RoHS SMD COMMON MODE POWER INDUCTORS PCSDW127 Dimensions: Inches (mm) Features Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 0.25V DCR (Ω) PCSDW127-4R7M-RC PCSDW127-100M-RC PCSDW127-150M-RC PCSDW127-470M-RC PCSDW127-600M-RC PCSDW127-900M-RC PCSDW127-101M-RC PCSDW127-681M-RC 4.7 10 15 47 60 90 100 680 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 0.0140 0.0172 0.0310 0.0863 0.1120 0.1800 0.2080 2.7000 Rated Current (A) 16.400 11.200 9.660 4.000 4.100 3.000 3.640 1.390 • Small SMD common mode choke • Suitable for reflow soldering • Low DCR • Suitable for pick and place Electrical Inductance Range: 4.7µh to 680µh Tolerance: 20% over entire inductance range Available in tighter tolerances Operating Temp: -55ºC ~ +125ºC Rated Current: Current at which the inductance drops 35% of initial value or ∆ T=40ºC whichever is lower Land Pattern Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): HP 4338B Millohm meter or equivalent (Rated Current): 3260N WK LCR Meter & DC Bias 3265B WK Schematic Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 05/10/10 15 www.alliedcomponents.com