DIODE(THREE PHASES BRIDGE TYPE) DF20BA40/80 UL;E76102 (M) Power Diode Module DF20BA is designed for three phase full wave rectification, which has six diodes connected in a three phase bridge configuration. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink construction output DC current is 20Amp (Tc=123℃) Repetitive peak reverse voltage is up to 800V. 80 68 29 14 6.5 φ6.5 ● TjMax=150℃ ● Isolated Mounting Base reliability by unique glass passivation ● Easy Assemble by the #250 terminal Tab 16 12.512.5 13 13 ● High ∼ 28max + 8 6.35 2.5 5.5 ∼ 3 ∼ 4.4 16 (Applications) AC. DC Moter Drive/AVR/Switching ―for three phase rectification _ Unit:a ■Maximum Ratings Symbol (Tj=25℃ unless otherwise specified) Item Ratings DF20BA40 DF20BA80 Unit VRRM Repetitive Peak Reverse Voltage 400 800 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 V Symbol Item Conditions Output current (D.C.) Three phase. full wave. TC=123℃ IFSM Surge Forward Current 1 cycle, 50/60HZ, peak value, non-repetitive Tj Junction Temperature Tstg Storage Temperature ID VISO Isolation Breakdown Voltage(R.M.S.) Mounting Torque Main Terminal to case 1minute Mounting(M6) Recommended Value 2.5-3.9(25-40) Terminal Tub Terminal #250 Mass Typical Value Ratings Unit 20 A 320/350 A −40 to +150 ℃ −40 to +125 ℃ 2500 V 4.7(48) N・m (㎏f・B) ─ 90 g ■Electrical Characteristics Symbol Item Ratings Unit IRRM Repetitive Peak Reverse Current, max. Tj=150℃ at VRRM 1.5 mA VFM Forward Voltage Drop, max. IFM=20A, Tj=25℃ Inst. measurement 1.1 V Junction to case 0.6 ℃/W Rth(j-c) Thermal Impedance, max. SanRex Conditions ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DF20BA40/80 Forward Voltage Drop max. 50 Power Dissipation Pav(W) Forward Current I(A) F 50 20 Tj=25℃ 10 5 2 1 0. 5 1 1. 5 Output Current vs.Power Dissipation, max.(Three phase, full wave) 40 30 20 10 0 2 5 150 Output Current vs. Allowable case Temp 140 120 Three Phase 20 400 Per one element Tj=25℃ start 60Hz 50Hz 200 110 100 100 90 0 5 10 15 20 25 Output Current ID(A) Transient Thermal Impedance θj-c(℃/W) 15 Cycle Surge Forward Current Rating (Non-Repetitive) 300 130 0. 7 10 Output Current ID(A) Surge Forward Current I(A) F Allowable Case Temperature Tc(℃) Forward Voltage Drop V(V) F 0 100 2 5 101 2 5 102 Time(Cycles) Transient Thermal Impedance(max) Junction to Case 0. 6 0. 5 0. 4 0. 3 0. 2 0. 1 0 5 10ー1 SanRex 2 5 100 2 Time t(sec) 5 10 2 ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]