SURFACE MOUNT SILICON RECTIFIER SMA4001-SMA4007 VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere MECHANICAL DATA FEATURES * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.064 gram * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMA ( DO-214AC ) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75℃ Peak Forward Surge Current: 8.3 ms single half sine-wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC @TA = 25℃ Maximum DC Reverse Current at Rated DC Blocking Voltage @TA = 125℃ Maximum Reverse Recovery Time (Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance ( Note 3 ) Operating and Storage Temperature Range Notes: SYMBOL VRRM VRMS VDC IO SMA4001 SMA4002 SMA4003 SMA4004 SMA4005 SMA4006 SMA4007 UNITS GS1A/M1 GS1B/M2 GS1D/M3 GS1G/M4 GS1J/M5 GS1K/M6 GS1M/M7 50 35 50 100 70 100 200 140 200 IFSM 30 VF 1.1 5.0 50 2.5 30 15 -65 to +175 IR trr CJ RθJL TJ,TSTG 1.Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2 2 2. Thermal Resistance from Junction to Ambient, .24” (6.0mm ) copper pads to each Terminal. 3. Measured at 1.0MHz and applied reverse voltage of4.0VDC Wing Shing Computer Components Co., (H.K.)Ltd. Homepage: http://www.wingshing.com 400 280 400 1.0 Tel:(852)2341 9276 Fax:(852)2797 8153 E-mail: [email protected] 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps Volts uAmps uSec pF ℃/W ℃ SMA4001-SMA4007 RATING AND CHARACTERISTIC CURVES Wing Shing Computer Components Co., (H.K.)Ltd. Homepage: http://www.wingshing.com Tel:(852)2341 9276 Fax:(852)2797 8153 E-mail: [email protected]