SanRex® Fast & Soft Recovery Diode DBA200UA40 IF(AV)= 2x100A, V RRM=400V, trr=100ns SanRex Fast & Soft Recovery Diode Module DBA200UA40 is designed for applications requiring fast switching and soft recovery wave shape to reduce or eliminate the need for snubber components in the circuit. The modules are isolated for easy mounting with other components or a common heatsink. Features * Very Fast Reverse Recovery Time * Soft Recovery Characteristics * Low Forward Voltage Drop * Compact isolated SOT-227 package Isolated SOT-227 Package Typical Applications * Welding and Plasma Cutting Machines * DC chopper * Rectifier in Switch Mode Power Supplies (SMPS) * Uninterruptible Power Supplies (UPS) * Free Wheeling Diode in converters and motor control circuits Internal schematic diagram ° < Maximum Ratings > Symbol Item VRRM VR(DC) IF(AV) IFSM I2t Tj Tstg VISO Repetitive Peak Reverse Voltage Reverse D.C. Voltage Average Forward Current Surge Forward Current I 2 t (for fusing) Junction Temperature Conditions Tj = 25 C (unless otherwise noted) per diode Ratings Unit D.C., T C = 96°C ½ cycle, 60Hz, Peak value, non-repetitive Value for one cycle surge current Storage Temperature Isolation Voltage (R.M.S.) Mounting Mounting M4 Torque Terminal M4 A.C. 1 minute Recommended 1.0-1.4 Recommended 1.0-1.4 Mass Typical Value 400 V 320 100 700 2100 -40 to +150 V A A A 2s °C -40 to +125 2500 1.5 1.5 °C V N·m 30 g SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] SanRex® Fast & Soft Recovery Diode < Electrical Characteristics > Symbol Item IRRM VFM t rr Rth(j-c) DBA200UA40 ° Conditions Tj= 25 C (unless otherwise noted) per diode Ratings Unit Min. Typ. Max. 100 mA Repetitive Peak Reverse Current Forward Voltage Drop VR = VRRM, Tj= 150°C IF = 100A, Inst. measurement 1.05 1.20 V Reverse Recovery Time Thermal Resistance IF = 100A, VR =200V, -di / dt = 200A/Fs Junction to case 100 130 0.45 ns °C/W * Dimensions in millimeters SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]