SEME LAB MECHANICAL DATA Dimensions in mm (inches) NPN PNP MJ11028 MJ11030 MJ11032 MJ11029 MJ11031 MJ11033 COMPLEMENTARY DARLINGTON POWER TRANSISTOR 25.4 (1.0) 10.92 (0.430) 1.57 (0.062) 30 .15 (1.187 ) FEATURES 1 • HIGH DC CURRENT GAIN HFE = 1000 Min @ IC = 25A HFE = 400 Min 0@ IC = 50A 2 1 6 .89 (0.665) • CURVES TO 100A (Pulsed) • DIODE PROTECTION TO RATED IC • MONOLITHIC CONSTRUCTION WITH BUILT-IN BASE – EMITTER SHUNT RESISTOR 4.1 (0.161 +0.4 –0 +0.016 –0 4.0 ± 0.1 (0.157 ± 0.004) ) Tolerance ± 11.65 ± 0.35 (0.459 ± 0.014) 9.0 (0.354) 0.127 unless otherwise stated (0.005) APPLICATIONS TO–3 Pin 1 – Base Pin 2 – Emitter • JUNCTION TEMPERATURE TO +200°C Case – Collector For use as output devices in complementary general purpose amplifier applications. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) MJ11028 MJ11030 MJ11032 MJ11029 MJ11031 MJ11033 60V 90V 120V VCEO Collector – Emitter Voltage VCBO Collector – Base Voltage VEBO Emitter – Base Voltage 5V IC Continuous Collector Current 50A ICM Peak Collector Current 100A IB Base Current Ptot Total Dissipation at Tcase = 25°C Derate above 25°C TSTG , TJ Operating and Storage Junction Temperature Range Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk 60V 90V 120V 2A 300W 1.71W/°C –55 to +175°C Prelim. 2/96 SEME LAB Parameter NPN PNP MJ11028 MJ11030 MJ11032 MJ11029 MJ11031 MJ11033 Test Conditions Min. Typ. Max. Unit OFF CHARACTERISTICS V(BR)CEO* Collector – Emitter IC = 100mA Breakdown Voltage IB = 0 VCE = 60V RBE = 1kW ICER Collector – Emitter Leakage Current TC = 150°C VCE = 90V RBE = 1kW TC = 150°C VCE = 120V IEBO ICEO RBE = 1kW TC = 150°C Emitter Cut–Off Current VBE = 5V IC = 0 Collector – Emitter VCE = 50V Leakage Current IB = 0 MJ11028 , MJ11029 60 MJ11030 , MJ11031 90 MJ11032 , MJ11033 120 V 2 MJ11028 , MJ11029 10 2 MJ11030 , MJ11031 mA 10 2 MJ11032 , MJ11033 10 5 mA 2 mA ON CHARACTERISTICS hFE* VCE(sat)* VBE(sat)* VCE = 5V IC = 25A 1000 VCE = 5V IC = 50A 400 Collector – Emitter IC = 25A IB = 250mA 2.5 Saturation Voltage IC = 50A IB = 500mA 3.5 Base – Emitter IC = 25A IB = 200mA 3.0 Saturation Voltage IC = 50A IB = 300mA 4.5 DC Current Gain * Pulse Test: tp £ 300µs, d £ 2%. — V V Figure 1 – DC Safe Operating Area Figure 2 – DC Current Gain Semelab plc. 18000 Figure 3 – “ON” Voltage Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Prelim. 2/96