FUJI TS802C04R

http://www.fujisemi.com
TS802C04R-TE24R
FUJI Diode
Schottky Barrier Diode
Maximum Rating and Characteristics
Maximum ratings (at Ta=25˚C unless otherwise specified.)
Item
Symbols
Conditions
Ratings
Units
Repetitive peak surge reverse voltage
VRSM
48
V
Repetitive peak reverse voltage
VRRM
-
40
V
Io
50Hz Square wave duty =1/2
Tc = 116 ˚C
10*
A
Sine wave, 10ms 1shot
120
A
Average output current
Non-repetitive forward surge current**
Operating junction temperature
Storage temperature
IFSM
tw=500ns,duty=1/40
Tj
-
150
˚C
Tstg
-
-40 to +150
˚C
Conditions
Maximum
Units
Note* Out put current of center tap full wave connection.
Note**Rating per element
Electrical characteristics
Item
(at Ta=25˚C unless otherwise specified.)
Symbols
Forward voltage***
VF
IF = 4 A
0.55
V
Reverse current***
IR
VR =VRRM
5
mA
Thermal resistance
Rth(j-c)
Junction to case
3
˚C/W
Conditions
Maximum
Units
-
1.6
g
Note*** Rating per element
Mechanical characteristics
Item
Approximate mass
1
TS802C04R-TE24R
FUJI Diode
http://www.fujisemi.com
Outline Drawings [mm]
04
2
TS802C04R-TE24R
FUJI Diode
http://www.fujisemi.com
Forward Characteristic (typ.)
Reverse Characteristic (typ.)
102
100
Tj=150°C
Tj=125°C
101
Tj=100°C
10
Reverse Current (mA)
Tj=125°C
Tj=100°C
Tj=25°C
100
10-1
IR
IF
Forward Current (A)
Tj=150°C
1
Tj=25°C
10-2
10-3
0.1
0.0
0
0.2
0.4
0.6
VF
0.8
1.0
1.2
10
1.4
20
VR
Forward Voltage (V)
30
40
50
Reverse Voltage (V)
Reverse Power Dissipation (max.)
Forward Power Dissipation (max.)
6.0
360°
5.5
VR
I0
5.0
α
3.0
2.5
Square wave λ =60°
(W)
2.0
3.5
5
Square wave λ =120°
Reverse Power Dissipation
(W)
Forward Power Dissipation
4.0
WF
λ
4.5
DC
360°
6
Sine wave λ =180°
Square wave λ =180°
DC
α=180°
3
2
PR
1.5
4
1.0
1
0.5
Per 1element
0
0.0
0
1
2
Io
3
4
Average Output Current
5
6
0
(A)
5
10
15
VR
3
20
25
30
Reverse Voltage
35
40
(V)
45
50
TS802C04R-TE24R
FUJI Diode
http://www.fujisemi.com
Current Derating (Io-Tc) (max.)
Junction Capacitance Characteristic (typ.)
1000
160
150
140
DC
Sine wave λ=180°
Square wave λ=180°
110
Square wave λ=120°
Cj
100
100
Tc
Case Temperature
120
Junction Capacitance (pF)
(°C)
130
Square wave λ=60°
360°
90
I0
80
VR=20V
λ
70
0
2
4
Io
6
8
10
Average Output Current
12
14
16
10
(A)
VR
λ:Conduction angle of forward current for each rectifier element
Io:Output current of center-tap full wave connection
Surge Capability (max.)
IFSM Peak Half - Wave Current (A)
1000
100
10
1
10
100
Number of Cycles at 50Hz
4
100
Reverse Voltage (V)
TS802C04R-TE24R
FUJI Diode
http://www.fujisemi.com
Transient Thermal Impedance (max.)
102
101
Rth j-c:3.0°C/W
100
10-1
10-2
10-1
100
T
Time
5
101
(s)
102
TS802C04R-TE24R
FUJI Diode
http://www.fujisemi.com
WARNING
1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010.
The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this
Catalog, be sure to obtain the latest specifications.
2. A
ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either
express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd.
is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or
warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which
may arise from the use of the applications described herein.
3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor
products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take
adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products
become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction.
4. T
he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has
normal reliability requirements.
• Computers
• OA equipment
• Communications equipment (terminal devices)
• Measurement equipment
• Machine tools
• Audiovisual equipment
• Electrical home appliances
• Personal equipment
• Industrial robots etc.
5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed
below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for
such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's
product incorporated in the equipment becomes faulty.
• Transportation equipment (mounted on cars and ships)
• Trunk communications equipment
• Traffic-signal control equipment
• Gas leakage detectors with an auto-shut-off feature
• Emergency equipment for responding to disasters and anti-burglary devices • Safety devices
• Medical equipment
6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic
equipment (without limitation).
• Space equipment
• Aeronautic equipment
• Nuclear control equipment
• Submarine repeater equipment
7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved.
No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd.
8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before
using the product.
Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in
accordance with instructions set forth herein.
6