FUJI YA869C04R

http://www.fujisemi.com
YA869C04R
FUJI Diode
Schottky Barrier Diode
Maximum Rating and Characteristics
Maximum ratings (at Ta=25˚C unless otherwise specified.)
Item
Symbols
Repetitive peak reverse voltage
Average output current
Non-repetitive forward surge current**
Operating junction temperature
Storage temperature
Conditions
Ratings
Units
VRRM
-
45
V
Io
50Hz Square wave duty =1/2
Tc = 120˚C
40*
A
Sine wave, 10ms 1shot
IFSM
190
A
Tj
-
150
˚C
Tstg
-
-40 to +150
˚C
Conditions
Note* Out put current of center tap full wave connection.
Note**Rating per element
Electrical characteristics
Item
(at Ta=25˚C unless otherwise specified.)
Maximum
Units
VF
IF =20 A
0.61
V
Reverse current***
IR
VR =VRRM
0.20
mA
Thermal resistance
Rth(j-c)
1.0
˚C/W
Forward voltage***
Symbols
Junction to case
Note*** Rating per element
Mechanical characteristics
Item
Mounting torque
Approximate mass
1
Conditions
Maximum
Units
Recommended torque
0.3 to 0.5
N•m
-
2.0
g
YA869C04R
FUJI Diode
http://www.fujisemi.com
Outline Drawings [mm]
2
YA869C04R
FUJI Diode
http://www.fujisemi.com
Forward Characteristic
Reverse Characteristic
(typ.)
10
5
10
4
(typ.)
Tj=150℃
10
Reverse Current (uA)
Tj=150℃
Tj=125℃
Tj=100℃
1
Tj=25℃
IR
IF
Forward Current
(A)
Tj=125℃
Tj=100℃
103
102
101
Tj= 25℃
0.1
100
10-1
0.01
0.0
0.1
0.2
0.3
0.4
0.5
0.6
10
0.7
20
VR
VF Forward Voltage (V)
Forward Power Dissipation (max.)
30
40
Reverse Voltage
(V)
Reverse Power Dissipation (max.)
1.5
26
24
DC
22
(W)
I0
18
Dissipation
Square wave λ=60°
Square wave λ=120°
Power
Sine wave λ=180°
Square wave λ=180°
10
α
Reverse
DC
8
6
α=180°
0.5
PR
WF
Forward Power Dissipation
λ
12
VR
1.0
16
14
360°
(W)
360°
20
4
2
Per 1element
0
0
2
4
Io
6
8
10
12
14
Average Output Current
16
18
20
0.0
22
0
(A)
5
10
VR
3
15
20
25
Reverse Voltage
30
35
(V)
40
45
YA869C04R
FUJI Diode
http://www.fujisemi.com
Current Derating
Junction Capacitance Characteristic (max.)
(Io-Tc) (max.)
160
150
1000
130
DC
Square wave λ=180°
Sine wave λ=180°
Case Temperature
120
Square wave λ=120°
110
100
Junction Capacitance (pF)
(℃)
140
100
Cj
Tc
Square wave λ=60°
360°
90
I0
80
VR=20V
λ
70
0
5
10
Io
15
20
25
30
35
40
Average Output Current
45
50
55
(A)
10
1
Surge Capability (max.)
100
IFSM
Peak Half - Wave Current
(A)
1000
10
1
10
100
Number of Cycles at 50Hz
4
10
100
VR
Reverse Voltage (V)
1000
YA869C04R
FUJI Diode
http://www.fujisemi.com
Surge Current Ratings (max.)
100
10
1
10
100
1000
tTime (ms) Sinewave
Transient Thermal Impedance (max.)
1
(°C/W)
10
Transient Thermal Impedance
IFSM PeakHAlf-WaveCurrent (A)
1000
Rth(j-c):1.0°C/W
0
10
-1
10
-2
10
-3
10
-2
10
-1
0
10
10
t
5
Time
(sec)
1
10
2
10
YA869C04R
FUJI Diode
http://www.fujisemi.com
WARNING
1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010.
The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this
Catalog, be sure to obtain the latest specifications.
2. A
ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either
express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd.
is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or
warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which
may arise from the use of the applications described herein.
3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor
products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take
adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products
become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction.
4. T
he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has
normal reliability requirements.
• Computers
• OA equipment
• Communications equipment (terminal devices)
• Measurement equipment
• Machine tools
• Audiovisual equipment
• Electrical home appliances
• Personal equipment
• Industrial robots etc.
5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed
below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for
such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's
product incorporated in the equipment becomes faulty.
• Transportation equipment (mounted on cars and ships)
• Trunk communications equipment
• Traffic-signal control equipment
• Gas leakage detectors with an auto-shut-off feature
• Emergency equipment for responding to disasters and anti-burglary devices • Safety devices
• Medical equipment
6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic
equipment (without limitation).
• Space equipment
• Aeronautic equipment
• Nuclear control equipment
• Submarine repeater equipment
7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved.
No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd.
8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before
using the product.
Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in
accordance with instructions set forth herein.
6