2N6295 MECHANICAL DATA Dimensions in mm(inches) 6.35 (0.250) 8.64 (0.340) 3.68 (0.145) rad. max. 11.94 (0.470) 12.70 (0.500) 0.71 (0.028) 0.86 (0.034) 3.61 (0.142) 3.86 (0.145) rad. 14.48 (0.570) 14.99 (0.590) 24.33 (0.958) 24.43 (0.962) DARLINGTON COMPLEMENTARY SILICON POWER TRANSISTOR FEATURES • LOWVCE(SAT) • HIGH CURRENT 1.27 (0.050) 1.91 (0.750) 4.83 (0.190) 5.33 (0.210) 9.14 (0.360) min. APPLICATIONS • GENERAL PURPOSE AMPLIFIER TO–66 PIN 1 — Base PIN 2 — Emitter • LOW FREQUENCY SWITCHING Case is Collector. • HAMMER DRIVER APPLICATIONS ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCEO VCB VEB IC IB PD Tj,Tstg, Collector – Emitter Voltage Collector – Base Voltage Emitter – Base Voltage Collector Current – Continuous Peak Base Current Total Power Dissipation at Tcase = 25°C Derate above 25°C Operating and Storage Junction Temperature Range 80V 80V 5V 4A 8A 80mA 50W 0.286 W/°C –65 to 200°C THERMAL CHARACTERISTICS RθJC Thermal Resistance, Junction to Case Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk 3.5 °C/W 11/99 2N6295 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter OFF CHARACTERISTICS Collector - Emitter Sustaining VCEO(sus) Voltage ICEO ICEX IEBO Test Conditions Min. Typ. Max. Unit IC = 50mA IB = 0 80 V Collector Cut-off Current IB = 0 VCE = 40V 0.5 mA Collector – Emitter Cut-off VCE = Rated VCB VEB(off) =1 5V 0.5 Tc = 150°C 5.0 IC = 0 VBE = 5V 2.0 IC = 2A VCE = 3V 750 IC = 4A VCE = 3V 100 Collector – Emitter IC = 2A IB = 8.0mA 2.0 Saturation Voltage IC = 4A IB = 40mA 3.0 IC = 4A IB = 40mA 4.0 V IC = 2A VCE = 3V 2.8 V IC = 1.5A VCE = 3V Current Emitter Cut-off Current mA mA ON CHARACTERISTICS hFE VCE(sat) VBE(sat) VBE(on) DC Current Gain Base – Emitter Saturation Voltage Base – Emitter On Voltage DYNAMIC CHARACTERISTICS Magnitude of Common Emitter |hfe| Small Signal Short Circuit Forward current Transfer Ratio Cob Output Capacitance hfe Small Signal Current Gain f =1.0 MHz VCB = 10V 4.0 IE = 0 VCE = 3.0V f =1.0 KHz 300 — V — 120 f =0.1 MHz IC = 1.5A 18000 pF — *Pulse test tp =300µs δ ≤ 2% Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk 11/99