AZDISPLAYS PD057VT2

P-511-537(V:2)
P D057V T 2
V ers ion : 2.0
T E C HNIC AL
MODE L
S P E C IF IC AT ION
NO. : P D057V T 2
T he content of this information is s ubject to be changed without notice.
P leas e contact P V I or its agent for further information.
C us tomer•s C onfirmation
C us tomer
Date
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
By
P V I•s C onfirmation
C onfirmed B y
P repared B y
T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be
dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o.,
Ltd.
P age:1
P-511-537(V:2)
PD057VT2
Revision History
Rev. Issued Date
1.0 Jul.10, 2007
2.0 May 19, 2009
Eng.
‫࣑ܦ‬ᙤ
‫࣑ܦ‬ᙤ
Revised
Contents
New
Delete FPC connector pin pitch
BeforeǺ
Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins,
pitch=0.5mm
AfterǺ
Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:2
P-511-537(V:2)
PD057VT2
TECHNICAL
SPECIFICATION
CONTENTS
NO.
ITEM
PAGE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Cover
Revision History
Contents
Application
Features
Mechanical Specifications
Mechanical Drawing of TFT-LCD module
Input / Output Terminals
Absolute Maximum Ratings
Electrical Characteristics
Pixel Arrangement
Display Color and Gray Scale Reference
Interface Timing
Power On Sequence
Optical Characteristics
1
2
3
4
4
4
5
6
7
7
8
9
10
12
12
16
18
19
Handling Cautions
Reliability Test
Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:3
P-511-537(V:2)
PD057VT2
1. Application
This data sheet applies to a color TFT LCD module, PD057VT2.
PD057VT2 module applies to OA product, car TV (must use Analog to Digital driving board),
which requires high quality flat panel display. If you must use in severe reliability
environment, please don’t extend over PVI’s reliability test conditions.
2. Features
. VGA (640*480 pixels) resolution
. Amorphous silicon TFT LCD panel with back-light unit
. Pixel in stripe configuration
. Thin and light weight
. Display ColorsΚ262,144 colors
. TTL interface
3. Mechanical Specifications
Parameter
Screen Size
Display Format
Display Colors
Active Area
Pixel Pitch
Pixel Configuration
Outline Dimension
Weight
Back-light
Surface treatment
Display mode
Gray scale inversion direction
Specifications
5.7 (diagonal)
640ͪ(R,G,B)ͪ480
262,144
115.20 (H)ͪ86.4 (V)
0.18(H)ͪ0.18(V)
Stripe
144.0 (W)Ø104.6(H)Ø13.0 (D) (typ.)
210²10
CCFL , 1 tube
Anti-glare + EWV film
Normally white
6 o`clock
[ ref. to Note 12-1]
Unit
inch
dot
mm
mm
mm
g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:4
P-511-537(V:2)
PD057VT2
4.Mechanical Drawing of TFT-LCD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:5
P-511-537(V:2)
PD057VT2
5.Input / Output Terminals
5-1) TFT-LCD Panel Driving
Connector type: ELCO 08-6210-033-340-800A+, PIN No 33 pins
Pin No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Symbol I/O
GND
I
CK
I
Hsync
I
Vsync
GND
R0
I
R1
I
R2
I
R3
I
R4
I
R5
GND
I
G0
I
G1
I
G2
I
G3
I
G4
I
G5
GND
I
B0
I
B1
I
B2
I
B3
I
B4
I
B5
GND
I
ENAB
VCC
VCC
30
R/L
I
31
U/D
I
32
33
V/Q
GND
I
-
Description
GND
Clock signal for sampling each data signal
Horizontal synchronous signal (neqative)
Vertical synchronous signal (neqative)
GND
RED data signal (LSB)
RED data signal
RED data signal
RED data signal
RED data signal
RED data signal (MSB)
GND
GREEN data signal (LSB)
GREEN data signal
GREEN data signal
GREEN data signal
GREEN data signal
GREEN data signal (MSB)
GND
Blue data signal (LSB)
Blue data signal
Blue data signal
Blue data signal
Blue data signal
Blue data signal (MSB)
GND
Signal to settle the horizontal display position(positive)
+3.3V power supply
+3.3V power supply
Horizontal display mode select signal
LΚNormal ,HΚLeft /Right reverse mode
Vertical display mode select signal
HΚNormal ,LΚUp/Down reverse mode
HΚNormal
GND
Remark
Note5-1
Note5-2
Note5-1ΚThe horizontal display start timing is settled in accordance with rising of ENAB signal.
In case ENAB is fixed ”Low”,the horizontal start timing is determined as described in
10-2. Don`t keep ENAB”High” during operation.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:6
P-511-537(V:2)
PD057VT2
Note 5-2ΚThe definitions of U/D & R/L
R/L(PIN 30)= Low, U/D(PIN 31)= High
R/L(PIN 30)= High , U/D(PIN 31)= Low
5-2) Backlight driving
Connector type: JST BHR-03VS-1, PIN No 3 pins
Pin No
Symbol
Description
Remark
1
VHigh
Power supply for lamp (High voltage side)
Pink
2
NC
No connect
-
3
VLow
Power supply for lamp (Low voltage side)
White
Note 5-3 : Low voltage side of backlight inverter connects with ground of inverter circuits.
6.Absolute Maximum Ratings:
Parameters
Input Voltage
GND=0V, Ta=25к
Symbol
VI
Condition
MAX.
Unit
V
Ta=25к
-0.3~+4
Ta=25к
+3.3V supply voltage
VCC
0~+3.6
V
Note6-1:CK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D,V/Q
Remark
Note6-1
7.Electrical Characteristics
7-1) Recommended Operating Conditions:
Item
+3.3V Supply Voltage
Permissive input ripple voltage
Input voltage(Low)
Input voltage(High)
GND=0V, Ta=25к
Symbol
VCC
Min.
Typ.
Max.
+3.0
+3.3
+3.6
VRF
VIL
VIH
0
0.7 VCC
-
100
0.3 VCC
VCC
Unit
Remark
V
mVp-p VCC=3.3V
V
V
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:7
P-511-537(V:2)
PD057VT2
7-2) Recommended Driving Condition for Back Light
Ta=25к
Parameter
Symbol
Min.
Typ.
Max.
Unit
Remark
Lamp Voltage
VL
639
710
781
V
IL=5mA
Lamp Current
IL
4
5
8
mA
Note 7-1
Lamp Frequency
FL
KHz
Note 7-2
35
Vs
Vrms
Note 7-3
Starting Voltage (25к)
1240
(Reference Value)
Vs
Vrms
Note 7-3
Starting Voltage (0к)
1380
(Reference Value)
Note 7-1ΚIn order to have proper operation of the B/L, no matter what kind of inverters, the
output lamp current must be between Min. and Max. values to avoid the abnormal
display image caused by B/L.
Note 7-2ΚThe driving frequency of the lamp may interfere with the horizontal synch signal,
leaving interference stripes on the display. So please evaluate LCD panels
beforehand.
To avoid interference stripes, we recommend to separate as far as possible the
lamp frequency from the horizontal synchronous signal and its high harmonic
frequency.
The inverter which PVI uses is TAD347-1.
Note 7-3ΚThe “Starting Voltage” means the minimum voltage of inverter to turn on the lamp.
And it should be applied to the lamp for more than 1 second to start up. Otherwise
the lamp may not be turned on.
7-3) Power Consumption
Parameters
Symbol
Typ.
Max.
Unit
Remark
+3.3V Current Dissipation
ICC
67
100
mA
LCD Panel Power Consumption
0.22
0.33
W
Note 7-4
Backlight Power Consumption
-
3.55
3.91
W
Note 7-5
Note 7-4: The power consumption for back light is not included.
Note 7-5: Back light lamp power consumption is calculated by ILͪVL.
8. Pixel Arrangement
The LCD module pixel arrangement is stripe configuration.
640
478
479
480
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:8
P-511-537(V:2)
PD057VT2
9. Display Color and Gray Scale Reference
Color
Input Color Data
Green
Red
Blue
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic
Colors
Red
Green
Blue
Black
Red (63)
Green (63)
Blue (63)
Cyan
Magenta
Yellow
White
Red (00)
Red (01)
Red (02)
Darker
ʆ
Brighter
Red (61)
Red (62)
Red (63)
Green (00)
Green (01)
Green (02)
Darker
ʆ
Brighter
Green (61)
Green (62)
Green (63)
Blue (00)
Blue (01)
Blue (02)
Darker
ʆ
Brighter
Blue (61)
Blue (62)
Blue (63)
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
1
0
1
0
0
0
1
1
1
0
1
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ ʆ
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:9
P-511-537(V:2)
PD057VT2
10. Interface Timing
10-1) Timing Parameters
Note 10-1 : In case of low-frequency, the deterioration of display quality, flicker etc., may occur.
10-2) Display Position in horizontal direction
Display position in horizontal direction is designated by rising timing of ENAB signal.
When ENAB is fixed to “Low”, the horizontal display will starts from 144th clock after HS falling.
10-3) Display Position in vertical direction
th
Display start position in vertical direction is fixed to the 35 line.
The ENAB signal does not relate to Vertical display position.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:10
P-511-537(V:2)
PD057VT2
10-4) Timing Diagram
THWh
Tcph
Tcwl
Tcwh
*Only when enable terminal is fixed “ Low”
Tdhd
Tdsu
Horizontal invalid data period
THs
D638
D639 D640
Horizontal invalid data period
Tesu
Twv
TSTV
Vertical invalid data period
DH1
DH2
DH3
DH479 DH480
Vertical invalid data period
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:11
P-511-537(V:2)
PD057VT2
11. Power On Sequence
VDD
3.0V
3.0V
Signal*3
0.3V
t2
t1
t3
Back Light ON
OFF
OFF
10ms
10ms
1. 0Іt1Љ20ms
2. 0Іt2Љ50ms
3. 0Іt3Љ1s
12. Optical Characteristics
12-1) Specification:
MIN.
TYP.
MAX.
70
75
-
Ta=25к
Unit Remarks
deg
65
70
-
deg
45
50
-
deg
400
600
-
-
-
15
30
ms
-
25
ms
450
500
50
-
80
85
-
%
Note 12-5
-
-
3.5
%
Note 12-6
x
0.28
0.31
0.34
-
y
0.33 0.36 0.39
50000
-
-
Parameter
Symbol
Ӱ
Horizontal
Viewing
Angle
Vertical
Contrast Ratio
Response time
Ӱ(to 6
o’clock)
Ӱ(to 12
o’clock)
CR
Rise
Tr
Fall
Tf
Brightness
-
Luminance Uniformity
U%
Cross Talk
-
White Chromaticity
Lamp Life Time
-
Condition
CRЊ10
At optimized
viewing angle
Ӱ=0̓
Ӱ=0°/ӽ=0
Ӱ=0̓
Note 12-1
Note 12-2
Note 12-3
cd/ф Note 12-4
hrs
IL= 5mA
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:12
P-511-537(V:2)
PD057VT2
Note 12-1: The definitions of viewing angles are as follow
θ
12 oϗ
clock
Lamp connector
3 oϗ
clock
9 oϗ
clock
φ
6 oϗ
clock
Note 12-2: The definition of contrast ratio CR =
Luminance at White Pattern
Luminance at Black Pattern
Note 12-3: Definition of Response Time Tr and Tf:
W hite
Black
W hite
100%
90%
Brightness
10%
0%
Tr
Tf
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:13
P-511-537(V:2)
PD057VT2
Note 12-4: All optical measurements shall be performed after backlight being turned-on for 30
mins. The optical characteristics shall be measured in dark room (ambient illumination
on panel surface less than 1 Lux). The measuring configuration shows as following
figure.
Photometer (TOPCON
BM-5A or BM-7 fast)
500 mm +/- 50 mm
Field = 1°
TFT-LCD module
Optical characteristics measuring configuration
Note 12-5: The uniformity of LCD is defined as
U=
The Minimum Brightness of the 9 testing Points
The Maximum Brightness of the 9 testing Points
Luminance meter: BM-5A or BM-7 fast (TOPCON)
Measurement distance: 500 mm +/- 50 mm
Ambient illumination: < 1 Lux
Measuring direction: Perpendicular to the surface of module
The test pattern is white.
1/6
2/6
2/6
1/6
1/6
2/6
2/6
1/6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:14
P-511-537(V:2)
PD057VT2
Note 12-6: Cross Talk (CTK) =
⏐YA-YB⏐ ͪ100%
YA
YA: Brightness of Pattern A
YB: Brightness of Pattern B
Luminance meter : BM 5A or BM-7 fast (TOPCON)
Measurement distance : 500 mm +/- 50 mm
Ambient illumination : < 1 Lux
Measuring direction : Perpendicular to the surface of module
Pattern A
Pattern B
(Gray Level 31)
(Gray Level 31, central
black box exclusive)
YA
YB
1/3
1/3
1/3
1/3
1/3
1/3
Black
: Measuring Point (A and B are at the same point.)
(Gray Level 0)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:15
P-511-537(V:2)
PD057VT2
XZUGoˆ•‹“•ŽGjˆœ›–•š
XZUGoˆ•‹“•ŽGjˆœ›–•š
XPGt–œ•›•ŽG–G”–‹œ“ŒGG
XZTXPGt–œ•›•ŽG–G”–‹œ“Œ
ˆPGw“ŒˆšŒG—–žŒ™G–G›ŒG”–‹œ“ŒGžŒ•G –œGŠ–••ŒŠ›G›ŒG•—œ›V–œ›—œ›GŠ–••ŒŠ›–™UG
‰PG w“ŒˆšŒG Š–••ŒŠ›G ›ŒG Ž™–œ•‹G —ˆ››Œ™•G –G ›ŒG •Œ™›Œ™G Š™Šœ›G šœ™Œ“ UG pG ›ŒG
Š–••ŒŠ›–•GšG•–›G—Œ™ŒŠ›SGš–”ŒG–““–ž•ŽG—™–‰“Œ”šG”ˆ Gˆ——Œ•G—–šš‰“ UG
XUG{ŒG•–šŒG™–”G›ŒG‰ˆŠ’“Ž›Gœ•›Gž““G•Š™ŒˆšŒUG
YUG{ŒG–œ›—œ›G™–”G•Œ™›Œ™GŠ™Šœ›Gž““G‰ŒGœ•š›ˆ‰“ŒUG
ZUGp•Gš–”ŒGŠˆšŒšGˆG—ˆ™›G–G”–‹œ“ŒGž““GŒˆ›UG
ŠPG w–“ˆ™¡Œ™G žŠG šG ”ˆ‹ŒG –G š–›G ”ˆ›Œ™ˆ“G ˆ•‹G šœšŠŒ—›‰“ŒG ›–G “ˆžG ”œš›G ‰ŒG
ˆ•‹“Œ‹GŠˆ™Œœ““ UG
‹PG w™–›ŒŠ›ŒG “”G Osˆ”•ˆ›–™PG šG ˆ——“Œ‹G –•G šœ™ˆŠŒG ›–G —™–›ŒŠ›G ›G ˆŽˆ•š›G
šŠ™ˆ›ŠŒšGˆ•‹G‹™›šUG
ŒPG w“ŒˆšŒG –““–ž•ŽG ›ŒG ›Œˆ™G –G ‹™ŒŠ›–•G ˆšG Žœ™ŒG XZTXG ›–G ™Œ”–ŒG ›ŒG
—™–›ŒŠ›ŒG “”G ˆšG š“–ž“ G ˆšG —–šš‰“ŒSG š–G ›ˆ›G Œ“ŒŠ›™–š›ˆ›ŠG Šˆ™ŽŒG Šˆ•G ‰ŒG
”•”¡Œ‹UG
YPGw™ŒŠˆœ›–•šG•G”–œ•›•ŽG
XZTYPGw™ŒŠˆœ›–•šG•G”–œ•›•Ž
ˆPG ~Œ•G ”Œ›ˆ“G —ˆ™›G –G ›ŒG {m{TsjkG ”–‹œ“ŒG OšŒ“‹•ŽG “‹G ˆ•‹G ™Œˆ™G ŠˆšŒPG šG
š–“Œ‹SGž—ŒG›Gž›Gš–›G‹™ GŠ“–›UG
‰PG~—ŒG–Gžˆ›Œ™G‹™–—šG–™G•ŽŒ™GŽ™ŒˆšŒG””Œ‹ˆ›Œ“ UGs–•ŽGŠ–•›ˆŠ›Gž›Gžˆ›Œ™G
”ˆ GŠˆœšŒG‹šŠ–“–™ˆ›–•G–™Gš—–›šUG
ŠPG {m{TsjkG ”–‹œ“ŒG œšŒšG Ž“ˆššG žŠG ‰™Œˆ’šG –™G Š™ˆŠ’šG Œˆš“ G G ‹™–——Œ‹G –™G
‰œ”—Œ‹G–•Gˆ™‹Gšœ™ˆŠŒUGw“ŒˆšŒGˆ•‹“ŒGž›GŠˆ™ŒUG
‹PGz•ŠŒGjtvzGszpGšGœšŒ‹G•G›ŒG”–‹œ“ŒUGz–G›ˆ’ŒGŠˆ™ŒG–Gš›ˆ›ŠGŒ“ŒŠ›™Š› Gˆ•‹G
Œˆ™›G –œ™šŒ“GžŒ•Gˆ•‹“•ŽUG
XZTZPGh‹‘œš›•ŽG”–‹œ“Œ
ZPGh‹‘œš›•ŽG”–‹œ“ŒG
ˆPGh‹‘œš›•ŽG–“œ”ŒšG–•G›ŒG™Œˆ™GˆŠŒG–G›ŒG”–‹œ“ŒGˆŒG‰ŒŒ•GšŒ›G–—›”ˆ““ G
‰Œ–™ŒGš—”Œ•›UG
‰PG {Œ™Œ–™ŒSG ‹–G •–›G Šˆ•ŽŒG ˆ• G ˆ‹‘œš›Œ‹G ˆ“œŒšUG pG ˆ‹‘œš›Œ‹G ˆ“œŒšG ˆ™ŒG
Šˆ•ŽŒ‹SG›ŒGš—ŒŠŠˆ›–•šG‹ŒšŠ™‰Œ‹G”ˆ G•–›G‰ŒGšˆ›šŒ‹UG
XZT[PGv›Œ™šG
[PGv›Œ™š
ˆPGk–G•–›GŒŸ—–šŒG›ŒG”–‹œ“ŒG›–G‹™ŒŠ›Gšœ•“Ž›G–™G•›Œ•šŒGœ“›™ˆ–“Œ›G™ˆ šG–™G
”ˆ• G–œ™šUG
‰PGz›–™ŒG›ŒG”–‹œ“ŒGˆ›GˆG™––”G›Œ”—Œ™ˆ›œ™ŒG—“ˆŠŒUG
ŠPG {ŒG –“›ˆŽŒG –G ‰ŒŽ•••ŽG Œ“ŒŠ›™ŠG ‹šŠˆ™ŽŒG ”ˆ G –Œ™G ›ŒG •–™”ˆ“G –“›ˆŽŒG
‰ŒŠˆœšŒG –G “Œˆ’ˆŽŒG Šœ™™Œ•›G ™–”G ˆ——™–ˆŠG Š–•‹œŠ›–™G ‰ G ›–G ‹™ˆžG “œ”—G ™Œˆ‹G
“Œˆ‹G“•ŒGˆ™–œ•‹UG
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:16
P-511-537(V:2)
PD057VT2
‹PGpGsjkG—ˆ•Œ“G‰™Œˆ’šSG›GšG—–šš‰“ G›ˆ›G›ŒG“˜œ‹GŠ™ š›ˆ“GŒšŠˆ—ŒšG™–”G›ŒG
—ˆ•Œ“UGh–‹G—œ››•ŽG›G•›–GŒ ŒšG–™G”–œ›UG~Œ•G“˜œ‹GŠ™ š›ˆ“Gš›Š’šG–•Gˆ•‹šSG
Š“–›ŒšG–™GŒŒ›UG~ˆšG›G–œ›G””Œ‹ˆ›Œ“ Gž›Gš–ˆ—UG
ŒPGv‰šŒ™ŒGˆ““G–›Œ™G—™ŒŠˆœ›–•ˆ™ G™Œ˜œ™Œ”Œ•›šG•Gˆ•‹“•ŽGŽŒ•Œ™ˆ“GŒ“ŒŠ›™–•ŠG
Š–”—–•Œ•›šUG
PGw“ŒˆšŒGˆ‹‘œš›G›ŒG–“›ˆŽŒG–GŠ–””–•GŒ“ŒŠ›™–‹ŒGˆšG”ˆ›Œ™ˆ“G–Gˆ››ˆŠ”Œ•›G‰ G
XG”–‹œ“ŒUG
XZT\PGw–“
\PGw–“ˆ
™¡Œ™G”ˆ™’G
ˆ™¡Œ™G”ˆ™’
{ŒG—–“ˆ™¡Œ™G”ˆ™’GšG›–G‹ŒšŠ™‰ŒG›ŒG‹™ŒŠ›–•G–Gž‹ŒGŒžGˆ•Ž“ŒG“”G–žG›–G
”ˆ›ŠGœ—Gž›G›ŒG™œ‰‰•ŽG‹™ŒŠ›–•UG
Figure 13-1 the way to peel off protective film
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:17
P-511-537(V:2)
PD057VT2
14. Reliability Test
No
Test Item
Test Condition
1 High Temperature Storage Test
Ta = +80к, 240 hrs
2 Low Temperature Storage Test
Ta = -40к, 240 hrs
3 High Temperature Operation Test
Ta = +70к, 240 hrs
4 Low Temperature Operation Test
Ta = -30к, 240 hrs
5
6
Remark
High Temperature & High Humidity Ta = +60к, 90%RH, 240 hrs
Operation Test
(No Condensation)
Thermal Cycling Test
-20к+70к, 200 Cycles
(non-operating)
30 min 30 min
Frequency: 10 ~ 57 HZ /Vibration Width:0.075mm
2
58-500 Hz / Gravity: 9.8m/s
Sweep time: 11 minutes
Test period: 3 hrs for each direction of X, Y, Z
Gravity: 490m/s2 * 6ms
Direction: ̈́X, ̈́Y, ̈́Z
3 times for each direction
Vibration Test
7 (non-operating)
Shock Test
8 (non-operating)
150pFΔ330Ө
Electrostatic Discharge Test
9
(non-operating)
AirΚ±15KVΙContactΚ±8KV
10 times/pointΔ9 points/panel face
Ta: ambient temperature
Note: The protective film must be removed before temperature test
[Criteria]
In the standard conditions, there is not display function NG issue occurred.
(IncludingΚline defect, no image) All the cosmetic specification is judged before
the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:18
P-511-537(V:2)
PD057VT2
15. Packing Diagram
߻ᙩሽ๳!QJOL
‫ݼ‬ᙩሽ
‫ر‬ᄛሶࣨᒷᓢ‫ޗ‬
Ղ።,ࢍஆ
ց֜ઝ‫ैݾ‬ٝ‫ૻڶ‬ֆ‫׹‬
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:19