EXCELICS EIM1213-4

EIM1213-4
12.75 – 13.25GHz Multi-Stage Power Amplifier
ISSUED 07/02/2007
FEATURES
•
•
•
•
Excelics
12.75– 13.25GHz Operating Frequency Range
35.5dBm Output Power at 1dB Compression
27.0 dB Typical Power Gain @1dB gain compression
-45dBc Typical OIM3 @ each tone Pout 22dBm
EIM1213-4
EIM1011-4
APPLICATIONS
•
•
Point-to-point and point-to-multipoint radio
Military Radar Systems
Caution! ESD sensitive device.
ELECTRICAL CHARACTERISTICS (Tb = 25 °C, 50 ohm, VD1=7V, VD2=10V, Vgg=-5V)
SYMBOL
PARAMETER/TEST CONDITIONS
MIN
TYP
MAX
UNITS
13.25
GHz
Operating Frequency Range
12.75
P1dB
Output Power at 1dB Gain Compression
34.5
35.5
dBm
G1dB
Gain @1dB gain compression
Output 3rd Order Intermodulation Distortion
@∆f=10MHz, Each Tone Pout 22dBm
23
27
dB
-43
-45
dBc
F
OIMD3
Input RL
Output RL
Input Return Loss
-12
-8
dB
Output Return Loss
-15
-10
dB
VD1
Drain Supply Voltage 1
7
V
VD2
Drain Supply Voltage 2
10
V
IDQ1
Quiescent Drain Current 1
380
mA
IDQ2
Quiescent Drain Current 2
1900
Vgg
Gate Supply Voltage
-5
Rth
Thermal Resistance
3
Tb
Operating Base Plate Temperature
- 30
mA
2300
V
o
C/W
+ 80
ºC
Note: Turn on/off sequence is required: ---to turn on: apply -5V on both Vgg first, then +7V and +10V.
---to turn off: turn +7V and +10V off first, then turn -5V off
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
page 1 of 3
Revised July 2007
EIM1213-4
12.75 – 13.25GHz Multi-Stage Power Amplifier
ISSUED 07/02/2007
MAXIMUM RATINGS @25°C1,2
SYMBOL
CHARACTERISTIC
ABSOLUTE
CONTINUOUS
1,2
VD1
Drain Supply Voltage 1
12V
8V
VD2
Drain Supply Voltage 2
14V
10V
Vgg
Gate Supply Voltage
-10V
-6 V
Igg
Gate Current
150mA
50 mA
PIN
Input Power
20dBm
@ 3dB compression
TCH
Channel Temperature
175°C
150°C
TSTG
Storage Temperature
-65/175°C
-65/150°C
42W
35W
PT
Total Power Dissipation
Notes: 1. Operating the device beyond any of the above rating may reduce MTTF and cause permanent damage.
2. Bias conditions must also satisfy the following equation Vdd*Idd < (TCH –Tb)/RTH
Package Dimension and Pin Assignment
Dimensions are in inches
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
page 2 of 3
Revised July 2007
EIM1213-4
ISSUED 07/02/2007
12.75 – 13.25GHz Multi-Stage Power Amplifier
DISCLAIMER
EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE
TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT
ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT
DESCRIBED HEREIN.
LIFE SUPPORT POLICY
EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS
IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS
SEMICONDUCTOR, INC.
AS HERE IN:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for
use provided in the labeling, can be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
page 3 of 3
Revised July 2007