EIM8911-5 8.95-10.6GHz Multi-Stage Power Amplifier ISSUED: 01/21/2009 FEATURES • • • • 8.95– 10.60GHz Operating Frequency Range 37dBm Output Power at 2dB Compression 26.0 dB Typical Power Gain @2dB gain compression Non-Hermetic Metal Flange Package EXCELICS VD1 RF OUT -5V -5V APPLICATIONS • • VD2 EIM8911-5 RF IN GND Point-to-point and point-to-multipoint radio Military Radar Systems Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Tb = 25 °C, 50 ohm, VD1=7V, VD2=10V, Vgg=-5V) SYMBOL F PARAMETER/TEST CONDITIONS Operating Frequency Range MIN TYP 8.95 MAX UNITS 10.6 GHz P2dB Output Power at 2dB Gain Compression 36 37 dBm G2dB Gain @2dB gain compression 24 26 dB Input RL Output RL Input Return Loss -12 -8 dB Output Return Loss -15 -10 dB VD1 Drain Supply Voltage 1 7 V VD2 Drain Supply Voltage 2 10 V IDQ1 Quiescent Drain Current 1 600 mA IDQ2 Quiescent Drain Current 2 1800 Vgg Gate Supply Voltage Rth ∆Tch Thermal Resistance 2000 mA -5 V o 3.4 Channel Temperature Rise C/W 80 ºC Note: Turn on/off sequence is required: ---to turn on: apply -5V on both Vgg first, then +7V and +10V. ---to turn off: turn +7V and +10V off first, then turn -5V off Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 3 Issued January 2009 EIM8911-5 8.95-10.6GHz Multi-Stage Power Amplifier ISSUED: 01/21/2009 MAXIMUM RATINGS @25°C1,2 SYMBOL CHARACTERISTIC ABSOLUTE CONTINUOUS 1,2 VD1 Drain Supply Voltage 1 12V 8V VD2 Drain Supply Voltage 2 14V 10V Vgg Gate Supply Voltage -10V -6 V Igg Gate Current 150mA 50 mA PIN Input Power 17dBm @ 3dB compression TCH Channel Temperature 175°C 165°C TSTG Storage Temperature -65/175°C -65/175°C 36.7W 30.9W PT Notes: Total Power Dissipation 1. Operating the device beyond any of the above rating may reduce MTTF and cause permanent damage. 2. Bias conditions must also satisfy the following equation Vdd*Idd < (TCH –Tb)/RTH Package Dimension and Pin Assignment .920 .412 .120 MIN .206 0.060X0.060 EXCELICS VD1 VD2 EIM8911-5 .827 .669 R0.063 (4 PLCS) RF OUT RF IN .100 -5V -5V .020 GND .063 .412 .157 .920 .177 .004 .105 Dimensions are in inches Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 3 Issued January 2009 EIM8911-5 ISSUED: 01/21/2009 8.95-10.6GHz Multi-Stage Power Amplifier DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 3 of 3 Issued January 2009