TetraFET D2218UK METAL GATE RF SILICON FET MECHANICAL DATA GOLD METALLISED MULTI-PURPOSE SILICON DMOS RF FET 20W – 12.5V – 1GHz SINGLE ENDED C 2 B A 3 D ( 2 p ls ) E FEATURES • SIMPLIFIED AMPLIFIER DESIGN 1 G H • SUITABLE FOR BROAD BAND APPLICATIONS F DP PIN 1 SOURCE PIN 3 GATE DIM A B C D E F G H PIN 2 DRAIN • LOW Crss • SIMPLE BIAS CIRCUITS mm 16.51 6.35 45° 1.52 6.35 0.13 3.56 0.64 Tol. 0.25 0.13 5° 0.13 0.13 0.03 0.51 0.13 Inches 0.650 0.250 45° 0.060 0.250 0.005 0.140 0.024 Tol. 0.010 0.005 5° 0.005 0.005 0.001 0.020 0.005 • LOW NOISE • HIGH GAIN – 10 dB MINIMUM APPLICATIONS • VHF/UHF COMMUNICATIONS from DC to 1 GHz ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) PD BVDSS BVGSS ID(sat) Tstg Tj Semelab plc. Power Dissipation Drain – Source Breakdown Voltage Gate – Source Breakdown Voltage Drain Current Storage Temperature Maximum Operating Junction Temperature Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Website: http://www.semelab.co.uk E-mail: [email protected] 70W 40V ±20V 16A –65 to 150°C 200°C 9/99 D2218UK ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions Min. BVDSS Drain–Source Typ. Max. Unit V VGS = 0 ID = 10mA VDS = 12.5V VGS = 0 8 mA VGS = 20V VDS = 0 8 mA VGS(th) Gate Threshold Voltage* ID = 10mA VDS = VGS 0.5 7 V gfs Forward Transconductance* VDS = 10V ID = 0.8A 1.44 S GPS Common Source Power Gain PO = 20W 10 dB Drain Efficiency VDS = 12.5V 40 % 20:1 — IDSS IGSS h Breakdown Voltage Zero Gate Voltage Drain Current Gate Leakage Current VSWR Load Mismatch Tolerance IDQ = 1.6A f = 1GHz Ciss Input Capacitance VDS = 0 Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 12.5V VGS = 0 VDS = 12.5V VGS = 0 * Pulse Test: 40 VGS = –5V f = 1MHz 96 pF f = 1MHz 80 pF f = 1MHz 8 pF Pulse Duration = 300 ms , Duty Cycle £ 2% HAZARDOUS MATERIAL WARNING The ceramic portion of the device between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area. THESE DEVICES MUST NEVER BE THROWN AWAY WITH GENERAL INDUSTRIAL OR DOMESTIC WASTE. THERMAL DATA RTHj–case Semelab plc. Thermal Resistance Junction – Case Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Website: http://www.semelab.co.uk E-mail: [email protected] Max. 2.5°C / W 9/99