
Zero-Code Error (mV)
AVDD = 2.7V
0.3
0.2
0.1
0
-40 -25 -10
2.6
2.4
2.2
AVDD = 2.7V
DAC Loaded with FFFFh
2.0
5
20
35
50
65
80
95
110 125
0
6
Figure 48.
Figure 49.
OFFSET ERROR
vs TEMPERATURE
SINK CURRENT
AT NEGATIVE RAIL
8
10
8
10
0.6
AVDD = 2.7V
DAC Loaded with 0000h
AVDD = 2.7V
Analog Output Voltage (V)
0.4
Offset Error (mV)
4
ISOURCE (mA)
0.6
0.2
0
-0.2
-0.4
-0.6
-40 -25 -10
0.4
0.2
0
5
20
35
50
65
80
95
110 125
0
2
4
6
Temperature (°C)
ISINK (mA)
Figure 50.
Figure 51.
FULL-SCALE ERROR
vs TEMPERATURE
POWER-SUPPLY CURRENT
vs DIGITAL INPUT CODE
100
0.06
AVDD = 2.7V
AVDD = 2.7V
Power-Supply Current (mA)
0.04
Full-Scale Error (mV)
2
Temperature (°C)
0.02
0
-0.02
-0.04
-0.06
-40 -25 -10
90
80
70
60
50
5
20
35
50
65
80
95
110 125
0
8192 16384 24576 32768 40960 49152 57344 65536
Digital Input Code
Temperature (°C)
Figure 52.
Figure 53.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
17
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +2.7V (continued)
At TA = 25°C, and AVDD = +2.7V, unless otherwise noted.
POWER-SUPPLY CURRENT
vs TEMPERATURE
POWER-DOWN CURRENT
vs TEMPERATURE
120
1.0
AVDD = 2.7V
110
Quiescent Current (mA)
Power-Supply Current (mA)
AVDD = 2.7V
100
90
80
70
-40 -25 -10
5
20
35
50
65
80
95
0.6
0.4
0.2
0
-40 -25 -10
110 125
5
20
35
50
65
80
Temperature (°C)
Temperature (°C)
Figure 54.
Figure 55.
POWER-SUPPLY CURRENT
vs LOGIC INPUT VOLTAGE
POWER-SUPPLY CURRENT
HISTOGRAM
50
800
SYNC Input (all other digital inputs = GND)
95
110 125
AVDD = 2.7V
45
40
600
35
Occurrences
Power-Supply Current (mA)
0.8
Sweep from
0V to 2.7V
400
Sweep from
2.7V to 0V
30
25
20
15
200
10
5
VLOGIC (V)
IDD (mA)
Figure 56.
Figure 57.
TOTAL HARMONIC DISTORTION
vs OUTPUT FREQUENCY
SIGNAL-TO-NOISE RATIO
vs OUTPUT FREQUENCY
104
100
96
92
88
80
3.0
88
-20
AVDD = 2.7V, fS = 225kSPS,
-1dB FSR Digital Input,
Measurement Bandwidth = 20kHz
AVDD = 2.7V, fS = 225kSPS,
-1dB FSR Digital Input,
Measurement Bandwidth = 20kHz
86
THD
SNR (dB)
-40
THD (dB)
2.5
84
2.0
76
1.5
72
1.0
68
0.5
60
0
64
0
0
-60
84
2nd Harmonic
82
-80
3rd Harmonic
80
-100
0
18
1
2
3
4
5
0
1
2
3
fOUT (kHz)
fOUT (kHz)
Figure 58.
Figure 59.
Submit Documentation Feedback
4
5
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +2.7V (continued)
At TA = 25°C, and AVDD = +2.7V, unless otherwise noted.
CLOCK FEEDTHROUGH
2.7V, 20MHz, MIDSCALE
POWER SPECTRAL DENSITY
0
AVDD = 2.7V,
fOUT = 1kHz, fS = 225kSPS,
Measurement Bandwidth = 20kHz
VOUT (500mV/div)
20
Gain (dB)
-40
-60
-80
-100
AVDD = 2.7V
Clock Feedthrough Impulse ~0.4nV-s
-120
-140
0
5
10
15
Time (5ms/div)
20
Frequency (kHz)
Figure 60.
Figure 61.
GLITCH ENERGY
2.7V, 16-BIT, 1LSB STEP, RISING EDGE
GLITCH ENERGY
2.7V, 16-BIT, 1LSB STEP, FALLING EDGE
AVDD = 2.7V
From Code: 8000h
To Code: 7FFFh
Glitch Impulse
< 0.3nV-s
Clock
Feedthrough
~0.4nV-s
VOUT (100mV/div)
VOUT (100mV/div)
AVDD = 2.7V
From Code: 7FFFh
To Code: 8000h
Glitch Impulse
< 0.3nV-s
Clock
Feedthrough
~0.4nV-s
Time (5ms/div)
Time (5ms/div)
Figure 62.
Figure 63.
GLITCH ENERGY
2.7V, 14-BIT, 1LSB STEP, RISING EDGE
GLITCH ENERGY
2.7V, 14-BIT, 1LSB STEP, FALLING EDGE
AVDD = 2.7V
From Code: 2001h
To Code: 2000h
Glitch Impulse
< 0.3nV-s
Clock
Feedthrough
~0.4nV-s
VOUT (100mV/div)
VOUT (100mV/div)
AVDD = 2.7V
From Code: 2000h
To Code: 2001h
Clock
Feedthrough
~0.4nV-s
Time (5ms/div)
Glitch Impulse
< 0.3nV-s
Time (5ms/div)
Figure 64.
Figure 65.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
19
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +2.7V (continued)
At TA = 25°C, and AVDD = +2.7V, unless otherwise noted.
FULL-SCALE SETTLING TIME
2.7V RISING EDGE
FULL-SCALE SETTLING TIME
2.7V FALLING EDGE
AVDD = 2.7V
From Code: 0000h
To Code: FFFFh
AVDD = 2.7V
From Code: FFFFh
To Code: 0000h
Falling Edge
1V/div
Rising Edge
1V/div
Zoomed Rising Edge
100mV/div
Zoomed Falling Edge
100mV/div
Trigger
Pulse
2.7V/div
Trigger Pulse 2.7V/div
Time (2ms/div)
Time (2ms/div)
Figure 66.
Figure 67.
HALF-SCALE SETTLING TIME
2.7V RISING EDGE
HALF-SCALE SETTLING TIME
2.7V FALLING EDGE
AVDD = 2.7V
From Code: 4000h
To Code: C000h
AVDD = 2.7V
From Code: C000h
To Code: 4000h
Falling
Edge
1V/div
Rising
Edge
1V/div
Zoomed Rising Edge
100mV/div
Trigger
Pulse
2.7V/div
Trigger
Pulse
2.7V/div
Time (2ms/div)
Time (2ms/div)
Figure 69.
POWER-ON RESET TO 0V
POWER-ON GLITCH
POWER-OFF GLITCH
17mV
AVDD = 2.7V
DAC = Zero Scale
Load = 200pF || 10kW
VOUT (20mV/div)
AVDD = 2.7V
DAC = Zero Scale
Load = 200pF || 10kW
AVDD (1V/div)
Figure 68.
AVDD (1V/div)
VOUT (20mV/div)
20
Zoomed Falling Edge
100mV/div
Time (5ms/div)
Time (10ms/div)
Figure 70.
Figure 71.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +1.8V
At TA = 25°C, and AVDD = +1.8V, unless otherwise noted.
6
4
2
0
-2
-4
-6
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (–40°C)
2
AVDD = 1.8V
LE (LSB)
LE (LSB)
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(–40°C)
-2
0.2
DLE (LSB)
DLE (LSB)
0.5
0
-0.5
8192
16384 24576 32768 40960 49152
0
-0.1
0
57344 65536
2048
4096
6144
8192
10240 12288
14336 16384
Digital Input Code
Digital Input Code
Figure 72.
Figure 73.
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+25°C)
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+25°C)
6
4
2
0
-2
-4
-6
2
AVDD = 1.8V
LE (LSB)
LE (LSB)
0
AVDD = 1.8V
1
0
-1
-2
0.2
DLE (LSB)
1.0
DLE (LSB)
0.1
-0.2
-1.0
0.5
0
-0.5
0.1
0
-0.1
-0.2
-1.0
0
8192
16384 24576 32768 40960 49152
0
57344 65536
2048
4096
6144
8192
10240 12288
14336 16384
Digital Input Code
Digital Input Code
Figure 74.
Figure 75.
DAC8411 16-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+125°C)
DAC8311 14-BIT LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE (+125°C)
6
4
2
0
-2
-4
-6
2
AVDD = 1.8V
LE (LSB)
LE (LSB)
0
-1
1.0
AVDD = 1.8V
1
0
-1
-2
0.2
DLE (LSB)
1.0
DLE (LSB)
AVDD = 1.8V
1
0.5
0
-0.5
0.1
0
-0.1
-0.2
-1.0
0
8192
16384 24576 32768 40960 49152
57344 65536
0
2048
4096
6144
8192
10240 12288
Digital Input Code
Digital Input Code
Figure 76.
Figure 77.
14336 16384
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
21
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +1.8V (continued)
At TA = 25°C, and AVDD = +1.8V, unless otherwise noted.
ZERO-CODE ERROR
vsTEMPERATURE
SOURCE CURRENT
AT POSITIVE RAIL
1.2
2.0
AVDD = 1.8V
1.8
Analog Output Voltage (V)
Zero-Code Error (mV)
1.0
0.8
0.6
0.4
0.2
1.6
1.4
1.2
1.0
0.8
0
-40 -25 -10
AVDD = 1.8V
DAC Loaded with FFFFh
0.6
5
20
35
50
65
80
95
110 125
0
2
Temperature (°C)
Figure 78.
Figure 79.
OFFSET ERROR
vs TEMPERATURE
SINK CURRENT
AT NEGATIVE RAIL
0.6
Analog Output Voltage (V)
Offset Error (mV)
8
6
8
AVDD = 1.8V
DAC Loaded with 0000h
0.4
0.2
0
-0.2
-0.4
-0.6
-40 -25 -10
0.4
0.2
0
5
20
35
50
65
80
95
110 125
0
2
Temperature (°C)
4
ISINK (mA)
Figure 80.
Figure 81.
FULL-SCALE ERROR
vs TEMPERATURE
POWER-SUPPLY CURRENT
vs DIGITAL INPUT CODE
100
0.06
AVDD = 1.8V
AVDD = 1.8V
Power-Supply Current (mA)
0.04
Full-Scale Error (mV)
6
0.6
AVDD = 1.8V
0.02
0
-0.02
-0.04
-0.06
-40 -25 -10
90
80
70
60
50
5
20
35
50
65
80
95
110 125
0
8192 16384 24576 32768 40960 49152 57344 65536
Digital Input Code
Temperature (°C)
Figure 82.
22
4
ISOURCE (mA)
Figure 83.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +1.8V (continued)
At TA = 25°C, and AVDD = +1.8V, unless otherwise noted.
POWER-SUPPLY CURRENT
vs TEMPERATURE
POWER-DOWN CURRENT
vs TEMPERATURE
110
0.8
AVDD = 1.8V
100
Quiescent Current (mA)
90
80
70
60
-40 -25 -10
5
20
35
50
65
80
95
0.2
5
20
35
50
65
80
95
Temperature (°C)
Temperature (°C)
Figure 84.
Figure 85.
POWER-SUPPLY CURRENT
vs LOGIC INPUT VOLTAGE
POWER-SUPPLY CURRENT
HISTOGRAM
50
SYNC Input (all other digital inputs = GND)
110 125
AVDD = 1.8V
45
40
150
35
Occurrences
Sweep from
0V to 1.8V
100
30
25
20
15
50
10
Sweep from
1.8V to 0V
5
VLOGIC (V)
IDD (mA)
Figure 86.
Figure 87.
TOTAL HARMONIC DISTORTION
vs OUTPUT FREQUENCY
SIGNAL-TO-NOISE RATIO
vs OUTPUT FREQUENCY
116
120
108
112
100
104
92
96
84
2.0
88
1.5
76
1.0
80
0.5
60
0
68
0
0
72
Power-Supply Current (mA)
0.4
0
-40 -25 -10
110 125
200
86
-20
AVDD = 1.8V, fS = 225kSPS,
-1dB FSR Digital Input,
Measurement Bandwidth = 20kHz
AVDD = 1.8V, fS = 225kSPS,
-1dB FSR Digital Input,
Measurement Bandwidth = 20kHz
THD
84
SNR (dB)
-40
THD (dB)
0.6
64
Power-Supply Current (mA)
AVDD = 1.8V
-60
-80
82
80
2nd Harmonic
78
-100
3rd Harmonic
76
-120
0
1
2
3
4
5
0
1
2
3
fOUT (kHz)
fOUT (kHz)
Figure 88.
Figure 89.
4
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
5
23
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS: AVDD = +1.8V (continued)
At TA = 25°C, and AVDD = +1.8V, unless otherwise noted.
CLOCK FEEDTHROUGH
1.8V, 20MHz, MIDSCALE
POWER SPECTRAL DENSITY
0
AVDD = 1.8V,
fOUT = 1kHz, fS = 225kSPS,
Measurement Bandwidth = 20kHz
VOUT (500mV/div)
20
Gain (dB)
-40
-60
-80
-100
AVDD = 1.8V
Clock Feedthrough Impulse ~0.34nV-s
-120
-140
0
5
10
15
Time (5ms/div)
20
Frequency (kHz)
Figure 90.
Figure 91.
GLITCH ENERGY
1.8V, 16-BIT, 1LSB STEP, RISING EDGE
GLITCH ENERGY
1.8V, 16-BIT, 1LSB STEP, FALLING EDGE
AVDD = 1.8V
From Code: 8000h
To Code: 7FFFh
Glitch Impulse
< 0.2nV-s
Clock
Feedthrough
~0.3nV-s
VOUT (100mV/div)
VOUT (100mV/div)
AVDD = 1.8V
From Code: 7FFFh
To Code: 8000h
Clock
Feedthrough
~0.3nV-s
Time (5ms/div)
Time (5ms/div)
Figure 92.
Figure 93.
GLITCH ENERGY
1.8V, 14-BIT, 1LSB STEP, RISING EDGE
GLITCH ENERGY
1.8V, 14-BIT, 1LSB STEP, FALLING EDGE
AVDD = 1.8V
From Code: 2000h
To Code: 2001h
AVDD = 1.8V
From Code: 2001h
To Code: 2000h
VOUT (100mV/div)
VOUT (100mV/div)
Glitch Impulse
< 0.2nV-s
Clock
Feedthrough
~0.3nV-s
Clock
Feedthrough
~0.3nV-s
Time (5ms/div)
Glitch Impulse
< 0.2nV-s
Time (5ms/div)
Figure 94.
24
Glitch Impulse
< 0.2nV-s
Figure 95.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
TYPICAL CHARACTERISTICS: AVDD = +1.8V (continued)
At TA = 25°C, and AVDD = +1.8V, unless otherwise noted.
FULL-SCALE SETTLING TIME
1.8V RISING EDGE
FULL-SCALE SETTLING TIME
1.8V FALLING EDGE
AVDD = 1.8V
From Code: 0000h
To Code: FFFFh
AVDD = 1.8V
From Code: FFFFh
To Code: 0000h
Falling Edge
1V/div
Zoomed Rising Edge
100mV/div
Rising Edge
1V/div
Zoomed Falling Edge
100mV/div
Trigger
Pulse
1.8V/div
Trigger Pulse 1.8V/div
Time (2ms/div)
Time (2ms/div)
Figure 96.
Figure 97.
HALF-SCALE SETTLING TIME
1.8V RISING EDGE
HALF-SCALE SETTLING TIME
1.8V FALLING EDGE
AVDD = 1.8V
From Code: 4000h
To Code: C000h
AVDD = 1.8V
From Code: C000h
To Code: 4000h
Falling
Edge
1V/div
Rising
Edge
1V/div
Zoomed Rising Edge
100mV/div
Zoomed Falling Edge
100mV/div
Trigger
Pulse
1.8V/div
Trigger Pulse 1.8V/div
Time (2ms/div)
POWER-ON RESET TO 0V
POWER-ON GLITCH
POWER-OFF GLITCH
4mV
AVDD = 1.8V
DAC = Zero Scale
Load = 200pF || 10kW
VOUT (20mV/div)
AVDD = 1.8V
DAC = Zero Scale
Load = 200pF || 10kW
AVDD (1V/div)
Figure 99.
AVDD (1V/div)
VOUT (20mV/div)
Time (2ms/div)
Figure 98.
Time (10ms/div)
Time (5ms/div)
Figure 100.
Figure 101.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
25
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
THEORY OF OPERATION
DAC SECTION
VREF
The DAC8311 and DAC8411 are fabricated using TI's
proprietary HPA07 process technology. The
architecture consists of a string DAC followed by an
output buffer amplifier. Because there is no reference
input pin, the power supply (AVDD) acts as the
reference. Figure 102 shows a block diagram of the
DAC architecture.
RDIVIDER
VREF
2
R
AVDD
To Output
Amplifier
R
REF (+)
DAC Register
VOUT
Resistor String
Output
Amplifier
GND
Figure 102. DAC8x11 Architecture
R
The input coding to the DAC8311 and DAC8411 is
straight binary, so the ideal output voltage is given by:
D
V OUT + AVDD
2n
Where:
n = resolution in bits; either 14 (DAC8311) or 16
(DAC8411).
D = decimal equivalent of the binary code that is
loaded to the DAC register; it ranges from 0 to
16,383 for the 14-bit DAC8311, or 0 to 65,535 for
the 16-bit DAC8411.
RESISTOR STRING
The resistor string section is shown in Figure 103. It
is simply a string of resistors, each of value R. The
code loaded into the DAC register determines at
which node on the string the voltage is tapped off to
be fed into the output amplifier by closing one of the
switches connecting the string to the amplifier. It is
tested monotonic because it is a string of resistors.
26
R
Figure 103. Resistor String
OUTPUT AMPLIFIER
The output buffer amplifier is capable of generating
rail-to-rail voltages on its output which gives an output
range of 0V to AVDD. It is capable of driving a load of
2kΩ in parallel with 1000pF to GND. The source and
sink capabilities of the output amplifier can be seen in
the Typical Characteristics section for each device.
The slew rate is 0.7V/µs with a half-scale settling time
of typically 6µs with the output unloaded.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
SERIAL INTERFACE (for 14-Bit DAC8311)
The DAC8311 has a 3-wire serial interface (SYNC,
SCLK, and DIN) compatible with SPI, QSPI, and
Microwire interface standards, as well as most DSPs.
See the 14-bit Serial Write Operation timing diagram
for an example of a typical write sequence.
At this point, the SYNC line may be kept low or
brought high. In either case, it must be brought high
for a minimum of 20ns before the next write
sequence so that a falling edge of SYNC can initiate
the next write sequence. As previously mentioned, it
must be brought high again before the next write
sequence.
DAC8311 Input Shift Register
DAC8311 SYNC Interrupt
The input shift register is 16 bits wide, as shown in
Table 2. The first two bits (PD0 and PD1) are
reserved control bits that set the desired mode of
operation (normal mode or any one of three
power-down modes) as indicated in Table 4.
In a normal write sequence, the SYNC line is kept
low for at least 16 falling edges of SCLK and the DAC
is updated on the 16th falling edge. However,
bringing SYNC high before the 16th falling edge acts
as an interrupt to the write sequence. The shift
register is reset and the write sequence is seen as
invalid. Neither an update of the DAC register
contents or a change in the operating mode occurs,
as shown in Figure 104.
The write sequence begins by bringing the SYNC line
low. Data from the DIN line are clocked into the 16-bit
shift register on each falling edge of SCLK. The serial
clock frequency can be as high as 50MHz, making
the DAC8311 compatible with high-speed DSPs. On
the 16th falling edge of the serial clock, the last data
bit is clocked in and the programmed function is
executed.
Table 2. DAC8311 Data Input Register
DB15
DB14
PD1
PD0
DB0
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
CLK
SYNC
DIN
DB15
DB0
Invalid Write Sequence:
SYNC HIGH before 16th Falling Edge
DB15
DB0
Valid Write Sequence:
Output Updates on 16th Falling Edge
Figure 104. DAC8311 SYNC Interrupt Facility
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
27
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
SERIAL INTERFACE (for 16-Bit DAC8411)
The DAC8411 has a 3-wire serial interface (SYNC,
SCLK, and DIN) compatible with SPI, QSPI, and
Microwire interface standards, as well as most DSPs.
See the 16-bit Serial Write Operation timing diagram
for an example of a typical write sequence.
At this point, the SYNC line may be kept low or
brought high. In either case, it must be brought high
for a minimum of 20ns before the next write
sequence so that a falling edge of SYNC can initiate
the next write sequence. As previously mentioned, it
must be brought high again before the next write
sequence.
DAC8411 Input Shift Register
The SYNC line may be brought high after the 18th bit
is clocked in because the last six bits are don't care.
The input shift register is 24 bits wide, as shown in
Table 3. The first two bits are reserved control bits
(PD0 and PD1) that set the desired mode of
operation (normal mode or any one of three
power-down modes) as indicated in Table 4. The last
six bits are don't care.
DAC8411 SYNC Interrupt
In a normal write sequence, the SYNC line is kept
low for 24 falling edges of SCLK and the DAC is
updated on the 18th falling edge, ignoring the last six
don't care bits. However, bringing SYNC high before
the 18th falling edge acts as an interrupt to the write
sequence. The shift register is reset and the write
sequence is seen as invalid. Neither an update of the
DAC register contents or a change in the operating
mode occurs, as shown in Figure 105.
The write sequence begins by bringing the SYNC line
low. Data from the DIN line are clocked into the 24-bit
shift register on each falling edge of SCLK. The serial
clock frequency can be as high as 50MHz, making
the DAC8411 compatible with high-speed DSPs. On
the 18th falling edge of the serial clock, the last data
bit is clocked in and the programmed function is
executed. The last six bits are don't care.
Table 3. DAC8411 Data Input Register
DB23
PD1
DB7 DB6 DB5
PD0
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
18th Falling Edge
CLK
18
X
DB0
X
X
X
X
X
18th/24th Falling Edge
24
18
24
SYNC
DIN
DB23
DB6
DB5
DB0
DB23
Invalid/Interrupted Write Sequence:
Output/Mode Does Not Update on the 18th Falling Edge
DB6
DB5
DB0
Valid Write Sequence:
Output/Mode Updates on the 18th or 24th Falling Edge
Figure 105. DAC8411 SYNC Interrupt Facility
28
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
POWER-ON RESET TO ZERO-SCALE
The DAC8x11 contains a power-on reset circuit that
controls the output voltage during power-up. On
power-up, the DAC register is filled with zeros and
the output voltage is 0V. The DAC register remains
that way until a valid write sequence is made to the
DAC. This design is useful in applications where it is
important to know the state of the output of the DAC
while it is in the process of powering up.
power-down mode. There are three different options.
The output is connected internally to GND either
through a 1kΩ resistor or a 100kΩ resistor, or is left
open-circuited (High-Z). See Figure 106 for the output
stage.
Amplifier
Resistor
String DAC
The occuring power-on glitch impulse is only a few
mV (typically, 17mV; see Figure 29, Figure 70, or
Figure 100).
VOUT
Power-down
Circuitry
Resistor
Network
POWER-DOWN MODES
The DAC8x11 contains four separate modes of
operation. These modes are programmable by setting
two bits (PD1 and PD0) in the control register.
Table 4 shows how the state of the bits corresponds
to the mode of operation of the device.
Table 4. Modes of Operation for the DAC8x11
OPERATING MODE
Figure 106. Output Stage During Power-Down
All linear circuitry is shut down when the power-down
mode is activated. However, the contents of the DAC
register are unaffected when in power-down. The
time to exit power-down is typically 50µs for AVDD =
5V and AVDD = 3V. See the Typical Characteristics
section for each device for more information.
PD1
PD0
0
0
0
1
Output 1kΩ to GND
DAC NOISE PERFORMANCE
1
0
Output 100kΩ to GND
1
1
High-Z
Typical noise performance for the DAC8x11 is shown
in Figure 31 and Figure 32. Output noise spectral
density at the VOUT pin versus frequency is depicted
in Figure 31 for full-scale, midscale, and zero-scale
input codes. The typical noise density for midscale
code is 110nV/√Hz at 1kHz and at 1MHz.
Normal Operation
Power-Down Modes
When both bits are set to 0, the device works
normally with a standard power consumption of
typically 80µA at 1.8V. However, for the three
power-down modes, the typical supply current falls to
0.5µA at 5V, 0.4µA at 3V, and 0.1µA at 1.8V. Not
only does the supply current fall, but the output stage
is also internally switched from the output of the
amplifier to a resistor network of known values. The
advantage of this architecture is that the output
impedance of the part is known while the part is in
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
29
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
APPLICATION INFORMATION
USING THE REF5050 AS A POWER SUPPLY
FOR THE DAC8x11
As a result of the extremely low supply current
required by the DAC8x11, an alternative option is to
use a REF5050 +5V precision voltage reference to
supply the required voltage to the part, as shown in
Figure 107. This option is especially useful if the
power supply is too noisy or if the system supply
voltages are at some value other than 5V. The
REF5050 outputs a steady supply voltage for the
DAC8x11. If the REF5050 is used, the current
needed to supply DAC8x11 is typically 110µA at 5V,
with no load on the output of the DAC. When the
DAC output is loaded, the REF5050 also needs to
supply the current to the load. The total current
required (with a 5kΩ load on the DAC output) is:
110µA + (5V/5kΩ) = 1.11mA
The load regulation of the REF5050 is typically
0.002%/mA, resulting in an error of 90µV for the
1.11mA current drawn from it. This value corresponds
to a 1.1LSB error at 16bit (DAC8411).
The DAC8x11 has been designed for single-supply
operation but a bipolar output range is also possible
using the circuit in Figure 108. The circuit shown
gives an output voltage range of ±5V. Rail-to-rail
operation at the amplifier output is achievable using
an OPA211, OPA340, or OPA703 as the output
amplifier. For a full list of available operational
amplifiers from TI, see TI web site at www.ti.com
The output voltage for any input code can be
calculated as follows:
VO +
ƪ
AVDD
ǒ
R1 ) R 2
ǒ2DnǓ
R1
Ǔ
* AV DD
ǒ Ǔƫ
R2
R1
(1)
Where:
n = resolution in bits; either 14 (DAC8311) or 16
(DAC8411).
D = the input code in decimal; either 0 to 16,383
(DAC8311) or 0 to 65,535 (DAC8411).
With AVDD = 5V, R1 = R2 = 10kΩ:
+5.5V
ǒ
REF5050
1m F
(2)
This is an output voltage range of ±5V with 0000h
(16-bit level) corresponding to a –5V output and
FFFFh (16-bit level) corresponding to a +5V output.
110mA
SYNC
SCLK
Ǔ
V O + 10 n D *5V
2
+5V
Three-Wire
Serial
Interface
BIPOLAR OPERATION USING THE DAC8x11
VOUT = 0V to 5V
R2
10kW
+5V
DAC8x11
DIN
+5.5V
R1
10kW
OPA211
VOUT
Figure 107. REF5050 as Power Supply to
DAC8x11
For other power-supply voltages, alternative
references such as the REF3030 (3V), REF3033
(3.3V), or REF3220 (2.048V) are recommended. For
a full list of available voltage references from TI, see
TI web site at www.ti.com.
30
AVDD
10mF
±5V
DAC8x11
- 5.5V
0.1mF
Three-Wire
Serial
Interface
Figure 108. Bipolar Operation with the DAC8x11
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
MICROPROCESSOR INTERFACING
DAC8x11(1)
Microwire
DAC8x11 to 8051 Interface
CS
SYNC
Figure 109 shows a serial interface between the
DAC8x11 and a typical 8051-type microcontroller.
The setup for the interface is as follows: TXD of the
8051 drives SCLK of the DAC8x11, while RXD drives
the serial data line of the part. The SYNC signal is
derived from a bit programmable pin on the port. In
this case, port line P3.3 is used. When data are to be
transmitted to the DAC8x11, P3.3 is taken low. The
8051 transmits data only in 8-bit bytes; thus, only
eight falling clock edges occur in the transmit cycle.
To load data to the DAC, P3.3 remains low after the
first eight bits are transmitted, and a second write
cycle is initiated to transmit the second byte of data.
P3.3 is taken high following the completion of this
cycle. The 8051 outputs the serial data in a format
which has the LSB first. The DAC8x11 requires its
data with the MSB as the first bit received. Therefore,
the 8051 transmit routine must take this requirement
into account, and mirror the data as needed.
SK
SCLK
SO
DIN
80C51/80L51
(1)
DAC8x11
P3.3
SYNC
TXD
SCLK
RXD
DIN
(1)
NOTE: (1) Additional pins omitted for clarity.
Figure 110. DAC8x11 to Microwire Interface
DAC8x11 to 68HC11 Interface
Figure 111 shows a serial interface between the
DAC8x11 and the 68HC11 microcontroller. SCK of
the 68HC11 drives the SCLK of the DAC8x11, while
the MOSI output drives the serial data line of the
DAC. The SYNC signal is derived from a port line
(PC7), similar to what was done for the 8051.
DAC8x11(1)
68HC11(1)
PC7
SYNC
SCK
SCLK
MOSI
DIN
NOTE: (1) Additional pins omitted for clarity.
Figure 111. DAC8x11 to 68HC11 Interface
NOTE: (1) Additional pins omitted for clarity.
Figure 109. DAC8x11 to 80C51/80L51 Interfaces
DAC8x11 to Microwire Interface
Figure 110 shows an interface between the DAC8x11
and any Microwire-compatible device. Serial data are
shifted out on the falling edge of the serial clock and
are clocked into the DAC8x11 on the rising edge of
the SK signal.
The 68HC11 should be configured so that its CPOL
bit is a '0' and its CPHA bit is a '1'. This configuration
causes data appearing on the MOSI output to be
valid on the falling edge of SCK. When data are
being transmitted to the DAC, the SYNC line is taken
low (PC7). Serial data from the 68HC11 are
transmitted in 8-bit bytes with only eight falling clock
edges occurring in the transmit cycle. Data are
transmitted MSB first. In order to load data to the
DAC8x11, PC7 is held low after the first eight bits are
transferred, and a second serial write operation is
performed to the DAC; PC7 is taken high at the end
of this procedure.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
31
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
LAYOUT
A precision analog component requires careful layout,
adequate bypassing, and clean, well-regulated power
supplies.
The DAC8x11 offers single-supply operation; it will
often be used in close proximity with digital logic,
microcontrollers, microprocessors, and digital signal
processors. The more digital logic present in the
design and the higher the switching speed, the more
difficult it will be to achieve good performance from
the converter.
Because of the single ground pin of the DAC8x11, all
return currents, including digital and analog return
currents, must flow through the GND pin. Ideally,
GND would be connected directly to an analog
ground plane. This plane would be separate from the
ground connection for the digital components until
they were connected at the power entry point of the
system.
32
The power applied to AVDD should be well-regulated
and low-noise. Switching power supplies and dc/dc
converters often have high-frequency glitches or
spikes riding on the output voltage. In addition, digital
components can create similar high-frequency spikes
as the internal logic switches state. This noise can
easily couple into the DAC output voltage through
various paths between the power connections and
analog output. This condition is particularly true for
the DAC8x11, as the power supply is also the
reference voltage for the DAC.
As with the GND connection, AVDD should be
connected to a +5V power supply plane or trace that
is separate from the connection for digital logic until
they are connected at the power entry point. In
addition, the 1µF to 10µF and 0.1µF bypass
capacitors are strongly recommended. In some
situations, additional bypassing may be required,
such as a 100µF electrolytic capacitor or even a Pi
filter made up of inductors and capacitors—all
designed to essentially low-pass filter the +5V supply,
removing the high-frequency noise.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
PARAMETER DEFINITIONS
With the increased complexity of many different
specifications listed in product data sheets, this
section summarizes selected specifications related to
digital-to-analog converters.
STATIC PERFORMANCE
Static performance parameters are specifications
such as differential nonlinearity (DNL) or integral
nonlinearity (INL). These are dc specifications and
provide information on the accuracy of the DAC. They
are most important in applications where the signal
changes slowly and accuracy is required.
Resolution
Generally, the DAC resolution can be expressed in
different forms. Specifications such as IEC 60748-4
recognize the numerical, analog, and relative
resolution. The numerical resolution is defined as the
number of digits in the chosen numbering system
necessary to express the total number of steps of the
transfer characteristic, where a step represents both
a digital input code and the corresponding discrete
analogue output value. The most commonly-used
definition of resolution provided in data sheets is the
numerical resolution expressed in bits.
Least Significant Bit (LSB)
The least significant bit (LSB) is defined as the
smallest value in a binary coded system. The value of
the LSB can be calculated by dividing the full-scale
output voltage by 2n, where n is the resolution of the
converter.
Most Significant Bit (MSB)
The most significant bit (MSB) is defined as the
largest value in a binary coded system. The value of
the MSB can be calculated by dividing the full-scale
output voltage by 2. Its value is one-half of full-scale.
Relative Accuracy or Integral Nonlinearity (INL)
Relative accuracy or integral nonlinearity (INL) is
defined as the maximum deviation between the real
transfer function and a straight line passing through
the endpoints of the ideal DAC transfer function. INL
is measured in LSBs.
Full-Scale Error
Full-scale error is defined as the deviation of the real
full-scale output voltage from the ideal output voltage
while the DAC register is loaded with the full-scale
code (0xFFFF). Ideally, the output should be VDD – 1
LSB. The full-scale error is expressed in percent of
full-scale range (%FSR).
Offset Error
Offset error is defined as the difference between
actual output voltage and the ideal output voltage in
the linear region of the transfer function. This
difference is calculated by using a straight line
defined by two codes (for example, for 16-bit
resolution, codes 485 and 64714). Since the offset
error is defined by a straight line, it can have a
negative or positve value. Offset error is measured in
mV.
Zero-Code Error
Zero-code error is defined as the DAC output voltage,
when all '0's are loaded into the DAC register.
Zero-scale error is a measure of the difference
between actual output voltage and ideal output
voltage (0V). It is expressed in mV. It is primarily
caused by offsets in the output amplifier.
Gain Error
Gain error is defined as the deviation in the slope of
the real DAC transfer characteristic from the ideal
transfer function. Gain error is expressed as a
percentage of full-scale range (%FSR).
Full-Scale Error Drift
Full-scale error drift is defined as the change in
full-scale error with a change in temperature.
Full-scale error drift is expressed in units of
%FSR/°C.
Offset Error Drift
Offset error drift is defined as the change in offset
error with a change in temperature. Offset error drift
is expressed in µV/°C.
Zero-Code Error Drift
Differential Nonlinearity (DNL)
Differential nonlinearity (DNL) is defined as the
maximum deviation of the real LSB step from the
ideal 1LSB step. Ideally, any two adjacent digital
codes correspond to output analog voltages that are
exactly one LSB apart. If the DNL is within ±1LSB,
the DAC is said to be monotonic.
Zero-code error drift is defined as the change in
zero-code error with a change in temperature.
Zero-code error drift is expressed in µV/°C.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
33
DAC8311
DAC8411
SBAS439 – AUGUST 2008 ................................................................................................................................................................................................ www.ti.com
Gain Temperature Coefficient
Digital Feedthrough
The gain temperature coefficient is defined as the
change in gain error with changes in temperature.
The gain temperature coefficient is expressed in ppm
of FSR/°C.
Digital feedthrough is defined as impulse seen at the
output of the DAC from the digital inputs of the DAC.
It is measured when the DAC output is not updated. It
is specified in nV-s, and measured with a full-scale
code change on the data bus; that is, from all '0's to
all '1's and vice versa.
Power-Supply Rejection Ratio (PSRR)
Power-supply rejection ratio (PSRR) is defined as the
ratio of change in output voltage to a change in
supply voltage for a full-scale output of the DAC. The
PSRR of a device indicates how the output of the
DAC is affected by changes in the supply voltage.
PSRR is measured in decibels (dB).
Monotonicity
Monotonicity is defined as a slope whose sign does
not change. If a DAC is monotonic, the output
changes in the same direction or remains at least
constant for each step increase (or decrease) in the
input code.
Channel-to-Channel DC Crosstalk
Channel-to-channel dc crosstalk is defined as the dc
change in the output level of one DAC channel in
response to a change in the output of another DAC
channel. It is measured with a full-scale output
change on one DAC channel while monitoring
another DAC channel remains at midscale. It is
expressed in LSB.
Channel-to-Channel AC Crosstalk
Dynamic performance parameters are specifications
such as settling time or slew rate, which are important
in applications where the signal rapidly changes
and/or high frequency signals are present.
AC crosstalk in a multi-channel DAC is defined as the
amount of ac interference experienced on the output
of a channel at a frequency (f) (and its harmonics),
when the output of an adjacent channel changes its
value at the rate of frequency (f). It is measured with
one channel output oscillating with a sine wave of
1kHz frequency, while monitoring the amplitude of
1kHz harmonics on an adjacent DAC channel output
(kept at zero scale). It is expressed in dB.
Slew Rate
Signal-to-Noise Ratio (SNR)
The output slew rate (SR) of an amplifier or other
electronic circuit is defined as the maximum rate of
change of the output voltage for all possible input
signals.
Signal-to-noise ratio (SNR) is defined as the ratio of
the root mean-squared (RMS) value of the output
signal divided by the RMS values of the sum of all
other spectral components below one-half the output
frequency, not including harmonics or dc. SNR is
measured in dB.
DYNAMIC PERFORMANCE
SR = max
DVOUT(t)
Dt
(3)
Where ΔVOUT(t) is the output produced by the
amplifier as a function of time t.
Output Voltage Settling Time
Settling time is the total time (including slew time) for
the DAC output to settle within an error band around
its final value after a change in input. Settling times
are specified to within ±0.003% (or whatever value is
specified) of full-scale range (FSR).
Code Change/Digital-to-Analog Glitch Energy
Digital-to-analog glitch impulse is the impulse injected
into the analog output when the input code in the
DAC register changes state. It is normally specified
as the area of the glitch in nanovolts-second (nV-s),
and is measured when the digital input code is
changed by 1LSB at the major carry transition.
34
Total Harmonic Distortion (THD)
Total harmonic distortion + noise is defined as the
ratio of the RMS values of the harmonics and noise
to the value of the fundamental frequency. It is
expressed in a percentage of the fundamental
frequency amplitude at sampling rate fS.
Spurious-Free Dynamic Range (SFDR)
Spurious-free dynamic range (SFDR) is the usable
dynamic range of a DAC before spurious noise
interferes or distorts the fundamental signal. SFDR is
the measure of the difference in amplitude between
the fundamental and the largest harmonically or
non-harmonically related spur from dc to the full
Nyquist bandwidth (half the DAC sampling rate, or
fS/2). A spur is any frequency bin on a spectrum
analyzer, or from a Fourier transform, of the analog
output of the DAC. SFDR is specified in decibels
relative to the carrier (dBc).
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
DAC8311
DAC8411
www.ti.com ................................................................................................................................................................................................ SBAS439 – AUGUST 2008
Signal-to-Noise plus Distortion (SINAD)
DAC Output Noise
SINAD includes all the harmonic and outstanding
spurious components in the definition of output noise
power in addition to quantizing any internal random
noise power. SINAD is expressed in dB at a specified
input frequency and sampling rate, fS.
DAC output noise is defined as any voltage deviation
of DAC output from the desired value (within a
particular frequency band). It is measured with a DAC
channel kept at midscale while filtering the output
voltage within a band of 0.1Hz to 10Hz and
measuring its amplitude peaks. It is expressed in
terms of peak-to-peak voltage (Vpp).
DAC Output Noise Density
Output
noise
density
is
defined
as
internally-generated random noise. Random noise is
characterized as a spectral density (nV/√Hz). It is
measured by loading the DAC to midscale and
measuring noise at the output.
Full-Scale Range (FSR)
Full-scale range (FSR) is the difference between the
maximum and minimum analog output values that the
DAC is specified to provide; typically, the maximum
and minimum values are also specified. For an n-bit
DAC, these values are usually given as the values
matching with code 0 and 2n – 1.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): DAC8311 DAC8411
35
PACKAGE OPTION ADDENDUM
www.ti.com
13-Nov-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
DAC8311IDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8311IDCKRG4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8311IDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8311IDCKTG4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8411IDCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8411IDCKRG4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8411IDCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
DAC8411IDCKTG4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
6-Nov-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
DAC8311IDCKR
SC70
DCK
6
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
3000
177.8
9.7
2.3
2.52
1.2
4.0
8.0
Q3
DAC8311IDCKT
SC70
DCK
6
250
177.8
9.7
2.3
2.52
1.2
4.0
8.0
Q3
DAC8411IDCKR
SC70
DCK
6
3000
177.8
9.7
2.3
2.52
1.2
4.0
8.0
Q3
DAC8411IDCKT
SC70
DCK
6
250
177.8
9.7
2.3
2.52
1.2
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
6-Nov-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
DAC8311IDCKR
SC70
DCK
6
3000
184.0
184.0
50.0
DAC8311IDCKT
SC70
DCK
6
250
184.0
184.0
50.0
DAC8411IDCKR
SC70
DCK
6
3000
184.0
184.0
50.0
DAC8411IDCKT
SC70
DCK
6
250
184.0
184.0
50.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated