KSD5018 KSD5018 Built-in Resistor at B-E for Motor Drive • High Voltage Power Darlington TR TO-220 1 1.Base 2.Collector 3.Emitter NPN Silicon Darlington Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Collector- Base Voltage 600 V VCEO Collector- Emitter Voltage 275 V VEBO Emitter Base Voltage 10 V IC Collector Current (DC) 4 A ICP *Collector Current (Pulse) 6 A Parameter Value Units IB Base Current 0.5 A PC Collector Dissipation (TC=25°C) 40 W TJ Junction Temperature 150 °C TSTG Storage Temperature - 55 ~ 150 °C Electrical Characteristics TC=25°C unless otherwise noted Symbol VCEO(sus) Parameter Collector-Emitter Sustaining Voltage Test Condition IC = 1.5A, IB = 0.05A, L = 25mH Min. 275 600 BVCER Collector-Emitter Breakdown Voltage IC = 1mA, RBE = 330Ω ICES Collector Cut-off Current VCE = 500V Max. Units V 1 mA V IEBO Emitter Cut-off Current V EB= 10V, IC = 0 1 mA VCE(sat) Collector-Emitter Saturation Voltage IC = 2A, IB = 5mA IC = 3A, IB = 20mA 1.5 1.5 V V VBE(sat) Base-Emitter Saturation Voltage IC = 2A, IB = 5mA 2 V ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSD5018 VBE(sat), VCE(sat)[V], SATURATION VOLTAGE Typical Characteristics 10000 hFE, DC CURRENT GAIN VCE = 5V 1000 100 10 0.01 0.1 1 10 100 IC = 400 IB 10 V BE(sat) 1 VCE(sat) 0.1 0.1 IC[A], COLLECTOR CURRENT Figure 1. Static Characteristic 10 100 Figure 2. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 10 IC[A], COLLECTOR CURRENT 1000 Cob[pF], CAPACITANCE 1 IC[A], COLLECTOR CURRENT 100 1 0.1 10 1 10 100 VCB[V], COLLECTOR-BASE VOLTAGE 1 10 100 1000 VCB [V], COLLECTOR BASE VOLTAGE Figure 3. Collector Output Capacitance Figure 4. Safe Operating Area 50 PC[W], POWER DISSIPATION 45 40 35 30 25 20 15 10 5 0 0 25 50 75 100 125 150 175 o TC[ C], CASE TEMPERATURE Figure 5. Power Derating ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSD5018 Package Demensions TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 10.08 ±0.30 (1.00) 13.08 ±0.20 ) (45° 1.27 ±0.10 +0.10 0.50 –0.05 2.40 ±0.20 2.54TYP [2.54 ±0.20] 10.00 ±0.20 Dimensions in Millimeters ©2000 Fairchild Semiconductor International Rev. A, February 2000 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOS™ FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench® QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2000 Fairchild Semiconductor International Rev. E