TI TLV3702-Q1

SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
FEATURES
D Qualification in Accordance With AEC-Q100†
D Qualified for Automotive Applications
D Customer-Specific Configuration Control Can
D
D
D
D
D
D
D
D
† Contact factory for details. Q100 qualification data available on
request.
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
800
TA = 125°C
I CC − Supply Current/Ch − nA
D
Be Supported Along With Major-Change
Approval
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
Low Supply Current . . . 560 nA/Per Channel
Input Common-Mode Range Exceeds the
Rails . . . −0.1 V to VCC + 5 V
Supply Voltage Range . . . 2.7 V to 16 V
Reverse Battery Protection Up to 18 V
Push-Pull CMOS Output Stage
Specified Temperature Range
− −40°C to 125°C − Automotive Grade
Ultrasmall Packaging
− 5-Pin SOT-23 (TLV3701)
Universal Op-Amp EVM (Reference SLOU060
for more information)
700
TA = 70°C
600
TA = 25°C
500
TA = 0°C
400
TA = −40°C
300
200
VID = −1 V
100
2
0
4
6
8
10
12
14
16
VCC − Supply Voltage − V
high side voltage sense circuit
R1
1 MΩ
APPLICATIONS
D Low Power Automotive Electronics
D Security Detection Systems
R3
100 kΩ
VCC +
TLV370X
R2
1 MΩ
DESCRIPTION
Vref
0
The TLV370x is Texas Instruments’ first family of
nanopower comparators with only 560 nA per channel
supply current, which make this device ideal for low
power applications.
µP
D1
0
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
!"#$ % &'!!($ #% )'*+&#$ ,#$(!,'&$% &!" $ %)(&&#$% )(! $.( $(!"% (/#% %$!'"($%
%$#,#!, 0#!!#$1- !,'&$ )!&(%%2 ,(% $ (&(%%#!+1 &+',(
$(%$2 #++ )#!#"($(!%-
Copyright  2000 − 2003, Texas Instruments Incorporated
www.ti.com
1
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
DESCRIPTION (continued)
The TLV370x has a minimum operating supply voltage of 2.7 V over the extended automotive temperature range (TA
= −40°C to 125°C), while having an input common-mode range of −0.1 to VCC + 5 V. The low supply current makes
it an ideal choice for low power applications where quiescent current is the primary concern. Reverse battery
protection guards the amplifier from an over-current condition due to improper battery installation. For harsh
environments, the inputs can be taken 5 V above the positive supply rail without damage to the device.
Devices are available in SOIC with the singles in the small SOT-23 package. Other package options may be made
available upon request.
A SELECTION OF OUTPUT COMPARATORS†
DEVICE
VCC
(V)
VIO
(µV)
ICC/Ch
(µA)
IIB
(pA)
tPLH
(µs)
tPHL
(µs)
tf
(µs)
tr
(µs)
RAIL-TORAIL
OUTPUT
STAGE
TLV370x
2.5 − 16
250
0.56
80
56
83
22
8
I
PP
TLV340x
2.5 − 16
250
0.47
80
55
30
5
−
I
OD
TLC3702/4
3 − 16
1200
9
5
1.1
0.65
0.5
0.125
−
PP
TLC393/339
3 − 16
1400
11
5
1.1
0.55
0.22
−
−
OD
TLC372/4
3 − 16
1000
75
5
† All specifications are typical values measured at 5 V.
0.65
0.65
−
−
−
OD
TLV3701 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
- 40°C to 125°C
5000 µV
SMALL OUTLINE
(D)
SOT-23
(DBV)‡
SYMBOL
TLV3701QDRQ1†
TLV3701QDBVRQ1
† Product Preview
‡ This package is only available taped and reeled with standard quantities of 3000 pieces per reel.
TLV3702 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
−40°C to 125°C
5000 µV
SMALL OUTLINE
(D)
TLV3702QDRQ1
TLV3704 AVAILABLE OPTIONS
PACKAGED DEVICES
TA
−40°C to 125°C
† Product Preview
2
VIOmax
AT 25°C
5000 µV
www.ti.com
SMALL OUTLINE
(D)
TLV3704QDRQ1†
SYMBOL
3702Q1
VBCQ
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
TLV3701
D PACKAGE
(TOP VIEW)
TLV3701
DBV PACKAGE
(TOP VIEW)
OUT
GND
IN+
1
5
VCC
NC
IN −
IN +
GND
2
3
4
IN −
1
8
2
7
3
6
4
5
TLV3702
D PACKAGE
(TOP VIEW)
NC
VCC
OUT
NC
1OUT
1IN −
1IN +
GND
1
8
2
7
3
6
4
5
VCC
2OUT
2IN −
2IN+
TLV3704
D PACKAGE
(TOP VIEW)
1OUT
1IN −
1IN+
VCC
2IN+
2IN −
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN −
4IN+
GND
3IN+
3IN −
3OUT
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 V
Differential input voltage, VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 V
Input voltage range, VI (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to VCC + 5 V
Input current range, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Output current range, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C
Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. Input voltage range is limited to 20 V max or VCC + 5 V, whichever is smaller.
DISSIPATION RATING TABLE
PACKAGE
θJC
(°C/W)
θJA
(°C/W)
TA ≤ 25°C
POWER RATING
TA = 125°C
POWER RATING
D (8)
38.3
176
710 mW
142 mW
D (14)
26.9
122.6
1022 mW
204.4 mW
DBV (5)
55
324.1
385 mW
77.1 mW
www.ti.com
3
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
recommended operating conditions
Single supply
Supply voltage, VCC
Split supply
Common-mode input voltage range, VICR
Operating free-air temperature, TA
Q-suffix
MIN
MAX
2.7
16
±1.35
±8
−0.1
VCC+5
125
−40
UNIT
V
V
°C
electrical characteristics at specified operating free-air temperature, VCC = 2.7 V, 5 V, 15 V (unless
otherwise noted)
dc performance
PARAMETER
TEST CONDITIONS
TA†
MIN
25°C
VIO
Input offset voltage
αVIO
Offset voltage drift
CMRR
AVD
Common-mode rejection ratio
RS = 50 Ω
VIC = VCC/2,
RS = 50 Ω
VIC = 0 to 5 V,
RS = 50 Ω
VIC = 0 to 15 V,
RS = 50 Ω
Large-signal differential voltage
amplification
MAX
250
5000
Full range
7000
25°C
VIC = 0 to 2.7 V,
TYP
25°C
55
50
25°C
60
Full range
55
25°C
65
Full range
60
25°C
V
µV
µV/°C
3
Full range
UNIT
72
76
dB
88
1000
V/mV
† Full range is − 40°C to 125°C for Q suffix.
input/output characteristics
PARAMETER
TEST CONDITIONS
TA†
MIN
25°C
IIO
Input offset current
IIB
Input bias current
ri(d)
Differential input resistance
VIC = VCC/2,
IOH = 2 µA, VID = 1 V
High-level output voltage
VIC = VCC/2,
VIC = VCC/2,
VOL
Low-level output voltage
100
Full range
1000
25°C
80
VIC = VCC/2,
300
25°C
VCC−
0.08
25°C
VCC−
320
Full range
VCC−
450
IOH = 2 µA, VID = −1 V
IOH = 50 µA, VID = −1 V
www.ti.com
pA
pA
MΩ
mV
25°C
8
25°C
80
Full range
UNIT
250
2000
25°C
A, VID = 1 V
IOH = −50 µA,
† Full range is − 40°C to 125°C for Q suffix.
4
MAX
20
Full range
VIC = VCC/2,
VOH
RS = 50 Ω
TYP
200
300
mV
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
electrical characteristics at specified operating free-air temperature, VCC = 2.7 V, 5 V, 15 V (unless
otherwise noted) (continued)
power supply
PARAMETER
TA†
TEST CONDITIONS
MIN
25°C
ICC
PSRR
Supply current (per channel)
Power supply rejection ratio
Output state high
TYP
560
Full range
VCC = 2.7 V to 5 V
VIC = VCC/2 V,
No load
VCC = 5 V to 15 V
MAX
800
1200
25°C
75
Full range
70
25°C
85
Full range
80
UNIT
nA
100
dB
105
† Full range is − 40°C to 125°C for Q suffix.
switching characteristics at recommended operating conditions, VCC = 2.7 V, 5 V, 15 V, TA = 25°C
(unless otherwise noted)
PARAMETER
t(PLH)
TEST CONDITIONS
Propagation response time, low-to-high-level
output (see Note 3)
t(PHL)
Propagation response time, high-to-low-level
output (see Note 3)
f = 1 kHz,
VSTEP = 100 mV,
CL = 10 pF,
VCC = 2.7 V,
VIC = VCC/2
tr
Rise time
CL = 10 pF,
MIN
TYP
Overdrive = 2 mV
240
Overdrive = 10 mV
64
Overdrive = 50 mV
36
Overdrive = 2 mV
167
Overdrive = 10 mV
67
Overdrive = 50 mV
37
VCC = 2.7 V
7
MAX
UNIT
150†
µss
150†
µs
tf
Fall time
CL = 10 pF, VCC = 2.7 V
9
µs
NOTE 3: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. Propagation
responses are longer at higher supply voltages, refer to Figures 11−16 for further details.
† This limit applies to the TLV3701-Q1 only.
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
Input bias/offset current
vs Free-air temperature
VOL
VOH
Low-level output voltage
vs Low-level output current
2, 4, 6
High-level output voltage
vs High-level output current
3, 5, 7
ICC
Supply current
vs Supply voltage
Output fall time/rise time
1
8
vs Free-air temperature
9
vs Supply voltage
10
Low-to-high level output response for various input overdrives
11, 13, 15
High-to-low level output response for various input overdrives
12, 14, 16
www.ti.com
5
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
TYPICAL CHARACTERISTICS
INPUT BIAS/OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
2.7
VOL − Low-Level Output Voltage − V
VCC = 15 V
1000
800
IIB
600
400
200
IIO
0
VCC = 2.7 V
VID = −1 V
2.4
TA = 125°C
2.1
TA = 70°C
1.8
TA = 25°C
1.5
1.2
TA = 0°C
0.9
0.6
TA = −40°C
0.3
0.0
−200
−40 −25 −10 5 20 35 50 65 80 95 110 125
TA − Free-Air Temperature − °C
0
0.1
0.2
Figure 1
TA = −40°C
TA = 0°C
1.8
1.5
TA = 25°C
1.2
0.9
TA = 70°C
0.6
0.3
TA = 125°C
0.0
VCC = 5 V
VID = −1 V
4.5
4
TA = 125°C
3.5
TA = 70°C
3
2.5
2
TA = 25°C
1.5
TA = 0°C
1
TA = −40°C
0.5
0
IOH − High-Level Output Current − mA
0.4
0.8
TA = 70°C
TA = 25°C
6
4.5
TA = 0°C
3
TA = −40°C
1.5
0
1
2
3
4
5
6
7
8
IOL − Low-Level Output Current − mA
Figure 6
6
VOH − High-Level Output Voltage − V
VOL − Low-Level Output Voltage − V
TA = 125°C
7.5
0
1.2
1.6
2.0
2.4
TA = −40°C
TA = 0°C
3
TA = 25°C
2.5
2
TA = 70°C
1.5
1
TA = 125°C
0.5
0
2.8
0.2 0.4
Figure 5
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
800
9
TA = 125°C
TA = 0°C
13.5
12
TA = −40°C
10.5
9
TA = 25°C
7.5
6
TA = 70°C
4.5
3
TA = 125°C
VCC = 15 V
VID = −1 V
1.5
0
0.6 0.8 1.0 1.2 1.4 1.6 1.8
IOH − High-Level Output Current − mA
15
VCC = 15 V
VID = −1 V
9
4
3.5
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
15
12
VCC = 5 V
VID = −1 V
Figure 4
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
10.5
0.8
4.5
IOL − Low-Level Output Current − mA
Figure 3
13.5
0.7
0
0
0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45
I CC − Supply Current/Ch − nA
0
0.6
5
5
VOL − Low-Level Output Voltage − V
VOH − High-Level Output Voltage − V
2.1
0.5
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
VCC = 2.7 V
VID = −1 V
2.4
0.4
Figure 2
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
2.7
0.3
IOL − Low-Level Output Current − mA
VOH − High-Level Output Voltage − V
I IB / I IO − Input Bias/Offset Current − pA
1200
0
1
2
700
TA = 70°C
600
TA = 25°C
500
TA = 0°C
400
TA = −40°C
300
200
VID = −1 V
100
3
4
5
6
7
8
IOH − High-Level Output Current − mA
Figure 7
www.ti.com
9
0
2
4
6
8
10
12
VCC − Supply Voltage − V
Figure 8
14
16
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
OUTPUT RISE/FALL TIME
vs
SUPPLY VOLTAGE
120
VCC = 2.7 V, 5 V, 15 V
VID = −1 V
600
t r(f) − Output Rise/Fall Time − µ s
I CC − Supply Current /Ch − nA
700
500
400
300
200
100
VID= 1 V to −1 V
Input Rise/Fall Time = 4 µs
CL = 10 pF
TA = 25°C
100
80
60
Fall Time
40
20
Rise Time
0
20 35 50 65 80 95 110 125
0
TA − Free-Air Temperature − °C
Figure 9
V O − Output Voltage − V
VO − Output Voltage − V
15
HIGH-TO-LOW LEVEL OUTPUT RESPONSE
FOR VARIOUS INPUT OVERDRIVES
50 mV
2 mV
10 mV
0
VCC = 2.7 V
CL = 10 pF
TA = 25°C
3
2.7
2.4
2.1
1.8
1.5
1.2
0.9
0.6
0.3
0
−0.3
−0.05
−0.10
−0.15
25 50 75 100125150175200225250275300
50 mV
2 mV
10 mV
0.15
VID − Differential
Input Voltage − V
0.05
0
5
7.5
10
12.5
VCC − Supply Voltage − V
Figure 10
LOW-TO-HIGH OUTPUT RESPONSE
FOR VARIOUS INPUT OVERDRIVES
3
2.7
2.4
2.1
1.8
1.5
1.2
0.9
0.6
0.3
0
2.5
VCC = 2.7 V
CL = 10 pF
TA = 25°C
0.10
0.05
0
−0.05
0 25 50 75 100125150175200225250275300
VID − Differential
Input Voltage − V
0
−40 −25 −10 5
Figure 12
LOW-TO-HIGH LEVEL OUTPUT RESPONSE
FOR VARIOUS INPUT OVERDRIVES
HIGH-TO-LOW LEVEL OUTPUT RESPONSE
FOR VARIOUS INPUT OVERDRIVES
6
5
4
3
2
50 mV
10 mV
2 mV
1
0
VCC = 5 V
CL = 10 pF
TA = 25°C
−0.05
−0.10
−0.15
0 25 50 75 100125150175200225250275300
Input Voltage − V
0.05
VID − Differential
0
6
5
4
50 mV
3
2
2 mV
10 mV
1
0
VCC = 5 V
CL = 10 pF
TA = 25°C
0.10
0.05
0
−0.05
0 25 50 75 100125150175200225250275300
t − Time − µs
VID − Differential
Input Voltage − V
V O − Output Voltage − V
t − Time − µs
Figure 11
V O − Output Voltage − V
t − Time − µs
t − Time − µs
Figure 13
Figure 14
www.ti.com
7
SGLS154C − NOVEMBER 2000 − REVISED NOVEMBER 2003
TYPICAL CHARACTERISTICS
2 mV
10 mV
VCC = 15 V
CL = 10 pF
TA = 25°C
0.04
0
−0.04
−0.08
−0.12
0 25 50 75 100125150175200225250275300
2 mV
0.12
0.08
0.04
0
−0.04
100 150 200 250 300 350 400
VCC = 15 V
CL = 10 pF
TA = 25°C
0
t − Time − µs
50
t − Time − µs
Figure 15
8
10 mV
Input Voltage − V
4
2
0
50 mV
Figure 16
www.ti.com
Input Voltage − V
50 mV
16
14
12
10
8
6
4
2
0
V ID − Differential
V O − Output Voltage − V
16
14
12
10
8
6
HIGH-TO-LOW LEVEL OUTPUT RESPONSE
FOR VARIOUS INPUT OVERDRIVES
V ID − Differential
V O − Output Voltage − V
LOW-TO-HIGH LEVEL OUTPUT RESPONSE
FOR VARIOUS INPUT OVERDRIVES
PACKAGE OPTION ADDENDUM
www.ti.com
25-Feb-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TLV3701QDBVRQ1
ACTIVE
SOT-23
DBV
5
3000
None
Call TI
TLV3702QDRQ1
ACTIVE
SOIC
D
8
2500
Pb-Free
(RoHS)
CU NIPDAU
Lead/Ball Finish
MSL Peak Temp (3)
Level-1-220C-UNLIM
Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated