PD050QT2 - Zettler Electronics

P-511-461(V:1)
PD050QT2
Version : 1.0
TECHNICAL SPECIFICATION
MODEL NO : PD050QT2
The content of this information is subject to be changed without notice.
Please contact PVI or its agent for further information.
Customer’s Confirmation
Customer
Date
By
PVI’s Confirmation
Confirmed By
Prepared By
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1
P-511-461(V:1)
PD050QT2
Revision History
Rev.
0.1
1.0
Eng.
Sarah
Sarah
Issued
Date Revised
Contents
July 09, 2007
Preliminary
Oct 24, 2007
Add Page 13
12. Optical Characteristics data
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2
P-511-461(V:1)
PD050QT2
TECHNICAL SPECIFICATION
CONTENTS
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ITEM
Cover
Revision History
Contents
Application
Features
Mechanical Specifications
Mechanical Drawing of TFT-LCD module
Input / Output Terminals
Pixel Arrangement
Absolute Maximum Ratings
Electrical Characteristics
Display Color and Gray Scale Reference
Interface Timing
Power On Sequence
Optical Characteristics
Handling Cautions
Reliability Test
Block Diagram
Packing
PAGE
1
2
3
4
4
4
5
6
7
7
8
9
10
13
13
16
17
18
19
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3
P-511-461(V:1)
PD050QT2
1. Application
This data sheet applies to a color TFT LCD module, PD050QT2. This module applies to OA
product, car TV (must use Analog to Digital driving board), which requires high quality flat panel
display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test
conditions.
2. Features
. Amorphous silicon TFT LCD panel with LED back-light unit
. Pixel in stripe configuration
. Slim and compact, designed for O/A application
. TTL transmission interface
3. Mechanical Specifications
Parameter
Screen Size
Display Format
Active Area
Pixel Pitch
Pixel Configuration
Display Colors
Surface Treatment
Back-light
Outline Dimension
Weight
Display mode
Gray scale inversion direction
Specifications
5 (diagonal)
320×(RGB)×240
102.72 (H)×75.72 (V)
0.3210(H)×0.3155 (V)
Stripe
262K
Anti-Glare +SWV
24-LED
127.4 (W)×92.7 (H)×12.9 (D)(typ.)
172±10
Normally white
6
(ref to Page 13 viewing angle )
Unit
inch
dot
mm
mm
mm
g
o’clock
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4
P-511-461(V:1)
PD050QT2
B
B'
A
A'
4. Mechanical Drawing of TFT-LCD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5
P-511-461(V:1)
PD050QT2
5. Input / Output Terminals
5-1) TFT-LCD Panel Driving
Connector type: ELCO 08-6210-033-340-800A+ , PIN No 33 pins, pitch=0.5mm
Pin No Symbol
1
GND
2
CK
3
Hsync
4
Vsync
5
GND
6
R0
7
R1
8
R2
9
R3
10
R4
11
R5
12
GND
13
G0
14
G1
15
G2
16
G3
17
G4
18
G5
19
GND
20
B0
21
B1
22
B2
23
B3
24
B4
25
B5
26
GND
27
ENAB
28
VCC
29
VCC
I/O
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
-
30
R/L
I
31
U/D
I
32
33
N/C
GND
-
Description
GND
Clock signal for sampling each data signal
Horizontal synchronous signal(negative)
Vertical synchronous signal(negative)
GND
RED data signal(LSB)
RED data signal
RED data signal
RED data signal
RED data signal
RED data signal(MSB)
GND
GREEN data signal(LSB)
GREEN data signal
GREEN data signal
GREEN data signal
GREEN data signal
GREEN data signal(MSB)
GND
Blue data signal(LSB)
Blue data signal
Blue data signal
Blue data signal
Blue data signal
Blue data signal(MSB)
GND
Signal to settle the horizontal display position(positive)
+3.3V power supply
+3.3V power supply
Horizontal display mode select signal
H:Normal ,L:Left /Right reverse mode
Vertical display mode select signal
L:Normal ,H :Up/Down reverse mode
NC
GND
Remark
Note5-1
Note5-2
Note5-3
Note5-1:The horizontal display start timing is settled in accordance with rising of ENAB signal.
In case ENAB is fixed ”Low”, the horizontal start timing is determined as described in
10-2. Don’t keep ENAB ”High” during operation.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6
P-511-461(V:1)
PD050QT2
Note 5-2/5-3 : The definitions of U/D & R/L
R/L(PIN 30)= Low, U/D(PIN 31)= High
R/L(PIN 30)= High , U/D(PIN 31)= Low
5-2) Backlight driving
Connector type: JST BHSR-02VS-1, PIN No 2 pin
Pin No
1
2
Symbol
+
-
Description
Input terminal (Anode)
Input terminal (Cathode)
Remark
Wire color : Red
Wire Color : Black
6. Pixel Arrangement
R G B R G B R G B 1 st Line
RGB
R G B R G B 2 nd Line
RGB
R G B 3 rd Line
RGB
1 st Pixel
320th pixel
1 Pixel = R G B
RGB
238 th Line
RGBRGB
RGB
239 thLine
RGBRGBRGB
RGB
240 th Line
RGB
7. Absolute Maximum Ratings:
Parameters
Input Voltage
+3.3V supply voltage
Symbol
VI
VCC
Condition
Ta=25℃
Ta=25℃
MAX.
-0.3~+4
0~+3.6
GND=0V, Ta=25℃
Unit
Remark
V
Note7-1
V
Note 7-1:CK,R0~R5,G0~G5,B0~B5,Hsync,Vsync,ENAB,R/L,U/D
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7
P-511-461(V:1)
PD050QT2
8. Electrical Characteristics
8-1) Recommended Operating Conditions:
Item
Supply Voltage
Current Dissipation
Total power consumption
Permissive input ripple voltage
Input voltage(Low)
Input voltage(High)
Vcom Voltage
Symbol
VCC
ICC
PCC
VRF
VIL
VIH
Vcom
Min.
+3.0
128.4
0
0.7 VCC
-
GND=0V, Ta=25℃
Typ.
Max.
Unit
Remark
V
+3.3
+3.6
42.8
mA Note 8-1
141.24 154.08
mW
100
mVp-p VCC=3.3V
0.3 VCC
V
VCC
V
3.55
V
Note 8-1 : To test the current dissipation of VCC, using the “color bars” testing pattern shown as below.
1
2
3
4
5
6
7
8
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
1.
2.
3.
4.
5.
6.
7.
8.
IDD current dissipation testing pattern
8-2) Recommended Driving Condition for Back Light
Parameter
Supply voltage of LED backlight
Supply current of LED backlight
Symbol
VLED1~8
ILED1~8
Backlight Power Consumption
PLED
Note 8-2 : ILED1~8=20mA, Constant Current
Min
-
TYP
20
MAX
(11.0)
-
Unit
V
mA
-
-
1.76
W
GND = 0 V,Ta = 25℃
Remark
Note 8-2
Note 8-3
Note 8-4
Note 8-3 : The LED driving condition is defined for each LED module. (3 LED Serial)
Input current = 20mA * 8 = 160mA
Note 8-4 : PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-7 * ILED-7+VLED-8 * ILED-8
VLED-1
VLED-2
Anode
Cathode
VLED-7
VLED-8
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8
P-511-461(V:1)
PD050QT2
8-3) Power Consumption:
Parameters
LCD Panel Power Consumption
Backlight Power Consumption
Total Power Consumption
Symbol
-
Max.
0.16
1.76
1.92
Unit
W
W
W
Remark
Note 8-5
Note 8-6
Note 8-5: The power consumption for backlight is not included.
Note 8-6: Back light power consumption is calculated by IL×VL.
9. Display Color and Gray Scale Reference
Color
Input Color Data
Green
Red
Blue
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic
Colors
Red
Green
Blue
Black
Red (63)
Green (63)
Blue (63)
Cyan
Magenta
Yellow
White
Red (00)
Red (01)
Red (02)
Darker
↓
Brighter
Red (61)
Red (62)
Red (63)
Green (00)
Green (01)
Green (02)
Darker
↓
Brighter
Green (61)
Green (62)
Green (63)
Blue (00)
Blue (01)
Blue (02)
Darker
↓
Brighter
Blue (61)
Blue (62)
Blue (63)
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
1
0
1
0
0
0
1
1
1
0
1
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
0
1
1
1
0
1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9
P-511-461(V:1)
PD050QT2
10. Interface Timing
10-1) Timing Parameters
AC Electrical Characteristics (VCC =+3.3V,GND=0V,Ta=25℃)
Power supply
CLK
Frequency
Period
HSYNC
Display period
Pulse width
Back-porch
Front-porch
Hpw+Hbp
Hsync-CLK
Period
VSYNC
DENB
R,G,B
Display period
Pulse width
Back-porch
Front-porch
Vpw+Vbp
Horizontal scanning
period
Horizontal display
period
Vertical display
period
Frame cycling
period
CLK-DATA
DATA-CLK
Symbol
VCC
1/tc
tc
Min.
3.0
5
10
-
Typ.
3.3
6.3
158
63.6
400
320
30
38
12
68
16.8
262
240
3
15
6
18
Max.
3.6
7.0
Tc-10
288
-
Unit
V
MHz
ns
us
tc
tc
tc
tc
tc
tc
ns
ms
Hp
Hp
Hp
Hp
Hp
Hp
T1
-
400
-
tc
T2
-
320
-
tc
T3
-
240
-
T1
T4
-
262
288
T1
Dcd
Ddc
10
8
-
-
ns
ns
Hp
Hdp
Hpw
Hbp
Hfp
Hhc
Vp
Vdp
Vpw
Vbp
Vfp
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10
P-511-461(V:1)
PD050QT2
10-2) Timing Diagram
a.1 Input signal range
tc
Dcd
Ddc
R05-R00
G05-G00
B05-B00
DENB
a.2 HSYNC timing
Hp
HSYN
Hpw
Hdp
Hbp
Hfp
R,G,B Vaild data
a.3 CLK,HSYNC relationship
CL
Hhc
HSYN
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11
P-511-461(V:1)
PD050QT2
a.4 VSYNC timing
DENB
a.5 DENB timing
Line 1
Line 480
Line 1
Line 2
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12
P-511-461(V:1)
PD050QT2
11. Power On Sequence
VDD
3.0V
3.0V
Signal*3
0.3V
t2
t1
t3
Back Light ON
OFF
OFF
10ms
10ms
1. 0<t1≦20ms
2. 0<t2≦50ms
3. 0<t3≦1s
12. Optical Characteristics
12-1) Specification:
Ta = 25℃
Parameter
Viewing Angle
Symbol
Horizontal θ21, θ22
θ12
Vertical
θ11
Contrast Ratio
CR
Luminance
L
x
y
Tr
Tf
U
CTK
White Chromaticity
Response time
Rise
Fall
Uniformity
Cross Talk Ratio
LED Life Time
Condition
CR≧10
At optimized
Viewing angle
θ=0°
θ=0°
θ=0°
θ=0°
+25℃
MIN.
55
35
50
TYP.
60
40
55
MAX.
----
400
600
--
500
0.270
0.300
--70
-20000
Unit
deg
deg
deg
Remarks
Note 12-1
Note 12-2
550
-cd/㎡
Note 12-3
0.310 0.350
0.340 0.380
15
30
ms
Note 12-5
25
50
ms
80
-%
Note 12-6
-3.5
%
Note 12-7
30000
-hrs Note 12-4
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13
P-511-461(V:1)
PD050QT2
Note 12-1: The definitions of viewing angles
Note 12-2: CR = Luminance when Testing point is White
Luminance when Testing point is Black
Contrast Ratio is measured in optimum common electrode voltage.
Note 12-3: Topcon BM-7(fast) luminance meter 1° field of view is used in the testing (after 20~30
minutes operation).
Note 12-4: The “LED Life time “ is defined as the module brightness decrease to 50% original
Brightness that the ambient temperature is 25℃ and ILED =20mA.
Note 12-5: The definition of response time :
White
Black
White
100%
90%
Brightness
10%
0%
Tr
Tf
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14
P-511-461(V:1)
PD050QT2
Note 12-6: The uniformity of LCD is defined as
U = The Minimum Brightness of the 9 testing Points
The Maximum Brightness of the 9 testing Points
Luminance meter: BM-5A or BM-7 fast(TOPCON)
Measurement distance: 500 mm +/- 50 mm
Ambient illumination: < 1 Lux
Measuring direction: Perpendicular to the surface of module
The test pattern is white (Gray Level 63).
1/6
2/6
2/6
1/6
1/6
2/6
2/6
1/6
⏐YA-YB⏐ ×100%
YA
YA: Brightness of Pattern A
YB: Brightness of Pattern B
Luminance meter: BM 5A (TOPCON)
Measurement distance: 500 mm +/- 50 mm
Ambient illumination: < 1 Lux
Measuring direction: Perpendicular to the surface of module
Note 12-7: Cross Talk (CTK) =
Pattern A
Pattern B
(Gray Level 31)
(Gray Level 31, central
black box exclusive)
YA
YB
1/3
1/3
1/3
1/3
1/3
1/3
Black
: Measuring Point (A and B are at the same point.)
(Gray Level 0)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15
P-511-461(V:1)
PD050QT2
13. Handling Cautions
13-1) Mounting of module
A) Please power off the module when you connect the input/output connector.
B) Polarizer which is made of soft material and susceptible to flaw must be handled carefully.
C) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It
is recommended to peel off the laminator before use and taking care of static electricity.
13-2) Precautions in mounting
A) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with
soft dry cloth.
B) Wipe off water drops or finger grease immediately. Long contact with water may cause
discoloration or spots.
C) TFT-LCD module uses glass, which breaks or cracks easily if dropped or bumped on hard
surface. Please handle with care.
D) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself
when handling.
13-3) Adjusting module
A) Adjusting volumes on the rear face of the module have been set optimally before shipment.
B) Therefore, do not change any adjusted values. If adjusted values are changed, the
specifications described may not be satisfied.
13-4) Others
A) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours.
B) Store the module at a room temperature place.
C) The voltage of beginning electric discharge may over the normal voltage because of
leakage current from approach conductor by to draw lump read lead line around.
D) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.
Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash
it out immediately with soap.
E) Observe all other precautionary requirements in handling general electronic components.
F) Please adjust the voltage of common electrode as material of attachment by 1 module.
13-5) Polarizer mark
The polarizer mark is to describe the direction of view angle film how to mach up with the
rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16
P-511-461(V:1)
PD050QT2
14. Reliability Test
No
1
2
3
4
5
6
Test Item
High Temperature Storage Test
Low Temperature Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Thermal Cycling Test
(non-operating)
7
Vibration Test
(non-operating)
8
Shock Test
(non-operating)
9
Electrostatic Discharge Test
(non-operating)
Test Condition
Ta = +80℃, 240 hrs
Ta = -30℃, 240 hrs
Ta = +70℃, 240 hrs
Ta = -25℃, 240 hrs
Ta = +60℃, 90%RH, 240 hrs
-25℃→ +70℃, 200 Cycles
30 min 30 min
Frequency:10 ~ 55 HZ
Amplitude:1.5 mm
Sweep time: 11 min
Test Period: 6 Cycles for each direction of X, Y, Z
100G, 6ms
Direction : ±X, ±Y, ±Z
Cycle: 3 times
150pF, 330Ω
Air: ±15KV; Contact: ±8KV
10 times/point, 5 points/panel face
Ta: ambient temperature
Note: The protective film must be removed before temperature test.
[Criteria]
In the standard conditions, there is not display function NG issue occurred. (Including: line defect,
no image). All the cosmetic specification is judged before the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17
P-511-461(V:1)
PD050QT2
15. Block Diagram
SYSTEM
+3.3V
User
signal
input
VDD1
DC-DC
Converter
Gamma
Generator
Vcom
Generator
VGG / VEE
VDD2
Gamma
FPC
Source
Driver IC
5."QVGA
TFT-LCD Panel
Vcom
Gate Driver IC
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18
P-511-461(V:1)
PD050QT2
16. Packing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19